CO2 Autogenous Laser Welding - Articles - Scientific Research Publishing

Laser, Universe and Arrow of Time (Articles)

Mitali Konwar, Gauranga Dhar Baruah

Optics and Photonics Journal Vol.9 No.8, August 22, 2019

DOI: 10.4236/opj.2019.98012 901 Downloads 2,161 Views Citations
A Study of Laser Effectiveness in Injured Tissues Regeneration (Articles)

Marcus Vinicius de Mello Pinto, Aline Ronis Sampaio, Miriam Viviane Baron, Carolina Macedo Alves Moreira, Carolina Gonçalves Pinheiro, Michele Paula dos Santos, Andres Felipe Mantilla Santamaria, Cristine Brandenburg, Nathália Ken Pereira Iketani, Mara Alessandra Porto dos Reis Oliveira, Alexandre Sancho, Felice Picariello, Esteban Fortuny, Juliano Tibola, Nilton Petrone Vilardi Junior

Journal of Biosciences and Medicines Vol.9 No.3, March 24, 2021

DOI: 10.4236/jbm.2021.93007 698 Downloads 2,623 Views Citations
Short Pulse Width and High Peak Power 457 nm Deep Blue Laser with V-Type Cavity (Articles)

Zhibin Zhao, Cheng Cheng, Hao Chen, Quan Li, Yi Qu, Guojun Liu, Zhongliang Qiao, Baoxue Bo

Journal of Applied Mathematics and Physics Vol.9 No.11, November 30, 2021

DOI: 10.4236/jamp.2021.911192 295 Downloads 1,205 Views Citations
Healing Mechanism and Osteogenic Capacity of Bovine Bone Mineral—Human Amniotic Mesenchymal Stem Celland Autogenous Bone Graft in Critical Size Mandibular Defect (Articles)

David B. Kamadjaja, Purwati, Fedik A. Rantam, Ferdiansyah, D. Coen Pramono

Journal of Biomedical Science and Engineering Vol.8 No.10, October 27, 2015

DOI: 10.4236/jbise.2015.810070 4,659 Downloads 6,182 Views Citations
Dissimilar Welding of Superduplex Stainless Steel/HSLA Steel for Offshore Applications Joined by GTAW (Articles)

Bravo Ivan Mendoza, Zepeda Cuauhtemoc Maldonado, Hernandez Apolinar Albiter, Piedras Eduardo Robles

Engineering Vol.2 No.7, July 23, 2010

DOI: 10.4236/eng.2010.27069 13,059 Downloads 25,310 Views Citations
Time-Frequency Entropy Analysis of Arc Signal in Non-Stationary Submerged Arc Welding (Articles)

Kuanfang He, Siwen Xiao, Jigang Wu, Guanbin Wang

Engineering Vol.3 No.2, March 18, 2011

DOI: 10.4236/eng.2011.32013 4,964 Downloads 9,539 Views Citations
Taguchi Optimization of Process Parameters in Friction Stir Welding of 6061 Aluminum Alloy: A Review and Case Study (Articles)

Mohamadreza Nourani, Abbas S. Milani, Spiro Yannacopoulos

Engineering Vol.3 No.2, March 18, 2011

DOI: 10.4236/eng.2011.32017 12,650 Downloads 27,423 Views Citations
Study on Evaluation Method of Aluminum alloy Pulse MIG Welding Stability Based on Arc Voltage Probability Density (Articles)

Jing Nie, Xiao-Feng Meng, Yu Shi

Journal of Signal and Information Processing Vol.2 No.3, August 12, 2011

DOI: 10.4236/jsip.2011.23020 6,151 Downloads 10,761 Views Citations
Parametric Optimization of Gas Metal Arc Welding Processes by Using Factorial Design Approach (Articles)

Manoj Singla, Dharminder Singh, Dharmpal Deepak

Journal of Minerals and Materials Characterization and Engineering Vol.9 No.4, April 20, 2010

DOI: 10.4236/jmmce.2010.94026 9,925 Downloads 17,506 Views Citations
Fatigue Crack Growth on Double Butt Weld with Toe Crack of Pipelines Steel (Articles)

Féthi Hadjoui, Mustapha Benachour, Mohamed Benguediab

Materials Sciences and Applications Vol.3 No.9, September 26, 2012

DOI: 10.4236/msa.2012.39085 6,606 Downloads 10,680 Views Citations
Fabrication of Sn Coatings on Alumina Balls by Mechanical Coating Technique and Relevant Process Analysis (Articles)

Liang Hao, Yun Lu, Hiromasa Sato, Kazuki Chiba

Advances in Materials Physics and Chemistry Vol.2 No.4B, January 16, 2013

DOI: 10.4236/ampc.2012.24B033 6,229 Downloads 8,082 Views Citations
Determination of Residual Stresses Numerically Obtained in ASTM AH36 Steel Welded by TIG Process (Articles)

Pablo Batista Guimarães, Paulo Marcelo Almeida Pedrosa, Yogendra Prasad Yadava, José Maria Andrade Barbosa, Aníbal Veras Siqueira Filho, Ricardo Artur Sanguinetti Ferreira

Materials Sciences and Applications Vol.4 No.4, April 30, 2013

DOI: 10.4236/msa.2013.44033 5,666 Downloads 8,731 Views Citations
Plastic Deformation Mechanisms of Base Material and Friction Stir Welded AZ31B-H24 Magnesium Alloy (Articles)

Michael Regev, Stefano Spigarelli

Materials Sciences and Applications Vol.4 No.6, May 30, 2013

DOI: 10.4236/msa.2013.46046 4,461 Downloads 7,544 Views Citations
Pulse-Impact on Microstructure of Liquid-Phase-Pulse-Impact Diffusion Welded Joints of Particle Reinforcement Aluminum Matrix Composites at Various Temperatures (Articles)

Kelvii Wei Guo

Engineering Vol.5 No.7, July 15, 2013

DOI: 10.4236/eng.2013.57069 3,221 Downloads 5,805 Views Citations
Distribution of Electromagnetic Force of Square Working Coil for High-Speed Magnetic Pulse Welding Using FEM (Articles)

Ji-Yeon Shim, Bong-Yong Kang

Materials Sciences and Applications Vol.4 No.12, December 31, 2013

DOI: 10.4236/msa.2013.412109 6,098 Downloads 8,857 Views Citations
An Electrothermal Model Based Adaptive Control of Resistance Spot Welding Process (Articles)

Ziyad Kas, Manohar Das

Intelligent Control and Automation Vol.6 No.2, May 22, 2015

DOI: 10.4236/ica.2015.62014 5,022 Downloads 6,658 Views Citations
Optimization of Gas Metal Arc Welding Process Parameters Using Standard Deviation (SDV) and Multi-Objective Optimization on the Basis of Ratio Analysis (MOORA) (Articles)

Joseph Achebo, William Ejenavi Odinikuku

Journal of Minerals and Materials Characterization and Engineering Vol.3 No.4, June 18, 2015

DOI: 10.4236/jmmce.2015.34032 3,792 Downloads 5,968 Views Citations
Microstructure and Corrosion Properties of the Plasma-MIG Welded AA5754 Automotive Alloy (Articles)

A. Abouarkoub, G. E. Thompson, X. Zhou, G. Scamans

Journal of Minerals and Materials Characterization and Engineering Vol.3 No.4, June 30, 2015

DOI: 10.4236/jmmce.2015.34034 3,248 Downloads 4,363 Views Citations
A Successful Experience of International Training and Education in Manufacturing (Articles)

L. Quintino, E. Assunção, R. M. Miranda

Creative Education Vol.8 No.1, January 13, 2017

DOI: 10.4236/ce.2017.81003 1,801 Downloads 3,573 Views Citations
This article belongs to the Special Issue on Internationalisation and Globalisation of Education
A Finite Element Model to Investigate the Impact of Torch Angle on an Autogenous TIG Welding Process (Articles)

Richard Turner

World Journal of Engineering and Technology Vol.5 No.4, November 28, 2017

DOI: 10.4236/wjet.2017.54062 1,433 Downloads 3,476 Views Citations

First <...567 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies