IC Fabrication Technology - Articles - Scientific Research Publishing

Characteristics of Yarn and Fabric Made out of Nanofibers (Articles)

S. A. Hosseini Ravandi, R. Bayat Tork, F. Dabirian, A. A. Gharehaghaji, A. Sajjadi

Materials Sciences and Applications Vol.6 No.1, January 21, 2015

DOI: 10.4236/msa.2015.61013 3,971 Downloads 6,492 Views Citations
Identification of Optimum Composition and Mechanical Properties of Al-Ni Metal Matrix Composite (Articles)

Manoj Kumar Pal, Simranjeet Singh Sandhu, Rohan Kalia, Arka Ghosh

Journal of Minerals and Materials Characterization and Engineering Vol.3 No.4, July 8, 2015

DOI: 10.4236/jmmce.2015.34035 3,953 Downloads 6,195 Views Citations
Studies on Production Planning of Dispersion Type U₃Si₂-Al Fuel in Plate-Type Fuel Elements for Nuclear Research Reactors (Articles)

Miguel Luiz Miotto Negro, Michelangelo Durazzo, Marco Aurélio de Mesquita, Elita Fontenele Urano de Carvalho, Delvonei Alves de Andrade

World Journal of Nuclear Science and Technology Vol.6 No.4, September 28, 2016

DOI: 10.4236/wjnst.2016.64023 2,469 Downloads 4,139 Views Citations
Laser-Based Fabrication of Nanofoam inside a Hollow Capillary (Articles)

Alexander F. Courtier, James A. Grant-Jacob, Rand Ismaeel, Daniel J. Heath, Gilberto Brambilla, William J. Stewart, Robert W. Eason, Ben Mills

Materials Sciences and Applications Vol.8 No.12, November 3, 2017

DOI: 10.4236/msa.2017.812060 1,085 Downloads 2,233 Views Citations
This article belongs to the Special Issue on Laser Processing of Materials
Design and Fabrication of Aluminum Cladding and Curtain Wall of a Sports Club (Articles)

Muhammad Tayyab Naqash

Open Journal of Civil Engineering Vol.9 No.1, February 21, 2019

DOI: 10.4236/ojce.2019.91001 4,895 Downloads 16,506 Views Citations
Laser Polishing of Laser Powder Bed Fusion AlSi10Mg Parts—Influence of Initial Surface Roughness on Achievable Surface Quality (Articles)

Markus Hofele, Andre Roth, Jochen Schanz, David K. Harrison, Anjali K. M. De Silva, Harald Riegel

Materials Sciences and Applications Vol.12 No.1, January 20, 2021

DOI: 10.4236/msa.2021.121002 1,274 Downloads 3,804 Views Citations
This article belongs to the Special Issue on Material Surface Engineering
Trace Metal Leaching from Cookware Locally Fabricated from Scrap Metal: A Case Study of Ntungamo District, Uganda (Articles)

Samuel Habimaana, Hannington Gumisiriza, Grace Birungi

American Journal of Analytical Chemistry Vol.13 No.9, September 27, 2022

DOI: 10.4236/ajac.2022.139022 356 Downloads 2,239 Views Citations
Pathways to Formalization: Exploring Support Systems for Informal Micro-Entrepreneurs in the Metal Manufacturing Sector in Zimbabwe (Articles)

Onias Sanangura, Bupe Getrude Mutono-Mwanza

Open Journal of Business and Management Vol.13 No.3, May 14, 2025

DOI: 10.4236/ojbm.2025.133086 108 Downloads 643 Views Citations
New Approach on Development a Dual Axis Solar Tracking Prototype (Articles)

Nader Barsoum, Rinoe Nizam, Elvin Gerard

Wireless Engineering and Technology Vol.7 No.1, November 26, 2015

DOI: 10.4236/wet.2016.71001 10,894 Downloads 14,933 Views Citations
Analysis, Design, and Test of CDMA LFSR with Offset Mask Using Standard ICs (Articles)

Mouhamed Fadel Diagana, Serigne Bira Gueye

Engineering Vol.8 No.4, April 28, 2016

DOI: 10.4236/eng.2016.84019 2,296 Downloads 3,696 Views Citations
On a Parasitic Bipolar Transistor Action in a Diode ESD Protection Device (Articles)

Jin Young Choi

Circuits and Systems Vol.7 No.9, July 19, 2016

DOI: 10.4236/cs.2016.79199 1,977 Downloads 4,137 Views Citations
Path Integral Molecular Dynamics Simulation on Atomic Distribution in Amorphized Ice Ic (Articles)

Naoka Sato, Kenichi Kinugawa

Natural Science Vol.8 No.11, November 14, 2016

DOI: 10.4236/ns.2016.811048 1,955 Downloads 4,248 Views Citations
Discharge Characteristics of a Triple-Well Diode-String ESD Clamp (Articles)

Jin Young Choi

Circuits and Systems Vol.9 No.5, May 31, 2018

DOI: 10.4236/cs.2018.95008 1,172 Downloads 2,838 Views Citations
Periodic Solitary Wave Solutions of the (2 + 1)-Dimensional Variable-Coefficient Caudrey-Dodd-Gibbon-Kotera-Sawada Equation (Articles)

Yang Zhou

Open Journal of Applied Sciences Vol.10 No.3, March 6, 2020

DOI: 10.4236/ojapps.2020.103005 752 Downloads 1,804 Views Citations
Tranexamic Acid and Ethamsylate for Reducing Blood Loss in Patient Undergoing Lower Segment Cesarean Section at High Risk for Post-Partum Hemorrhage: A Pilot Study (Articles)

Ahmed Alanwar, Sherif Akl, Sherif El-Mekawi, Marwan M. Gamal

Open Journal of Obstetrics and Gynecology Vol.10 No.9, September 24, 2020

DOI: 10.4236/ojog.2020.1090123 1,551 Downloads 9,617 Views Citations
Knowledge Management: Human Intellectual Capital (HIC) Measurement by Item Response Theory (IRT) (Articles)

Álvaro António Pinheiro Barroqueiro, Célia Maria da Silva Fernandes, Sílvio Manuel da Rocha Brito

Open Journal of Social Sciences Vol.12 No.4, April 25, 2024

DOI: 10.4236/jss.2024.124022 142 Downloads 772 Views Citations
Electrospun Gelatin Constructs with Tunable Fiber Orientation Promote Directed Angiogenesis (Articles)

Ramon B. Montero, Roberto I. Vazquez-Padron, Si M. Pham, Gianluca D’Ippolito, Fotios M. Andreopoulos

Open Journal of Regenerative Medicine Vol.3 No.1, March 3, 2014

DOI: 10.4236/ojrm.2014.31001 5,222 Downloads 7,694 Views Citations
Studies on Capacity Expansion of Fuel Plants for Nuclear Research Reactors (Articles)

Miguel Luiz Miotto Negro, Michelangelo Durazzo, Marco Aurélio de Mesquita, Elita Fontenele Urano de Carvalho, Roberto Navarro de Mesquita, Delvonei Alves de Andrade

World Journal of Nuclear Science and Technology Vol.8 No.2, April 9, 2018

DOI: 10.4236/wjnst.2018.82005 1,299 Downloads 2,575 Views Citations
Simulation and Experimental Analysis of Vortex Tube Using Steel Material (Articles)

Muhammad Bilal, Yaolong Chen, Jun Zha, Naveed Ullah

Open Journal of Fluid Dynamics Vol.10 No.3, July 1, 2020

DOI: 10.4236/ojfd.2020.103010 1,014 Downloads 4,226 Views Citations
Recipe Development and Mechanical Characterization of Carbon Fibre Reinforced Recycled Polypropylene 3D Printing Filament (Articles)

Mwambe Polline, James M. Mutua, Thomas Ochuku Mbuya, Kyekyere Ernest

Open Journal of Composite Materials Vol.11 No.3, July 30, 2021

DOI: 10.4236/ojcm.2021.113005 737 Downloads 2,840 Views Citations

First <123 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies