In the last years, NSC KIPT has studied the areas of interface of Cu-Nb and Cu-Pb [1] [2] systems bonded by high-temperature vacuum rolling in solid phase. On results of this study the following deformation nano-deffects and processes were discovered, indicating the presence of the hydro-dinamic and rotation modes of deformation: “wave front” and dynamic nano-crystallisation, nano-dipoles of partial disclinations, and nano-dipoles of rotation disclinations.

The purpose of this work is to analyze all sequences of structural levels of wave processes that occur on macro-, micro- and nano-levels, on the interfaces Cu-stainless steel, bonded by high-temperature rolling in vacuum, considering the processes of mass-transfer in the areas of interface.

Solid-phase bonding of these materials was performed on the rolling machine ДУО-170 [3] in general package using transition layers-Ststeel-Cu-Nb-Ti under temperature 950˚C - 1000˚C in vacuum. Rolling deformation constituted 27% - 30%. Foils with thickness 0.15 - 0.2 mm were prepared from the package, bonded in solid phase. Samples for electron microscopic study were made from these foils. High-resolution electron microscopy (microscope JEM- 2100F ) was used for analyses of processes that occur on the interface of materials, bonded in solid phase by high-temperature vacuum rolling.

Metallographic study was performed on optical microscope Olympus GX-51 and raster electronic microscope ZEISS-EVO-50, equipped with energy dispersion analyzer INCA-450. Study of changes of micro-hardness and nano-hardness through the interface of stainless-steel-copper was performed on micro-hardness testing machine LECOLM-700 and nano-hardness testing machine NANOG200, manufactured in the USA in compliance with to the rules of international standard ISO 14577.

Macro-structural level. Surface waves of Kelvin-Helmholtz type with wave lengths 100 - 800 mcm [4] were observed on the interfaces of copper-stainless-steel, generated by high-temperature rolling. Examples of such processes are shown in Figure 1. It should be noted that such well-ordered wave structures are observed in the same materials under absolutely different conditions of solid-phase bonding, for example under explosion welding [5] .

Micro-structural level. Example of micro-structural (dislocation) level event is shown in Figure 2.

Figure 3 and Figure 4 demonstrate change of micro-hardness and nano-hardness relative to the interface of two metals. The following common patterns can be noted: less strength material―copper when reaching the interface is strengthening and more strength material―stainless steel―is softening. The

same tendencies are observed in the similar studies performed on Cu-Pb [2] system.

Results of the micro-X-ray-spectral analyses, showed in Figure 5, explain the results shown above. Essential mixture of components of copper and steel on both sides of the interface is observed. At this, the penetration depth of copper in steel exceeds considerably the penetration depth of chrome, nickel, and iron in copper. Again it should be noted, that the same tendency―deeper penetration of more low-melting metal was indicated in the recent paper [2] on Cu-Pb system.

Structural studies provide evidence of dislocation-stimulating diffusion of atoms of alloying elements from steel 08Х18Н10Т into copper during the high-temperature rolling in vacuum. It is confirmed by coincidence of visible in figure dislocation patterns and geometry of structures, formed by atoms diffusing from steel (compare Figure 6 and Figure 8). The most interesting was observation of the fact that atoms of alloying elements diffuse on deformation structure in the form of complexes, clusters, containing 3 - 5 atoms. Results of the analyses of atoms distribution into the depth of interface constitute the evidence of this (Figure 7 and Figure 8). This can be the evidence of collective character of non-equilibrium diffusion in conditions of high-temperature deformation of bonds. It can be assumed that there is existence of peculiar cooperative dislocation mechanism of atoms movement under impact of stress gradient, under conditions of high super-saturation of copper with deformation and thermal defects. As to the chrome, formation of clusters enriched with it, with add-mixtures and their transfer by dislocations to the interface in Fe-Cr alloys and steels, was experimentally determined in the paper [6] using the Atome Probe Tomography.

Effect of anomalous mass-transfer in the deformed with high speeds (or under conditions of impulsive loads) materials was in the focus of metal physicist [7] [8] [9] . It was determined that atoms mobility depends on the nature of diffusion element. Increase of atoms mobility on 1 - 2 order is observed with the growth of deformation level for the case of substitution atoms (as in the system Cu-stainless steel)

This corresponds to the main approach of physical meso-mechanics, according to which, under conditions of high excitation of the non-equilibrium structural condition caused by action of concentrated fluxes of energy, new allowed structural states occur in the interstitials of the crystal lattice [10] . According to the works of these authors, on N atoms of the solid body under conditions of excitation, there are 2 N of structural conditions, half of which turns to be vacant. So called atom vacancy configurations occur in the material, which can stipulate even the hydro-dynamic mass transfer, with collective displacement of atoms in the lattice.

Structure of the interface of the bonded materials was studied using high-resolution microscopy.

As it can be seen from Figure 9, even high-resolution electron microscopy provides limited opportunity for determination of the location of the materials interface, necessary for analysis. At the same time “Fourier purification” allows not only to determine the location of the interface, but also identifies a number of peculiarities of its structure.

Dislocation defects, limiting the spatial location of the interface are marked with arrows in Figure 9. The fact that their quantity from the lower side of the

interface is much larger, than from the upper site, indicates on the direction of mass-transfer (motion of the interface―top-down). The defects of the dislocation type form the non-completed, irregular dislocation wall with Burgers vector, comparable on module with lattice parameters. Just like for the case of niobium-copper [11] , the interface (in the most part of its length) is coherent with matrix excluding the area occupied by the mentioned above network.

Similar nano-defects were also discovered recently when using the high-resolution electronic microscopy in the alloy Ti-Nb structure [12] , but after large values of severe plastic deformation (e = 9.3).

1) Passing of the surface waves of Kelvin-Helmholtz type with wave lengths 100 - 800 mcm was observed on the interface copper-stainless steel generated by high-temperature rolling.

2) It was shown that changes of micro-hardness and nano-hardness relatively to the interface of two metals have common laws: less hard material―copper is hardening when approaching the interface of two metals and harder material―stainless steel is softening. This corresponds to the results of similar studies, performed on solid phase bonds Cu-Pb and Cu-Nb, performed according to the same methods and discovered with deeper penetration of more fusible metal.

3) Structural studies witness the dislocation-stimulated diffusion of atoms of alloying elements from steel 08Х18Н10Т into copper during the high-temperature rolling in vacuum.

4) New mechanism of this process was discovered, and connected with collective transfer of atomic clusters consisting of add-mixtures and alloying elements.

The authors declare no conflicts of interest regarding the publication of this paper.

Borts, B.V., Parkhomenko, A.A., Vorobyov, I.O. and Lopata, A.A. (2018) Wave Processes and Mass Transfer on the Copper-Stainless Steel Interface under Solid Phase Bonding by High-Temperature Rolling. Open Journal of Metal, 8, 67-74. https://doi.org/10.4236/ojmetal.2018.84005