Genetic Algorithms; Mutli-Objective Optimization; Turning Process; Machining - Articles

Modeling and Simulation of Laser Assisted Turning of Hard Steels (Articles)

Omar Abdulghani, Mohamed Sobih, Amro Youssef, Abdel-Monem El-Batahgy

Modeling and Numerical Simulation of Material Science Vol.3 No.4, October 10, 2013

DOI: 10.4236/mnsms.2013.34014 5,877 Downloads 9,748 Views Citations
Development and Testing of an Automatic Turning Movement Identification System at Signalized Intersections (Articles)

Kun Xu, Ping Yi, Chun Shao, Jialei Mao

Journal of Transportation Technologies Vol.3 No.4, October 11, 2013

DOI: 10.4236/jtts.2013.34025 3,779 Downloads 6,746 Views Citations
Test and Evaluation of Stiffness of a Pin Turning Device for Large Marine Engine Crankshafts (Articles)

Y. H. Choi, G. B. Ha, D. H. Kim, H. S. An

Journal of Power and Energy Engineering Vol.1 No.7, November 28, 2013

DOI: 10.4236/jpee.2013.17003 4,027 Downloads 6,221 Views Citations
The Effect of Tool Construction and Cutting Parameters on Surface Roughness and Vibration in Turning of AISI 1045 Steel Using Taguchi Method (Articles)

Rogov Vladimir Aleksandrovich, Ghorbani Siamak

Modern Mechanical Engineering Vol.4 No.1, February 20, 2014

DOI: 10.4236/mme.2014.41002 8,565 Downloads 14,088 Views Citations
Forest Transition and Changes in the Socio-Economic Structure of a Developed Country: A Long-Term Analysis (Articles)

Valerio Moretti, Agostino Ferrara, Andrea Colantoni, Margherita Carlucci, Luca Salvati

Modern Economy Vol.5 No.9, August 5, 2014

DOI: 10.4236/me.2014.59086 3,699 Downloads 5,022 Views Citations
Female Headship and Life History Research: Using Emotional Turning Points (Articles)

Joanne Cliffe

Creative Education Vol.7 No.18, December 15, 2016

DOI: 10.4236/ce.2016.718258 1,732 Downloads 3,592 Views Citations
This article belongs to the Special Issue on Emotional Intelligence Education
Simple Singular Perturbation Problems with Turning Points (Articles)

Na Wang

Journal of Applied Mathematics and Physics Vol.7 No.12, December 9, 2019

DOI: 10.4236/jamp.2019.712208 865 Downloads 2,674 Views Citations
Influence of Machining Parameter on Tool Life While Machining Hybrid Metal Matrix Composites (Articles)

C. R. Prakash Rao, V. Ravi Kumar, D. V. Ravi Kumar, Poorna Chandra, M. Vedavyasa, M. S. Rajagopal

Journal of Minerals and Materials Characterization and Engineering Vol.8 No.6, November 6, 2020

DOI: 10.4236/jmmce.2020.86028 859 Downloads 2,409 Views Citations
Influence of Machining Parameter on Surface Roughness and Tool Life While Machining EN24 Grade Alloy Steel (Articles)

Chand R. Prem, T. V. Sreerama Reddy

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.3, May 26, 2022

DOI: 10.4236/jmmce.2022.103019 373 Downloads 1,728 Views Citations
Development and Evaluation of Intersection-Based Turning Movement Counts Framework Using Two Channel LiDAR Sensors (Articles)

Ravi Jagirdar, Joyoung Lee, Dejan Besenski, Min-Wook Kang, Chaitanya Pathak

Journal of Transportation Technologies Vol.13 No.4, September 1, 2023

DOI: 10.4236/jtts.2023.134024 320 Downloads 1,394 Views Citations
The Realization of Lewis Turning Point Is Seen from the Labor Production Efficiency of Urban and Rural Sectors
—A Statistical Study Based on Data (Articles)

Jianfeng Jiao

Modern Economy Vol.15 No.10, October 22, 2024

DOI: 10.4236/me.2024.1510048 121 Downloads 739 Views Citations
A Novel Half-Bridge Power Supply for High Speed Drilling Electrical Discharge Machining (Articles)

He Huang, Jicheng Bai, Zesheng Lu, Yongfeng Guo

Journal of Electromagnetic Analysis and Applications Vol.1 No.2, June 25, 2009

DOI: 10.4236/jemaa.2009.12017 10,965 Downloads 19,808 Views Citations
Development of a Simulation-Based Intelligent Decision Support System for the Adaptive Real-Time Control of Flexible Manufacturing Systems (Articles)

Babak Shirazi, Iraj Mahdavi, Maghsud Solimanpur

Journal of Software Engineering and Applications Vol.3 No.7, July 23, 2010

DOI: 10.4236/jsea.2010.37076 6,411 Downloads 12,373 Views Citations
Influence of Coolant in Machinability of Titanium Alloy (Ti-6Al-4V) (Articles)

Muthukrishnan Namb, Davim Paulo

Journal of Surface Engineered Materials and Advanced Technology Vol.1 No.1, March 17, 2011

DOI: 10.4236/jsemat.2011.11002 11,252 Downloads 23,756 Views Citations
Modeling and Optimization of Electrical Discharge Machining of SiC Parameters, Using Neural Network and Non-Dominating Sorting Genetic Algorithm (NSGA II) (Articles)

Ramezan Ali MahdaviNejad

Materials Sciences and Applications Vol.2 No.6, June 24, 2011

DOI: 10.4236/msa.2011.26092 6,853 Downloads 13,935 Views Citations
EDM Studies on Aluminum Alloy-Silicon Carbide Composites Developed by Vortex Technique and Pressure Die Casting (Articles)

M. Kathiresan, T. Sornakumar

Journal of Minerals and Materials Characterization and Engineering Vol.9 No.1, January 20, 2010

DOI: 10.4236/jmmce.2010.91007 9,442 Downloads 16,596 Views Citations
Analysis of the Machining Characteristics on Surface Roughness of a Hybrid Aluminium Metal Matrix Composite (Al6061-SiC-Al₂O₃) (Articles)

T. Sasimurugan, K. Palanikumar

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.13, November 1, 2011

DOI: 10.4236/jmmce.2011.1013094 7,079 Downloads 10,825 Views Citations
Effect of Electrode Materials on Electric Discharge Machining of 316 L and 17 - 4 PH Stainless Steels (Articles)

Subramanian Gopalakannan, Thiagarajan Senthilvelan

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.7, July 25, 2012

DOI: 10.4236/jmmce.2012.117053 9,384 Downloads 13,952 Views Citations
Performance Improvement of the LM Device and Its Application to Precise Measurement of Motion Trajectories within a Small Range with a Machining Centre (Articles)

Hua Qiu, Yong Yue, Akio Kubo, Chao Lin, Kai Cheng, Dehong Huo, Dayou Li

Modern Mechanical Engineering Vol.2 No.3, August 31, 2012

DOI: 10.4236/mme.2012.23010 4,548 Downloads 8,175 Views Citations
Optimization of ECM Process Parameters Using NSGA-II (Articles)

Chinnamuthu Senthilkumar, Gowrishankar Ganesan, Ramanujam Karthikeyan

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.10, October 31, 2012

DOI: 10.4236/jmmce.2012.1110091 7,532 Downloads 9,983 Views Citations

First <...131415 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies