CNC Turning - Articles - Scientific Research Publishing

Analysis and Prediction of Effect of Turning Marks Diffraction on Image Quality of Optical System (Articles)

Haokun Ye, Jianping Zhang, Shuanglong Tan, Shangnan Zhao, Mingxin Liu, Xin Zhang

Optics and Photonics Journal Vol.13 No.6, June 30, 2023

DOI: 10.4236/opj.2023.136008 246 Downloads 933 Views Citations
Assessing Joint Simulation and Estimation Approaches in Geometallurgical Modeling (Articles)

Farzaneh Khorram, Gabriel Pais, Manuel Reyes

Journal of Geoscience and Environment Protection Vol.13 No.1, January 26, 2025

DOI: 10.4236/gep.2025.131017 80 Downloads 506 Views Citations
Simultaneous Optimization of Correlated Multiple Surface Quality Characteristics of Mild Steel Turned Product (Articles)

Saurav DATTA, Siba Sankar MAHAPATRA

Intelligent Information Management Vol.2 No.1, January 27, 2010

DOI: 10.4236/iim.2010.21004 6,634 Downloads 12,099 Views Citations
Machinability Study of Titanium (Grade-5) Alloy Using Design of Experiment Technique (Articles)

Kali Dass, S. R Chauhan

Engineering Vol.3 No.6, June 23, 2011

DOI: 10.4236/eng.2011.36073 6,938 Downloads 13,377 Views Citations
Modeling and Simulation of Laser Assisted Turning of Hard Steels (Articles)

Omar Abdulghani, Mohamed Sobih, Amro Youssef, Abdel-Monem El-Batahgy

Modeling and Numerical Simulation of Material Science Vol.3 No.4, October 10, 2013

DOI: 10.4236/mnsms.2013.34014 5,879 Downloads 9,753 Views Citations
Development and Testing of an Automatic Turning Movement Identification System at Signalized Intersections (Articles)

Kun Xu, Ping Yi, Chun Shao, Jialei Mao

Journal of Transportation Technologies Vol.3 No.4, October 11, 2013

DOI: 10.4236/jtts.2013.34025 3,781 Downloads 6,752 Views Citations
Test and Evaluation of Stiffness of a Pin Turning Device for Large Marine Engine Crankshafts (Articles)

Y. H. Choi, G. B. Ha, D. H. Kim, H. S. An

Journal of Power and Energy Engineering Vol.1 No.7, November 28, 2013

DOI: 10.4236/jpee.2013.17003 4,029 Downloads 6,228 Views Citations
The Effect of Tool Construction and Cutting Parameters on Surface Roughness and Vibration in Turning of AISI 1045 Steel Using Taguchi Method (Articles)

Rogov Vladimir Aleksandrovich, Ghorbani Siamak

Modern Mechanical Engineering Vol.4 No.1, February 20, 2014

DOI: 10.4236/mme.2014.41002 8,566 Downloads 14,094 Views Citations
Forest Transition and Changes in the Socio-Economic Structure of a Developed Country: A Long-Term Analysis (Articles)

Valerio Moretti, Agostino Ferrara, Andrea Colantoni, Margherita Carlucci, Luca Salvati

Modern Economy Vol.5 No.9, August 5, 2014

DOI: 10.4236/me.2014.59086 3,702 Downloads 5,031 Views Citations
Process Capability Analysis of a Centre Lathe Turning Process (Articles)

Andrew A. Erameh, Nurudeen A. Raji, Rasheed O. Durojaye, Abiodun A. Yussouff

Engineering Vol.8 No.3, March 15, 2016

DOI: 10.4236/eng.2016.83010 5,383 Downloads 10,519 Views Citations
Female Headship and Life History Research: Using Emotional Turning Points (Articles)

Joanne Cliffe

Creative Education Vol.7 No.18, December 15, 2016

DOI: 10.4236/ce.2016.718258 1,733 Downloads 3,599 Views Citations
This article belongs to the Special Issue on Emotional Intelligence Education
Grey Relational Optimization of Turning Parameters in Dry Machining of Austenitic Stainless Steel Using Zr Based Coated Tools (Articles)

Kaushik Vijaya Prasad, Kishore Triambak Kashyap, Madapat Job Richard, Posina Gerard Prabhu Rao, Abhishek Rajole, Rabara Hiren

Open Journal of Applied Sciences Vol.7 No.7, July 14, 2017

DOI: 10.4236/ojapps.2017.77027 1,290 Downloads 2,676 Views Citations
Simple Singular Perturbation Problems with Turning Points (Articles)

Na Wang

Journal of Applied Mathematics and Physics Vol.7 No.12, December 9, 2019

DOI: 10.4236/jamp.2019.712208 868 Downloads 2,682 Views Citations
Influence of Machining Parameter on Tool Life While Machining Hybrid Metal Matrix Composites (Articles)

C. R. Prakash Rao, V. Ravi Kumar, D. V. Ravi Kumar, Poorna Chandra, M. Vedavyasa, M. S. Rajagopal

Journal of Minerals and Materials Characterization and Engineering Vol.8 No.6, November 6, 2020

DOI: 10.4236/jmmce.2020.86028 859 Downloads 2,415 Views Citations
Influence of Machining Parameter on Surface Roughness and Tool Life While Machining EN24 Grade Alloy Steel (Articles)

Chand R. Prem, T. V. Sreerama Reddy

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.3, May 26, 2022

DOI: 10.4236/jmmce.2022.103019 373 Downloads 1,729 Views Citations
Development and Evaluation of Intersection-Based Turning Movement Counts Framework Using Two Channel LiDAR Sensors (Articles)

Ravi Jagirdar, Joyoung Lee, Dejan Besenski, Min-Wook Kang, Chaitanya Pathak

Journal of Transportation Technologies Vol.13 No.4, September 1, 2023

DOI: 10.4236/jtts.2023.134024 322 Downloads 1,400 Views Citations
The Realization of Lewis Turning Point Is Seen from the Labor Production Efficiency of Urban and Rural Sectors
—A Statistical Study Based on Data (Articles)

Jianfeng Jiao

Modern Economy Vol.15 No.10, October 22, 2024

DOI: 10.4236/me.2024.1510048 121 Downloads 751 Views Citations
Bioethics Education in Africa: Still Complex Challenges (Articles)

Cletus T. Andoh

Open Journal of Philosophy Vol.3 No.4, November 21, 2013

DOI: 10.4236/ojpp.2013.34073 4,477 Downloads 6,995 Views Citations
One-Dimensional Filamentary Multiparticle Quantum Structures Arising in the Plane Transverse to External Homogeneous Magnetic Field (Articles)

Vladimir V. Lugovoi

Journal of Modern Physics Vol.6 No.7, June 30, 2015

DOI: 10.4236/jmp.2015.67103 3,081 Downloads 4,012 Views Citations
On a Non-Definite Sturm-Liouville Problem in the Two-Turning Point Case—Analysis and Numerical Results (Articles)

Mervis Kikonko

Journal of Applied Mathematics and Physics Vol.4 No.9, September 28, 2016

DOI: 10.4236/jamp.2016.49184 1,492 Downloads 3,412 Views Citations

First <123 >Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies