Post-Production Residual Stress History - Articles

A Case Study of the Susceptibility of Zircaloy-4 Sheathing to Iodine Stress-Corrosion Cracking as a Function of Their Metallurgical History in Fabrication (Articles)

Mohsen Farahani, Paul K. Chan, Jennifer L. Snelgrove, Diane Wowk

World Journal of Nuclear Science and Technology Vol.15 No.3, July 25, 2025

DOI: 10.4236/wjnst.2025.153009 114 Downloads 696 Views Citations
Comparative Residual Stress Analysis in Welded Joints Using Both Experimental and Numerical Techniques (Articles)

Rajshekhar B. Aloor, Ramakrishna H V, Nagabhushana Musalammagri

Journal of Minerals and Materials Characterization and Engineering Vol.7 No.4, June 20, 2019

DOI: 10.4236/jmmce.2019.74011 1,152 Downloads 2,667 Views Citations
An Overview of Techniques for Measuring Residual Stress in Metal Matrix Composites (Articles)

Qingping Wang, Pakeeza Maryum, Yuxin Liu

Journal of Materials Science and Chemical Engineering Vol.10 No.10, October 31, 2022

DOI: 10.4236/msce.2022.1010005 447 Downloads 2,611 Views Citations
Estimation of the Yield Stress of Stainless Steel from the Vickers Hardness Taking Account of the Residual Stress (Articles)

Osamu Takakuwa, Yusuke Kawaragi, Hitoshi Soyama

Journal of Surface Engineered Materials and Advanced Technology Vol.3 No.4, October 8, 2013

DOI: 10.4236/jsemat.2013.34035 10,896 Downloads 16,474 Views Citations
All’s Not Quiet on the Western Front? The Stigma against Mental Health Treatment for World Leaders (Articles)

David A. Nissan, Lauretta A. Ziajko, Amanda C. Ries, Landon L. Van Dell

Creative Education Vol.14 No.6, June 14, 2023

DOI: 10.4236/ce.2023.146074 227 Downloads 1,276 Views Citations
Evaluation of Stress Corrosion Cracking Damage to an API 5L X52 Pipeline Transporting Ammonia: A Case Study (Articles)

José Luis Mora-Mendoza, Mónica Jazmín Hernández-Gayosso, Daniel Antonio Morales-Serrat, Octaviano Roque-Oms, Digna Alejandra Del Angel, Gerardo Zavala-Olivares

Materials Sciences and Applications Vol.7 No.10, October 12, 2016

DOI: 10.4236/msa.2016.710050 2,496 Downloads 6,481 Views Citations
This article belongs to the Special Issue on Material Corrosion and Protection Research
Numerical Analysis of Stresses on Layer-by-Layer Basis in FML Composite Cylinder Subjected to External Hydrostatic Loading (Articles)

B. G. Sumana, H. N. Vidya Sagar, K. V. Sharma, M. Krishna

Materials Sciences and Applications Vol.6 No.6, June 4, 2015

DOI: 10.4236/msa.2015.66052 5,417 Downloads 6,751 Views Citations
Analysis of Stress Strain State of X-60 Pipe Weld Joints Employing Magnetic-Anisotropy Indicator of Mechanical Stress (Articles)

Hamid Suliman Hamid Elhag, Nikulin Vasili, Isaac Einav, Yagoub Kamal Eldin

Engineering Vol.8 No.7, July 29, 2016

DOI: 10.4236/eng.2016.87046 2,205 Downloads 3,616 Views Citations
Glass Thickness and Fragmentation Behavior in Stressed Glasses (Articles)

Hoikwan Lee, Seoyeong Cho, Kyungmin Yoon, Jaeho Lee

New Journal of Glass and Ceramics Vol.2 No.4, October 30, 2012

DOI: 10.4236/njgc.2012.24020 10,501 Downloads 18,827 Views Citations
Optimizing the Conditions for Residual Stress Measurement Using a Two-Dimensional XRD Method with Specimen Oscillation (Articles)

Osamu Takakuwa, Hitoshi Soyama

Advances in Materials Physics and Chemistry Vol.3 No.1A, April 26, 2013

DOI: 10.4236/ampc.2013.31A002 6,849 Downloads 11,629 Views Citations
This article belongs to the Special Issue on X-Ray Diffraction
Mechanical Analysis of Viscous-Elastic Fluid Acting on Residual Oil in the Micro Pore (Articles)

Lili Liu, Chao Yu, Lihui Wang, Chengchuyue Fu, Peixiang Li

Open Journal of Fluid Dynamics Vol.3 No.4, December 4, 2013

DOI: 10.4236/ojfd.2013.34030 3,965 Downloads 6,219 Views Citations
Finite Element Method Investigation of the Effect of Cold Expansion Process on Fatigue Crack Growth in 6082 Aluminum Alloy (Articles)

Abdelkrim Aid, Zahar Semari, Mohamed Benguediab

Modeling and Numerical Simulation of Material Science Vol.4 No.1, January 13, 2014

DOI: 10.4236/mnsms.2014.41005 6,051 Downloads 9,624 Views Citations
The Use of Cavitation Peening to Increase the Fatigue Strength of Duralumin Plates Containing Fastener Holes (Articles)

Hitoshi Soyama

Materials Sciences and Applications Vol.5 No.6, May 28, 2014

DOI: 10.4236/msa.2014.56047 5,570 Downloads 8,381 Views Citations
This article belongs to the Special Issue on Materials Applied in Aviation and Spaceflight
High Effective FE Simulation Methods for Deformation and Residual Stress by Butt Welding of Thin Steel Plates (Articles)

Mikihito Hirohata, Yoshito Itoh

Engineering Vol.6 No.9, August 5, 2014

DOI: 10.4236/eng.2014.69053 3,708 Downloads 4,973 Views Citations
This article belongs to the Special Issue on Welding Technology
The Abrasive Wear of Non-Oxide Structural Ceramics in Wet Environment (Articles)

Z. Pędzich, G. Grabowski, I. Saferna, M. Ziąbka, A. Gubernat, J. Szczerba, M. M. Bućko, M. Kot

Journal of Materials Science and Chemical Engineering Vol.2 No.10, October 28, 2014

DOI: 10.4236/msce.2014.210002 2,884 Downloads 4,125 Views Citations
Effect of Residual Stress on the Corrosion Behavior of Austenitic Stainless Steel (Articles)

Osamu Takakuwa, Hitoshi Soyama

Advances in Chemical Engineering and Science Vol.5 No.1, January 15, 2015

DOI: 10.4236/aces.2015.51007 7,849 Downloads 11,976 Views Citations
Evaluation of the Surface of Nitinol after MR Polishing Process (Articles)

Byung-Chan Kim, Jung-Won Lee, Seok-Jae Ha, Yong-Kyu Cho, Dong-Sung Kang, Myeong-Woo Cho

Journal of Applied Mathematics and Physics Vol.3 No.2, January 30, 2015

DOI: 10.4236/jamp.2015.32031 3,786 Downloads 5,143 Views Citations
Fatigue Limit Prediction and Estimation for the Crack Size Rendered Harmless by Peening for Welded Joint Containing a Surface Crack (Articles)

Ryutaro Fueki, Koji Takahashi, Keiji Houjou

Materials Sciences and Applications Vol.6 No.6, June 5, 2015

DOI: 10.4236/msa.2015.66053 4,054 Downloads 5,605 Views Citations
Using Cavitation Peening to Improve the Fatigue Life of Titanium Alloy Ti-6Al-4V Manufactured by Electron Beam Melting (Articles)

Mitsuru Sato, Osamu Takakuwa, Masaaki Nakai, Mitsuo Niinomi, Fumio Takeo, Hitoshi Soyama

Materials Sciences and Applications Vol.7 No.4, April 20, 2016

DOI: 10.4236/msa.2016.74018 2,904 Downloads 5,342 Views Citations
A Finite Element Model to Investigate the Impact of Torch Angle on an Autogenous TIG Welding Process (Articles)

Richard Turner

World Journal of Engineering and Technology Vol.5 No.4, November 28, 2017

DOI: 10.4236/wjet.2017.54062 1,484 Downloads 3,581 Views Citations

First <12 3 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies