Crops distribution is currently marginalize by climate limits worldwide, either by default or by an excess of the vital needs for the individuals within different biotypes. Right from the moment the planting is performed, the plants are submitted to the climate components asynchronous variations, having those turned into the most determinant factors for the success of any given crop [22] - [27].

The particular needs and requirements of such crops are most commonly described in ranges, being usually reported by species or even genotype. The result of the diagnosis shall rely on the intervals taken into account; as a result, if optimal values are considered, the resultant potential areas may indeed provide a better yield and cultivation profitability.

The following criteria were considered to determine the potential areas for Gmelina to be cultivated under rainfed conditions: Those where all of the appropriate variables interacting with each other were considered as the most suitable for an optimal development; those where the correct climatic and soil characteristics interaction prevailed, despite some restrictions, were considered as suboptimal; finally, those considered as inadequate for the mechanical settlement of Gmelina cultivations were reported, too. Potential areas were determined taking into account only those opened for cultivation. Altitude, soil, temperature and annual rainfall levels were also taken into account in addition to climate, in order to have the optimal, suboptimal and inadequate Gmelina arborea cultivation areas defined (Table 1).

*Types of climates: Af = Equatorial climate; Am = Monsoon climate; Aw = Tropical savanna climate; Cw = Humid subtropical climate; Cf = Warm oceanic climate; Bw = Warm desert climate; Bs = Warm semi-arid climate; Cs = Warm Mediterranean climate. Source: Own elaboration based on consultation of experts and different sources of information.

The Arc/View version 3.3., software—developed by the American company ESRI—, was the program used for data process and analysis. Geo-referenced data can be represented with it, as well as the analysis of characteristics and distribution patterns for such data, looking forward to have it reported, afterwards [28]. All of the Arc/View activity took place within the project parameters, which were a collection of related documents controlled during the Arc/View session.

Projects may contain as many as five different views, tables, charts, layouts (or printouts) and scripts. The names of all of the documents contained in an Arc/View project were displayed through the Project window; then, a project had the status of all of these documents properly organized and stored; next, the project decided how and where such documents were meant displayed, keeping the document selection active and with the appearance of the application window defined, which is the same as making a quick picture of the Arc/View status at the moment of saving it. The project information was further stored in an ASCII format file, always with an *.Apr. Extension. Arc/View, which was mainly a maps vector generator.

The procedure was performed in Arc/View 3.3 (Figure 1) to take the variables intersection process into consideration in order to generate optimal, suboptimal and unsuitable potential areas. The maps were generated through cartographic intersections between polygons and potential classes were described and maintained in each process of intersection in vector processing; as a result, the final map provided information on all of the variables that were intercepted. These maps were more representative raster models as they were more accurate to

generate estimates of a given area, due to the fact that the maps involved in the processes were polygonal. Crop requirements were identified, and those suitable for the cultivation with regards to each variable that were analyzed in the study hereby; then, the performance of the mapping features were selected intersections.

In 2013 there were reported 5251 hectares of commercial plantations of G. arboreain the state of Tabasco, being scattered by municipality as follows: Balancán 3288, Huimanguillo 1050, Tenosique 683 and other municipalities 230 hectares [29]. According to the results, it was determined that under rainfed conditions there are 191,532 ha of high potential for Melina and 542,573 ha of medium potential (Figure 2). The areas with optimal potential are mainly distributed in the municipalities of Balancán, Huimanguillo, Tacotalpa, Teapa, Jalapa, Macuspana, Centro, Nacajuca and Tenosique whilst for the medium-potential areas the outstanding municipalities are: Cárdenas, Comalcalco, Cunduacán, Jalpa de Méndez, Nacajuca, Centro, Balancán and Emiliano Zapata. The optimal and suboptimal areas under rainfed conditions are shown in Figure 3.

The best sites for G. arborea to be established are located in those lands with available water and nutrients [30] due to the fact that the species grows well in deep, humid, well drained, aerated and fertile soils [31] with a slightly acidic, neutral or alkaline pH without salts [32]. It also grows better in valleys and in slightly sloping soils [33] since it is not adapted to medium sloping regions where leaching of nutrients is a common process inducing little growth and chlorotic foliage. It has been mentioned that in the valleys Gmelina presents a

rapid growth and healthy leaves [34]. The most successful plantations in Latin America and Asia have been established in predominantly clayey soils with a depth of at least 60 cm [35] whilst there is a tend to fail in sandy soils.

The Soils. In Tabasco there are optimal soils for G. arborea classified as: Fluvisols, Luvisols, Andosols and Acrisols; as well as suboptimal soils such as Cambisols, Vertisols and Gleysols with slopes greater than 5% (slopes less than 5% are considered unsuitable due to the risk of flooding). The soils considered as unsuitable are the stony ones: Lithosols; the flooded ones, located in the lowlands: Solonchaks, Vertisols, Gleysols, Histosols, Phaeozem and the low water retention and poor fertility soils such as: Arenosols and Regosols (Figure 4).

The Climate. The tropical climates (A) are distinguished because their average annual temperature exceeds 18˚C and their average rainfall fluctuates between 800 mm (in the Aw climate) up to 4000 mm (in the Af climate). The state of Tabasco has three types of climates: Warm humid with abundant rains in summer (Am), Warm humid with abundant rains through the whole year (Af) and Warm subhumid with rains in summer (Aw₂) [36] [37] [38]. The climate in Tabasco is suitable for forest plantations including G. arborea. The municipalities representing the high potential areas are: Huimanguillo, Tacotalpa, Teapa, Jalapa, Macuspana, Centro, Nacajuca and Tenosique with Af and Am climate types (Figure 5).

In general, the climate of Tabasco is hot humid with abundant rains in summer, with a rainfall of 1500 to 2750 mm; the rainy season is from June to March. The average annual temperature is 27˚C, the maximum average temperature is 36˚C and occurs in the month of May, the average minimum temperature is 18.5˚C during the month of January; there are no frosts and as for hurricanes, its

coastline is of medium incidence. The optimum conditions for G. arborea are those where the annual temperature and precipitation are between 18˚C - 35˚C and 1778 - 2286 mm respectively with a clear dry season and a relative humidity not lower than 40% [31]. On the other hand, Stuhrmann et al. (1994) [34] found that, generally, G. arborea needs a dry season for better development, reaching the highest growth rates (more than 6.5 cm per month) in humid warm climates with abundant rains like those presented in Tabasco.

The state of Tabasco is divided into two physiographic provinces: 1) toward the North the province of the coastal plain of the South Gulf 2) toward the South the Province of the Sierra de Chiapas and Guatemala. The latter one comprises more than 30% of the area formed by the municipalities of Tacotalpa, Teapa and Macuspana. These municipalities have been identified in this study as Melina cultivation areas with optimal potential (Figure 6). Also in this province are provided with mountains not higher than 1500 meters above sea level with steepy slopes and inter mountainous valleys that lead to the main rivers of the region. These heights are ideal for Gmelina arborea since it is a wide ecological range species adapted from 50 to 1300 masl [39] [40] ; however, in commercial plantations it grows better from 90 to 1500 masl [41] where the annual temperature and precipitation is 18˚C to 35˚C and 1778 to 2286 mm, respectively, and with a well-defined dry season [31].

Tabasco, in general, has a flat relief with a maximum elevation of 900 meters above sea level; the slopes vary up to a maximum of 5% and as a whole present adequate conditions for G. arborea growing.