metallurgy - Articles - Scientific Research Publishing

Development of Iron Based Brake Friction MMC Used for Military Aircraft Application by A New P/M Route (Articles)

Mohammad Asif, K. Chandra, P.S. Misra

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.8, June 27, 2011

DOI: 10.4236/jmmce.2011.108054 8,410 Downloads 11,440 Views Citations
Development of Aluminium Based Hybrid Metal Matrix Composites for Heavy Duty Applications (Articles)

M. Asif, K. Chandra, P.S. Misra

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.14, November 25, 2011

DOI: 10.4236/jmmce.2011.1014105 10,617 Downloads 18,165 Views Citations
The Effect of Time, Percent of Copper and Nickel on Naturally Aged Al-Cu-Ni Cast Alloys (Articles)

Mohammad M. Hamasha, Ahmad T. Mayyas, Adel M. Hassan, Mohammed T. Hayajneh

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.2, February 20, 2012

DOI: 10.4236/jmmce.2012.112009 6,323 Downloads 8,278 Views Citations
Effect of 45S5 Bio-Glass Particles on Physical Properties and Corrosion Resistance of the Mg-5Zn Matrix Composite (Articles)

M. A. F. Zaludin, S. B. Jamaludin, M. S. Idris, N. A. Llah

Open Journal of Metal Vol.4 No.1, March 27, 2014

DOI: 10.4236/ojmetal.2014.41001 4,890 Downloads 7,802 Views Citations
Stainless Steel Failures: Bridging Metallurgy and Practice—Lessons from Case Studies and Industrial Material Selection (Articles)

Kok Toong Leong

World Journal of Engineering and Technology Vol.14 No.1, January 29, 2026

DOI: 10.4236/wjet.2026.141011 115 Downloads 753 Views Citations
Hot Forging and Hot Pressing of AlSi Powder Compared to Conventional Powder Metallurgy Route (Articles)

Sayed Moustafa, Walid Daoush, Ahmed Ibrahim, Erich Neubaur

Materials Sciences and Applications Vol.2 No.8, August 24, 2011

DOI: 10.4236/msa.2011.28152 6,839 Downloads 12,227 Views Citations
Powder Metallurgical Fabrication and Microstructural Investigations of Aluminum/Steel Functionally Graded Material (Articles)

Mahmoud M. Nemat-Alla, Moataz H. Ata, Mohamed R. Bayoumi, Wael Khair-Eldeen

Materials Sciences and Applications Vol.2 No.12, December 22, 2011

DOI: 10.4236/msa.2011.212228 7,266 Downloads 12,696 Views Citations
Influence of Nanocrystalline ZrO₂ Additives on the Fracture Toughness and Hardness of Spark Plasma Activated Sintered WC/ZrO₂ Nanocomposites Obtained by Mechanical Mixing Method (Articles)

M. Sherif El-Eskandarany, Hesham M. A. Soliman, M. Omoric

Open Journal of Composite Materials Vol.2 No.1, January 17, 2012

DOI: 10.4236/ojcm.2012.21001 5,455 Downloads 10,472 Views Citations
Studies on Weldability of Powder-Processed Fe-0.35P-0.15C Alloy Using Gas Tungsten Arc Welding Process (Articles)

Yashwant Mehta, Shefali Trivedi, K. Chandra, P.S. Mishra

Journal of Minerals and Materials Characterization and Engineering Vol.9 No.3, March 20, 2010

DOI: 10.4236/jmmce.2010.93018 6,781 Downloads 8,759 Views Citations
Fabrication and Investigation of Damping Properties of Nano Particulate Composites (Articles)

K. S. Umashankar, K. V. Gangadharan, Vijay Desai, B. Shivamurthy

Journal of Minerals and Materials Characterization and Engineering Vol.9 No.9, September 20, 2010

DOI: 10.4236/jmmce.2010.99059 6,216 Downloads 8,738 Views Citations
Fabrication and Characterization of Tungsten Heavy Alloys Using Chemical Reduction and Mechanical Alloying Methods (Articles)

Zeinab Abdel Hamid, Sayed Farag Moustafa, Walid Mohamed Daoush, Fatema Abdel Mouez, Mona Hassan

Open Journal of Applied Sciences Vol.3 No.1, March 29, 2013

DOI: 10.4236/ojapps.2013.31003 7,477 Downloads 14,144 Views Citations
Development of Cu-Exfoliated Graphite Nanoplatelets (xGnP) Metal Matrix Composite by Powder Metallurgy Route (Articles)

Syed Nasimul Alam, Lailesh Kumar, Nidhi Sharma

Graphene Vol.4 No.4, October 19, 2015

DOI: 10.4236/graphene.2015.44010 5,178 Downloads 7,256 Views Citations
Fabrication, Microstructure, Thermal and Electrical Properties of Copper Heat Sink Composites (Articles)

Walid Daoush, Ahmed Swidan, Gamal Abd El-Aziz, Mohamed Abdelhalim

Materials Sciences and Applications Vol.7 No.9, September 26, 2016

DOI: 10.4236/msa.2016.79046 2,304 Downloads 5,342 Views Citations
Effect of Beryllium Aluminum Cyclosilicate on Thermal Expansion Behavior of Al-Based Composites (Articles)

V. Bharat, B. Durga Prasad, K. Venkateswarlu

Journal of Minerals and Materials Characterization and Engineering Vol.5 No.3, May 26, 2017

DOI: 10.4236/jmmce.2017.53012 1,836 Downloads 3,420 Views Citations
Role of Metallurgy in the Localized Corrosion of Carbon Steel (Articles)

Recep Avci, Bret H. Davis, Nathaniel Rieders, Kilean Lucas, Manjula Nandasiri, Dave Mogk

Journal of Minerals and Materials Characterization and Engineering Vol.6 No.6, November 23, 2018

DOI: 10.4236/jmmce.2018.66044 1,837 Downloads 4,739 Views Citations
Low Porosity in Cast Magnesium Welds by Advanced Laser Twin-Spot Welding (Articles)

Karl Fahlström, Jon Blackburn, Leif Karlsson, Lars-Erik Svensson

Materials Sciences and Applications Vol.10 No.1, January 16, 2019

DOI: 10.4236/msa.2019.101006 1,051 Downloads 2,041 Views Citations
This article belongs to the Special Issue on Material Processing
Electrochemical Behavior of Alumix 321 PM and AA6061 Alloys in 3.5 wt% NaCl Solution by Electrochemical Impedance Spectroscopy Measurements (Articles)

Natacha Rostomov, William Judge, George Jarjoura

Journal of Materials Science and Chemical Engineering Vol.8 No.10, October 29, 2020

DOI: 10.4236/msce.2020.810005 493 Downloads 1,559 Views Citations
The Role of Toyota Production System Methodology in Improving the Efficiency of Metallurgical Enterprises (Articles)

Sementcov Sergei

American Journal of Industrial and Business Management Vol.15 No.10, October 14, 2025

DOI: 10.4236/ajibm.2025.1510069 107 Downloads 714 Views Citations
Evaluation on Microstructure and Mechanical Behaviour of Al6061-Al₂O₃-Gr Hybrid Composites (Articles)

Rajanna Manjunatha, Doddarasinakere Kempaiah Ravishankar, Govinda Panduranga Murthy Setty, Bengaluru Siddalingaiah Rakesh, Chalya Mallappaji Shiva Prasad, Rajesh Kumar

Open Journal of Composite Materials Vol.9 No.3, July 12, 2019

DOI: 10.4236/ojcm.2019.93017 881 Downloads 2,748 Views Citations

First <12>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies