Eutectoid Steel; Drawability; Annealing; Cupping; Anistropism - Articles

An Inventory of Fluorspar Production, Industrial Use, and Emissions of Trifluoroacetic Acid (TFA) in the Period 1930 to 1999 (Articles)

Andrew A. Lindley

Journal of Geoscience and Environment Protection Vol.11 No.3, March 13, 2023

DOI: 10.4236/gep.2023.113001 536 Downloads 2,581 Views Citations
A Fuzzy Logic Approach to Predict Tensile Strength in TIG Mild Steel Welds (Articles)

Ademola Adebiyi Oyinbade, Kehinde Ademola Imoukhuede, Abdulateef Olufolahan Akadiri

World Journal of Engineering and Technology Vol.11 No.2, March 16, 2023

DOI: 10.4236/wjet.2023.112013 203 Downloads 898 Views Citations
A Review of Influencing Factors of Damping Properties of High Manganese Steel (Articles)

Chao Chen, Jiale Wang, Jianyu Jiao, Fengmei Bai, Guangwen Zheng

Journal of Materials Science and Chemical Engineering Vol.11 No.3, March 31, 2023

DOI: 10.4236/msce.2023.113005 315 Downloads 1,328 Views Citations
A Biaxial Bending Study of H-Section Steel Member at the Ultimate State (Articles)

Mohamad Mansour

Open Access Library Journal Vol.10 No.5, May 10, 2023

DOI: 10.4236/oalib.1110108 89 Downloads 777 Views Citations
Hydrogen Embrittlement of Nitrogenating Layer on Martensitic Alloys (Articles)

Daniel Moreno, Yohanan Nachmana, Shimon Bashan, Barak Weizman, Denis Panchenko, Michael Mansano, Elinor Itzhak, Moshe Shapira

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.5, September 8, 2023

DOI: 10.4236/jmmce.2023.115013 323 Downloads 1,529 Views Citations
Simulation of the Behaviour Laws in the Thermal Affected Zones of the 13Cr-4Ni Martensitic Stainless Steel (Articles)

Marcel Julmard Ongoumaka Yandza, Harmel Obami-Ondon, Christian Tathy

Modern Mechanical Engineering Vol.13 No.4, September 18, 2023

DOI: 10.4236/mme.2023.134005 274 Downloads 958 Views Citations
The Use of Models to Evaluate Corrosion Effects on Mild Steel Heat Exchanger in Water and Mono Ethanol Amine (MEA) (Articles)

Ojong Elias Ojong, Jaja Zina, Wosu Chimene Omeke, Ana Anakri Ekpenyong, Dadet Wilson, Anaba Catherine Uloma, Emenike Aguma, Sedi Patrick, Forwah Jacques Ndeh

Advances in Chemical Engineering and Science Vol.13 No.4, October 18, 2023

DOI: 10.4236/aces.2023.134023 250 Downloads 1,018 Views Citations
Assessment of Deviation in Quality of Steel Reinforcing Bars Used in Some Building Sites in Cameroon (Articles)

Patrick Che Bame, Bell Emmanuel Yamb, Billong Ndigui

World Journal of Engineering and Technology Vol.11 No.4, November 29, 2023

DOI: 10.4236/wjet.2023.114061 219 Downloads 1,382 Views Citations
Numerical Optimization by Finite Element Method of Stainless Steel/Glass-Epoxy Composite Bolted Joint under Tension and Compression (Articles)

Christian Schmitt, Arnaud Kremeur, Pawel Lipinski, Julien Capelle

Engineering Vol.16 No.4, April 30, 2024

DOI: 10.4236/eng.2024.164009 145 Downloads 1,059 Views Citations
Stainless Steel Failures: Bridging Metallurgy and Practice—Lessons from Case Studies and Industrial Material Selection (Articles)

Kok Toong Leong

World Journal of Engineering and Technology Vol.14 No.1, January 29, 2026

DOI: 10.4236/wjet.2026.141011 118 Downloads 777 Views Citations
Time-Varying Effects and Risk Spillover of EPU and TPU on Steel Prices: A TVP-VAR-DY Analysis (Articles)

Han Wu

Open Journal of Applied Sciences Vol.16 No.4, April 22, 2026

DOI: 10.4236/ojapps.2026.164069 21 Downloads 161 Views Citations
A Study on the Structural Response of a PSC Inner Containment Dome with Large Openings Due to Prestress Transfer (Articles)

Anirudh A. Desai, Sekhar K. Chakrabarti

World Journal of Nuclear Science and Technology Vol.4 No.2, April 29, 2014

DOI: 10.4236/wjnst.2014.42016 4,459 Downloads 6,187 Views Citations
2D Investigation of Bonding Forces of Straight Steel Fiber in Concrete (Articles)

Amjad Khabaz

Open Access Library Journal Vol.2 No.10, October 23, 2015

DOI: 10.4236/oalib.1101991 1,137 Downloads 2,495 Views Citations
Development of Tailored Structure and Tensile Properties of Thermomechanical Treated Micro Alloyed Low Carbon Dual Phase Steel (Articles)

Hany Khalifa, G. M. Megahed, Taher El-Bitar, Mohamed A. Taha

Materials Sciences and Applications Vol.11 No.12, December 22, 2020

DOI: 10.4236/msa.2020.1112056 47,159 Downloads 49,138 Views Citations
Effect of Annealing on the Structural and Optical Properties of CuIn_1–xAl_xS₂ thin Films (Articles)

Fethi Smaili

Materials Sciences and Applications Vol.2 No.9, September 20, 2011

DOI: 10.4236/msa.2011.29164 4,470 Downloads 8,692 Views Citations
Encapsulating the Role of Solution Response Space Roughness on Global Optimal Solution: Application in Identification of Unknown Groundwater Pollution Sources (Articles)

Om Prakash, Bithin Datta

Open Journal of Optimization Vol.3 No.3, September 18, 2014

DOI: 10.4236/ojop.2014.33004 4,417 Downloads 5,593 Views Citations
The Influence of Different Type Irradiations on the Surface States Parameters of Si-SiO₂ Structures (Articles)

Aram A. Sahakyan, Hrant N. Yeritsyan, Vachagan V. Harutunyan, Hamlet S. Karayan, Vahan A. Sahakyan

Journal of Modern Physics Vol.6 No.11, September 24, 2015

DOI: 10.4236/jmp.2015.611167 2,801 Downloads 3,544 Views Citations
This article belongs to the Special Issue on Electron Correlation Effects
Linking a Simulated Annealing Based Optimization Model with PHT3D Simulation Model for Chemically Reactive Transport Processes to Optimally Characterize Unknown Contaminant Sources in a Former Mine Site in Australia (Articles)

Bithin Datta, Claire Petit, Marine Palliser, Hamed K. Esfahani, Om Prakash

Journal of Water Resource and Protection Vol.9 No.5, April 20, 2017

DOI: 10.4236/jwarp.2017.95028 1,702 Downloads 3,310 Views Citations
Bertalanffy-Pütter Models for the Growth of Tropical Trees and Stands (Articles)

Norbert Brunner, Manfred Kühleitner

Open Journal of Modelling and Simulation Vol.8 No.4, September 7, 2020

DOI: 10.4236/ojmsi.2020.84006 627 Downloads 2,164 Views Citations
A Predictive Modeling Based on Regression and Artificial Neural Network Analysis of Laser Transformation Hardening for Cylindrical Steel Workpieces (Articles)

Ahmed Ghazi Jerniti, Abderazzak El Ouafi, Noureddine Barka

Journal of Surface Engineered Materials and Advanced Technology Vol.6 No.4, October 12, 2016

DOI: 10.4236/jsemat.2016.64014 1,749 Downloads 3,112 Views Citations

First <...151617 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies