Steel Slag - Articles - Scientific Research Publishing

Role of Metallurgy in the Localized Corrosion of Carbon Steel (Articles)

Recep Avci, Bret H. Davis, Nathaniel Rieders, Kilean Lucas, Manjula Nandasiri, Dave Mogk

Journal of Minerals and Materials Characterization and Engineering Vol.6 No.6, November 23, 2018

DOI: 10.4236/jmmce.2018.66044 1,836 Downloads 4,738 Views Citations
Experimental Investigation of Laser Welding Process in Overlap Joint Configuration (Articles)

Kamel Oussaid, Abderrazak El Ouafi, Ahmed Chebak

Journal of Materials Science and Chemical Engineering Vol.7 No.3, March 27, 2019

DOI: 10.4236/msce.2019.73002 1,432 Downloads 3,802 Views Citations
Experimental Investigation on the Properties of Recycled Concrete Using Hybrid Fibers (Articles)

Salim Khoso, Janet Raad, Azadeh Parvin

Open Journal of Composite Materials Vol.9 No.2, April 16, 2019

DOI: 10.4236/ojcm.2019.92009 1,554 Downloads 3,760 Views Citations
Corrosion Behavior of Reinforcement Steel Embedded in Cement Mortars Using Different Protection Systems (Articles)

Evgenia Voulgari, Aggeliki Zacharopoulou, Nikolaos Chousidis, George Batis

Materials Sciences and Applications Vol.10 No.6, June 20, 2019

DOI: 10.4236/msa.2019.106034 1,074 Downloads 2,937 Views Citations
This article belongs to the Special Issue on Reinforcement, Cement and Concrete
Investigation of the Relation between Rolling Contact Fatigue Property and Microstructure on the Surface Layer of D2 Wheel Steel (Articles)

Shuaishuai Wang, Xiujuan Zhao, Pengtao Liu, Jinzhi Pan, Chunhuan Chen, Ruiming Ren

Materials Sciences and Applications Vol.10 No.8, August 8, 2019

DOI: 10.4236/msa.2019.108037 1,249 Downloads 3,050 Views Citations
This article belongs to the Special Issue on Fatigue and Fracture of Engineering Materials and Structures
Mechanical Properties for Circumferential Welding Applied to UNS S32750 Super Duplex Stainless Steel Using the GMAW Process with CMT Control (Articles)

Bruno Pizol Invernizzi, Leandro Gusmão Silva, Maurício David Martins das Neves

Engineering Vol.11 No.9, September 17, 2019

DOI: 10.4236/eng.2019.119040 1,120 Downloads 3,063 Views Citations
Effect of Pipe Diameter on Electrochemical Behavior of Stainless Steel Type 304 Pipes in Tap Water (Articles)

Noriyuki Tanaka, Shigeru Sato, Itaru Ikeda, Tadahiko Uchida, Motoki Kuratani, Yutaka Yamada, Osamu Sakurada

Materials Sciences and Applications Vol.10 No.11, November 18, 2019

DOI: 10.4236/msa.2019.1011050 593 Downloads 1,819 Views Citations
This article belongs to the Special Issue on Material Corrosion and Protection
A Study on Prediction of Weld Geometry in Laser Overlap Welding of Low Carbon Galvanized Steel Using ANN-Based Models (Articles)

Kamel Oussaid, Abderazak El Ouafi

Journal of Software Engineering and Applications Vol.12 No.12, December 23, 2019

DOI: 10.4236/jsea.2019.1212031 917 Downloads 2,305 Views Citations
Simulation and Experimental Analysis of Vortex Tube Using Steel Material (Articles)

Muhammad Bilal, Yaolong Chen, Jun Zha, Naveed Ullah

Open Journal of Fluid Dynamics Vol.10 No.3, July 1, 2020

DOI: 10.4236/ojfd.2020.103010 979 Downloads 4,138 Views Citations
Lance Design for Argon Bubbling in Molten Steel (Articles)

Servando De la Cruz, Miguel A. Barron, Dulce Y. Medina, Joan Reyes

World Journal of Engineering and Technology Vol.8 No.3, July 24, 2020

DOI: 10.4236/wjet.2020.83025 803 Downloads 3,405 Views Citations
Simulation and Techno-Economic Performance of a Novel Charge Calculation and Melt Optimization Planning Model for Steel Making (Articles)

Onigbajumo Adetunji, Saliu Ojo Seidu

Journal of Minerals and Materials Characterization and Engineering Vol.8 No.4, July 30, 2020

DOI: 10.4236/jmmce.2020.84017 975 Downloads 2,979 Views Citations
1-Hydroxyethylidene-1,1-diphosphonic Acid (HEDP) as a Corrosion Inhibitor of AISI 304 Stainless Steel in a Medium Containing Chloride and Sulfide Ions in the Presence of Different Metallic Cations (Articles)

Juliana Panceri Franco, Josimar Ribeiro

Advances in Chemical Engineering and Science Vol.10 No.3, July 31, 2020

DOI: 10.4236/aces.2020.103017 824 Downloads 4,148 Views Citations
Re-Assembly of Archaeological Massive Limestones Using Epoxy Resin Modified with Nanomaterials—Part 2: Applied (Articles)

Mohammad A. Aldoasri, Sawsan S. Darwish, Mahmoud A. Adam, Nagib A. Elmarzugi, Sayed M. Ahmed

Green and Sustainable Chemistry Vol.10 No.3, August 28, 2020

DOI: 10.4236/gsc.2020.103006 520 Downloads 1,507 Views Citations
Bubbling to Jetting Transition during Argon Injection in Molten Steel (Articles)

Miguel A. Barron, Joan Reyes, Dulce Y. Medina

World Journal of Engineering and Technology Vol.8 No.4, October 14, 2020

DOI: 10.4236/wjet.2020.84042 628 Downloads 1,925 Views Citations
Bi-Modal Failure Mechanism of Rolling Contact Bearings (Articles)

Y. Meged

Advances in Materials Physics and Chemistry Vol.10 No.10, October 27, 2020

DOI: 10.4236/ampc.2020.1010017 490 Downloads 1,393 Views Citations
Sulfide Stress Cracking Assessment of Carbon Steel Welding with High Content of H₂S and CO₂ at High Temperature: A Case Study (Articles)

Apolinar Albiter

Engineering Vol.12 No.12, December 11, 2020

DOI: 10.4236/eng.2020.1212061 913 Downloads 4,010 Views Citations
Investigation of Hot Deformation Behavior of SNCM8 Alloy Steel (Articles)

Naiyanut Jantepa, Surasak Suranuntchai

World Journal of Mechanics Vol.11 No.3, March 26, 2021

DOI: 10.4236/wjm.2021.113003 614 Downloads 1,849 Views Citations
The Impacts of Industry 4.0 on Marketing Activities and Strategies of Iron and Steel Industry in Developing Countries: Case for Uganda (Articles)

Alfred Ocheng Komakech, Jiaguo Liu, Alfred Omo, Emmanuel Afanga Archelaus Basua

Open Journal of Social Sciences Vol.9 No.5, May 26, 2021

DOI: 10.4236/jss.2021.95034 980 Downloads 8,468 Views Citations
Weld Metal Dendritic Structure Modification by Dispersed Refractory Oxide Particles (Articles)

Viktor Volodymyrovych Holovko, Sergiy Mikolayovich Stepanyuk, Dmytro Yuriiovych Yermolenko

Open Access Library Journal Vol.8 No.7, July 19, 2021

DOI: 10.4236/oalib.1107429 179 Downloads 1,630 Views Citations
Analysing the Microstructures and Pin-on-Disc Wear Properties of 1010 Steel-Based and B₄C-Added Materials Produced through Powder Metallurgy (Articles)

Mehtap Demirel, Vahdettin Koç

World Journal of Engineering and Technology Vol.9 No.3, August 31, 2021

DOI: 10.4236/wjet.2021.93047 397 Downloads 1,647 Views Citations

First <...171819 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies