Cellulose fiber has become a trend in the development of textile. Pineapple leaf fiber (PALF) is a natural cellulosic fiber collected from pineapple leaves. Every year tones of PALF are being produced but very small portions are being used [1] . The pineapple leaf is currently being wasted in most regions that grow this plant, with only the fruit itself being utilized. In recent decades, pineapple has become a crop of great importance for the north-east of Brazil, with respect to the regional economy [IBGE, 2004]. However, after harvesting, the fruit’s leaves (rich in fiber) are placed for pasture for cattle, or in most cases left to rot. This is due to lack of technology suitable for fiber utilization, as well as growers ignorance of the possible uses of fibers, which can generate them extra income. The fibers derived from pineapple leaves are long, with one of the best fineness indexes among vegetal fibers, which make them suitable for many industrial applications [2] . It is estimated by Leao et al. [2010] that production of pineapple fibers per hectare/year yields around 15 tonnes. The fibers can be considered to produce a negative cost, as they are currently dumped for composting. If this material is transformed into something more valuable, this negative cost can be translated into income for growers. Therefore this raw material results in a very low cost of US$15 per tonne in the field, compared to softwood fibers at US$250 per tonne in the field, representing an excellent opportunity. Pineapple leaf fibers (PALFs) could be a viable solution to the deficiency of long fibers in Brazil, and in many other tropical countries. Brazil is the world’s third largest producer of pineapple plant residue, with Thailand and the Philippines as the first and second, respectively. The total planted area in Brazil is about 60,000 hectares, with each hectare resulting in 1.5 tonnes of dry fiber, according to data obtained from Leao et al. [2010] for the Hawaiian variety. Through this raw material it will be possible to identify the crop production chain and bring a new and important resource for growers. Because there are new vegetable fibers being brought to market, there is a need to study in-depth the chemical and morphological characteristics of PALFs and evaluate in detail the optical, surface, and mechanical properties of these fibers. Through these characterizations, it will be possible to make a precise assessment of the market for special papers and composites applications, adding more value to these long fibers. The nano-fibers and nano-whiskers also represent an emerging alternative, thanks to the composition of the pineapple leaf (low lignin content), its high fineness index, and high aspect ratio. [3] . Pineapple leaf fiber are collected from the pineapple leaves either by scrapping, retting, or decortications and used for significant purposes without any additional input cost [4] . PALF is white, creamy and lustrous fiber. Various investigations show that pineapple leaf fiber is mainly composed of cellulose, hemicellulose, lignin, wax, pectin, inorganic and so on, the cellulose content of 56% - 82%. PALF contributed with excellent mechanical properties compared to other natural fibers. It has high specific strength and stiffness and it is hydrophilic in nature due to high cellulose content. In addition, these fibers can easily retain dyes. The crystallinity and preferred orientation of crystallites in pineapple fibers are high and the average fracture strength of the pineapple leaf fiber is high and the linear density is low, so there is a high fiber spin ability and yarn quality. Until now, there is no special spinning system have been designated for PALF spinning system [5] . Nowadays PALF are spun into yarns using existing fibers spinning system including jute spinning system, semi-worsted and flax system by binary or multi blending [6] . However, the PALF yarns produced still coarse and still not in line with cotton yarns properties [7] . In this investigation, accordance with its effective length and then yarn is made from the fiber, although the various table text styles are provided, the fiber was prepared to spin into cotton spinning system by cutting extracted and pretreated fiber.

The method was found to utilize the pineapple leaf fiber as a cost-effective one because of its good performence in properties. All of three types of the yarn demonstrated good tensile properties in spite of poorness of yarn evenness when compared solo staple fibre yarn of same count. However accuracy in evenness could be achieved by effective pretreatment and through slight modification of spinning method. Due to being natural cellulosic fiber, pineapple leaf fiber (PALF) can be used on manufacturing apparels as a breathable and convienent version, because of having hydrophilic fiber. Via efficient modification PALF can be source of manufacturing garments.

The authors declare no conflicts of interest regarding the publication of this paper.

Ismoilov, K., Chauhan, S., Yang, M. and Heng, Q. (2019) Spinning System for Pineapple Leaf Fiber via Cotton Spinning System by Solo and Binary Blending and Identifying Yarn Properties. Journal of Textile Science and Technology, 5, 86-91. https://doi.org/10.4236/jtst.2019.54008