3-D Printing - Articles - Scientific Research Publishing

Morphological, Biological and Physicochemical Evaluation of ABS-Based Systems Containing Graphene Obtained by 3D Printing via Solution (Articles)

Antônio Carlos Santos Thiele, Maria Inês Bruno Tavares

Materials Sciences and Applications Vol.13 No.6, June 29, 2022

DOI: 10.4236/msa.2022.136023 363 Downloads 1,386 Views Citations
Effect of Acetone Vapor Smoothing Process on Surface Finish and Geometric Accuracy of Fused Deposition Modeling ABS Parts (Articles)

Viviane Pestano, Mariana Pohlmann, Fabio Pinto da Silva

Journal of Materials Science and Chemical Engineering Vol.10 No.10, October 24, 2022

DOI: 10.4236/msce.2022.1010001 393 Downloads 2,425 Views Citations
Investigating the Use of 3D Printing in Fine Arts Education: A Case Study on Student Artistic Development (Articles)

Hongye Zhang

Art and Design Review Vol.12 No.4, October 30, 2024

DOI: 10.4236/adr.2024.124020 177 Downloads 1,461 Views Citations
Research Progress of 3D Printing Combined with Virtual Reality Technology in Medical Education Practice: A Bibliometric Analysis Based on Web of Science (Articles)

Shiqi Xie, Tao Liu, Jia Cheng, Yumei Chen

Creative Education Vol.16 No.9, September 29, 2025

DOI: 10.4236/ce.2025.169091 77 Downloads 560 Views Citations
Alignment of the European Green Deal, the Sustainable Development Goals and the European Semester Process: Method and Application (Articles)

Phoebe Koundouri, Stathis Devves, Angelos Plataniotis

Theoretical Economics Letters Vol.11 No.4, August 18, 2021

DOI: 10.4236/tel.2021.114049 1,139 Downloads 6,426 Views Citations
DNA fingerprinting of Bacillus cereus from diverse sources by restriction fragment length polymorphism analysis (Articles)

Swarnakaran Hemalatha, Narasimhan Banu

Advances in Bioscience and Biotechnology Vol.1 No.2, June 30, 2010

DOI: 10.4236/abb.2010.12019 8,055 Downloads 15,651 Views Citations
Ultraviolet Protection, Flame Retardancy and Antibacterial Properties of Treated Polyester Fabric Using Plasma-Nano Technology (Articles)

Wafaa M. Raslan, Usama S. Rashed, Hanan El-Sayad, Azza A. El-Halwagy

Materials Sciences and Applications Vol.2 No.10, October 17, 2011

DOI: 10.4236/msa.2011.210194 8,182 Downloads 15,124 Views Citations
New Silica Coating Pigment for Inkjet Papers from Mining Industry Sidestreams (Articles)

Taina Lamminmäki, Eija Kenttä, Hille Rautkoski, John Bachér, Sebastian Teir, John Kettle, Juha Sarlin

Journal of Surface Engineered Materials and Advanced Technology Vol.3 No.3, July 12, 2013

DOI: 10.4236/jsemat.2013.33030 7,216 Downloads 12,212 Views Citations
Network Based Technology Roadmapping for Future Markets: Case of 3D Printing (Articles)

Katherine Tucker, David Tucker, James Eastham, Elizabeth Gibson, Sumir Varma, Tugrul Daim

Technology and Investment Vol.5 No.3, August 18, 2014

DOI: 10.4236/ti.2014.53014 5,807 Downloads 8,568 Views Citations
3D Software Technology, Applicable in Elaboration of the Spatial Face Gear Drives for Incorporation into Robot Systems (Articles)

Emilia Abadjieva, Valentin Abadjiev, Detelina Ignatova

World Journal of Engineering and Technology Vol.4 No.3D, October 20, 2016

DOI: 10.4236/wjet.2016.43D012 1,643 Downloads 3,185 Views Citations
Additive Manufacturing: The Most Promising Technology to Alter the Supply Chain and Logistics (Articles)

Mohsen Attaran

Journal of Service Science and Management Vol.10 No.3, May 4, 2017

DOI: 10.4236/jssm.2017.103017 10,087 Downloads 18,714 Views Citations
This article belongs to the Special Issue on Supply Chain Management
Found Different Attitude Fracture Characteristics of the NMR Curve by Application of 3D Printing Samples (Articles)

Minggao Luo, Baoxin Chen, Maoshu Luo, Fenglai Yang, Nancy Song, Binghui Song

Journal of Geoscience and Environment Protection Vol.5 No.7, July 28, 2017

DOI: 10.4236/gep.2017.57017 1,000 Downloads 2,218 Views Citations
The Effects of Build Parameters and Strain Rate on the Mechanical Properties of FDM 3D-Printed Acrylonitrile Butadiene Styrene (Articles)

Kemar Hibbert, Grant Warner, Celeste Brown, Olusegun Ajide, Gbadebo Owolabi, Amin Azimi

Open Journal of Organic Polymer Materials Vol.9 No.1, January 31, 2019

DOI: 10.4236/ojopm.2019.91001 1,711 Downloads 4,817 Views Citations
Formation of Copper Nickel Bimetallic Nanoalloy Film Using Precursor Inks (Articles)

Chaitanya G. Mahajan, Amanda Marotta, Bruce E. Kahn, Mark Irving, Surendra Gupta, Richard Hailstone, Scott A. Williams, Denis Cormier

Materials Sciences and Applications Vol.10 No.4, April 24, 2019

DOI: 10.4236/msa.2019.104026 1,317 Downloads 3,668 Views Citations
Oxygen Plasma/Bismuth Modified Inkjet Printed Graphene Electrode for the Sensitive Simultaneous Detection of Lead and Cadmium (Articles)

Léopoldine Sonfack Guenang, Prachi Gupta, Victor Costa Basseto, Milica Jovic, Ervice Ymélé, Andreas Lesch, Hubert Girault, Ignas Kenfack Tonlé

American Journal of Analytical Chemistry Vol.11 No.1, January 14, 2020

DOI: 10.4236/ajac.2020.111001 967 Downloads 2,150 Views Citations
Exploring the Potential to Uniquely Manufacture Curved VARTM Epoxy Composites Using Cost-Effective FDM Molds (Articles)

Syed Monis Raza Kazmi, Jens Schuster, Johannes Lutz

Open Journal of Composite Materials Vol.10 No.3, June 19, 2020

DOI: 10.4236/ojcm.2020.103004 971 Downloads 2,624 Views Citations
Recipe Development and Mechanical Characterization of Carbon Fibre Reinforced Recycled Polypropylene 3D Printing Filament (Articles)

Mwambe Polline, James M. Mutua, Thomas Ochuku Mbuya, Kyekyere Ernest

Open Journal of Composite Materials Vol.11 No.3, July 30, 2021

DOI: 10.4236/ojcm.2021.113005 740 Downloads 2,852 Views Citations
3D Vector Reconstruction of the Muscles of the Ventral Region of the Neck from Anatomical Sections of Korean Visible Human at the Paris Descartes Anatomy Laboratory (Articles)

Abdoulaye Kanté, Jean François Uhl, Mariam Daou, Babou Ba, Tata Touré, Ousmane Touré, Yatera Demba, Moumouna Koné, Drissa Traoré, ouhoum Ongoïba, Abdel Karim Koumaré

Forensic Medicine and Anatomy Research Vol.10 No.1, December 31, 2021

DOI: 10.4236/fmar.2022.101003 349 Downloads 1,489 Views Citations
Recycled, Bio-Based, and Blended Composite Materials for 3D Printing Filament: Pros and Cons—A Review (Articles)

Khanh Q. Nguyen, Pascal Y. Vuillaume, Lei Hu, Jorge López-Beceiro, Patrice Cousin, Saïd Elkoun, Mathieu Robert

Materials Sciences and Applications Vol.14 No.3, March 10, 2023

DOI: 10.4236/msa.2023.143010 1,163 Downloads 7,553 Views Citations
Development of an Intelligent Queue Manager That Takes Account of the Social and Health Context (Articles)

Jupiter Ndiaye, Ousmane Sow, Oumar Diallo, Ababacar Sadikh Faye, Youssou Traore, Mame Andallah Diop, Abdoulaye Diop

Engineering Vol.15 No.9, September 27, 2023

DOI: 10.4236/eng.2023.159040 295 Downloads 1,052 Views Citations

First <...345 >Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies