Stainless Steel - Articles - Scientific Research Publishing

ND:YAG Laser Pulses Ablation Threshold of Stainless Steel 304 (Articles)

Mitra Radmanesh, Amirkianoosh Kiani

Materials Sciences and Applications Vol.6 No.7, July 14, 2015

DOI: 10.4236/msa.2015.67065 4,173 Downloads 6,186 Views Citations
In-Situ Hydroelectrothermal Deposition of Silicate Layers on Stainless Steel Surfaces (Articles)

Jaybalan Tamahrajah, Axel Brehm

Advances in Materials Physics and Chemistry Vol.5 No.9, September 8, 2015

DOI: 10.4236/ampc.2015.59038 4,441 Downloads 5,585 Views Citations
Stainless-Steel Thin Film as Passive Radiative Cooling Materials (Articles)

Mourad Benlattar, El Mostafa Oualim, M’hammed Mazroui, Azeddine Mouhsen, Mohmmed Harmouchi

Optics and Photonics Journal Vol.6 No.8, August 22, 2016

DOI: 10.4236/opj.2016.68021 2,136 Downloads 4,224 Views Citations
Co Complexes as a Corrosion Inhibitor for 316 L Stainless Steel in H₂SO₄ Solution (Articles)

Amin Rabiei Baboukani, Ehsan Sharifi, Saeid Akhavan, Ahmad Saatchi

Journal of Materials Science and Chemical Engineering Vol.4 No.9, September 7, 2016

DOI: 10.4236/msce.2016.49003 1,841 Downloads 3,998 Views Citations
Study on the Role of Supersonic Nozzle in Fiber Laser Cutting of Stainless Steel (Articles)

Yijun Zhou, Jilan Kong, Jin Zhang

Materials Sciences and Applications Vol.8 No.1, January 11, 2017

DOI: 10.4236/msa.2017.81006 2,409 Downloads 5,156 Views Citations
This article belongs to the Special Issue on Materials Forming Technology
Effect of MnO on Mineral Composition of CaO-SiO₂-MgO-Al₂O₃-Cr₂O₃ System (Articles)

Yue Yu, Jianli Li, Mengxiong Li, Zhengliang Xue

Journal of Minerals and Materials Characterization and Engineering Vol.5 No.3, May 26, 2017

DOI: 10.4236/jmmce.2017.53011 1,828 Downloads 3,599 Views Citations
Corrosion in Tap Water and Hot Water Supply Facilities of Stainless Steel Type 304 Pipes (Articles)

Noriyuki Tanaka, Shigeru Sato, Ippei Watanabe, Yutaka Yamada, Osamu Sakurada

Materials Sciences and Applications Vol.9 No.1, January 10, 2018

DOI: 10.4236/msa.2018.91005 1,543 Downloads 5,448 Views Citations
This article belongs to the Special Issue on Anti-corrosion Materials，Material Corrosion and Protection
Effects of Electrode Types on the Microstructure, Tensile and Hardness Properties of 304 L Austenitic Stainless Steel Heat-Affected Zone (HAZ) (Articles)

Bolarinwa Johnson Kutelu, Emmanuel Gbolade Adubi, Saliu Ojo Seidu

Journal of Minerals and Materials Characterization and Engineering Vol.6 No.5, August 31, 2018

DOI: 10.4236/jmmce.2018.65038 1,215 Downloads 2,927 Views Citations
Thermomechanical Behavior and Corrosion Resistance of a 316 L Austenitic Stainless Steel (Articles)

Rafael P. Ferreira, Carmem C. F. Nascimento, Gedeon S. Reis, Eden S. Silva, Samuel F. Rodrigues

Materials Sciences and Applications Vol.11 No.4, April 1, 2020

DOI: 10.4236/msa.2020.114015 634 Downloads 2,621 Views Citations
Fatigue Response of Cold-Rolled Type-304 Stainless Steel Foil (Articles)

Thomas P. Kieffer, James I. Hardy

Journal of Minerals and Materials Characterization and Engineering Vol.9 No.1, January 29, 2021

DOI: 10.4236/jmmce.2021.91007 623 Downloads 3,084 Views Citations
Simulation of the Behaviour Laws in the Thermal Affected Zones of the 13Cr-4Ni Martensitic Stainless Steel (Articles)

Marcel Julmard Ongoumaka Yandza, Harmel Obami-Ondon, Christian Tathy

Modern Mechanical Engineering Vol.13 No.4, September 18, 2023

DOI: 10.4236/mme.2023.134005 272 Downloads 945 Views Citations
Stainless Steel Failures: Bridging Metallurgy and Practice—Lessons from Case Studies and Industrial Material Selection (Articles)

Kok Toong Leong

World Journal of Engineering and Technology Vol.14 No.1, January 29, 2026

DOI: 10.4236/wjet.2026.141011 115 Downloads 751 Views Citations
Corrosion Behavior of 18/8 Stainless Steel and Nickel-Plated Low Carbon Steel in Cassava Fluid (Articles)

O.O. Oluwole, P.O. Atanda, O.A. Odekunbi, E. Odegbaju

Journal of Minerals and Materials Characterization and Engineering Vol.8 No.10, October 20, 2009

DOI: 10.4236/jmmce.2009.810069 7,368 Downloads 10,181 Views Citations
Comparative Study of Corrosion Sensitivity of Selected Ferrous Metals in Crude Oil (Articles)

O. Ogundare, I.M. Momoh, O.J. Akinribide, A.R. Adetunji, J.O. Borode, S.O.O. Olusunle, O.O. Adewoye

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.6, June 15, 2012

DOI: 10.4236/jmmce.2012.116040 6,212 Downloads 8,173 Views Citations
Effect of Formation of Concentrated Stainless Steel Layer by Thermochemical Reaction and Addition of Hydrocarbon Gas on Sintered Part (Articles)

Sang-Gweon Kim, Kuk-Hyun Yeo, Jae-Hoon Lee, Yong-Ki Cho, Masahiro Okumiya

Advances in Materials Physics and Chemistry Vol.8 No.5, May 30, 2018

DOI: 10.4236/ampc.2018.85015 1,366 Downloads 2,715 Views Citations
Study of Gallium Plating of Metal Electrodes (Articles)

S. V. Gladyshev, R. A. Abdulvaliev, K. O. Beisembekova, G. Sarsenbay

Journal of Materials Science and Chemical Engineering Vol.1 No.5, November 7, 2013

DOI: 10.4236/msce.2013.15008 3,168 Downloads 6,002 Views Citations
Refining bioreactor design using autoclavable glass bonding (Articles)

Cornelia Bähr, Elisabeth Stammen, Sarah Zahlten, Stefan Böhm, Klaus Dilger, Jochen Büchs

Advances in Bioscience and Biotechnology Vol.2 No.4, August 16, 2011

DOI: 10.4236/abb.2011.24034 5,331 Downloads 10,605 Views Citations
Effect of Electrode Materials on Electric Discharge Machining of 316 L and 17 - 4 PH Stainless Steels (Articles)

Subramanian Gopalakannan, Thiagarajan Senthilvelan

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.7, July 25, 2012

DOI: 10.4236/jmmce.2012.117053 9,339 Downloads 13,840 Views Citations
Study on Factors Effecting Weld Pool Geometry of Pulsed Current Micro Plasma Arc Welded AISI 304L Austenitic Stainless Steel Sheets Using Statistical Approach (Articles)

Kondapalli Siva Prasad, Chalamalasetti Srinivasa Rao, Damera Nageswara Rao

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.8, August 20, 2012

DOI: 10.4236/jmmce.2012.118068 7,338 Downloads 10,010 Views Citations
Equal-Channel Angular Pressing as a New Processing to Control the Microstructure and Texture of Metallic Sheets (Articles)

Tong Xiao, Hiroyuki Miyamoto, Toshiyuki Uenoya

Materials Sciences and Applications Vol.3 No.9, September 26, 2012

DOI: 10.4236/msa.2012.39086 5,999 Downloads 9,590 Views Citations

First <123 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies