A double mutantEst1, which is a plastic degrading cutinase-type esterase in
<i>
Thermobifida alba
</i>
, has been over
-
expressed in
<i>
Escherichia coli
</i>
. The recombinant protein was purified by a two-step protocol involving immobilized metal affinity
chromatography
and cation-exchange chromatography, yielding 120 mg of protein per liter of bacterial culture. Crystals have been obtained by using the sitting-drop vapor-diffusion technique. Native diffraction data to 1.37 Å resolution were obtained at the BL44XU beam line of SPring-8 from a flash-frozen crystal at 100 K. The crystals belong to space group
<i>
C
</i>
2, with unit-cell parameters
<i>
a
</i>
= 127.2
Å
,
<i>
b
</i>
= 42.1
Å
,
<i>
c
</i>
= 63.2
Å
,
<i>
β
</i>
= 114.7
°
, likely containing one Est1 double mutant (296 residues) per asymmetric unit.
Plastic degrading enzymes were very important for reducing plastic waste and various cutinases were capable to degrade plastic [1] . The genes for polyester-hydrolyzing enzymes from Thermobifida alba [2] , Thermobifida fusca [3] , and Thermobifida cellulosilytica [4] have been cloned and determined to encode serine hydrolases that belong to the lipase/esterase family. The genus Thermobifida possesses two tandem cutinase genes in general [5] . Thermobifida alba also produces two cutinases from different genes, est1 and est119 [6] . Est119, renamed cutinase2, was first investigated and characterized as polyester-hydrolyzing type esterase from Thermobifida alba [2] . Lately, it was found that Est1 also has the ability to degrade ester type plastics [5] . The two cutinases from Thermobifida alba showed different activities and thermostabilities, although they share 95% identity and 98% similarity. Est1 showed approximately 2-fold higher activity than Est119 [5] .
We first determined the crystal structure of Est119 as the polyester hydrolyzing type cutinase [7] . Other groups also determined the crystal structures of cutinases from Thermobifida fusca [8] and Thermobifida cellulosilytica [9] .
Est1 mutants were constructed for increasing thermostability and enzymatic activity. Interestingly, it was found that Est1 (A68V/T253P) double mutant (Est1DM) had higher enzymatic activity than wild type Est1 and Est119, and was stable for 1 hour below 333 K and even at 338 K, more than 70% and 50% activities were maintained after 30 and 60 min, respectively [6] . It is also reported that Est1DM degraded various aliphatic and aliphatic-co-aromatic polyesters and PET film [6] .
We wanted to shed light on the so far undiscovered structural bases of Thermobifida cutinases, and to unveil the relationships between high activities and thermostable differences from comparing cutinase 3D structures of Est1DM with Est119. Toward this goal, we present here the overexpression, purification, crystallization and preliminary X-ray diffraction analysis of the thermostable mutant of cutinase Est1 from Thermobifida alba.
2. Materials and Methods2.1. Protein Expression and Purification
Twenty mililiters of an overnight culture of E. coli cells Rosetta-gami B (DE3) transformed with pQE80L-est1 was inoculated to 400 mL of LB medium with 50 µg・ml−1 ampicillin (Table 1). Different culture conditions were tested with 10 mL small scale broth for expression check. The culture broth was grown at 310 K with vigorous shaking until the Abs600nm reached 0.6. Then protein expression was induced by the addition of isopropyl-1-thio-β-D-galactopyranoside (IPTG, Nacalai Japan) to the culture to give a final concentration of 0.1 mM. Two types temperature was tested with 310 K and 298 K, respectively. For the 310 K, both six hours and overnight (18 hours) culture after induction were tested. For 298 K culture were tested with overnight (18 hours). And then the cells were harvested by centrifugation at 4000 rpm for 30 min at 277 K, washed with ice-cold deionized distilled water, suspended in lysis buffer (50 mM Tris-HCl buffer pH 8.0 including 0.3 M NaCl and 1mM imidazole), and then disrupted by sonication with Ultrasonic Disruptor UD-211 (TOMY) at 273 K. The disrupted cell suspension was centrifuged at 8000 rpm for 40 min at 277 K to pellet insoluble material. The supernatant was purified by immobilized metal affinity chromatography (HIS-Select Nickel Affinity Gel, Sigma-Aldrich, Germany), which was equilibrated with lysis buffer, the sample was loaded and washed 5 times with lysis
Macromolecule production information
Source organism
Thermobifida alba
DNA source
Genbank AB445476
Forward primer
5’-CGCGGATCCAACCCCTACGAACGCGGC-3’
Reverse primer
5’-GCGAAGCTTGAACGGGCAGGTGGAGCGGT-3’
Cloning vector
pGEM-T
Expression vector
pQE80L-est1
Expression host
E. coli Rosetta-gami (DE3)
Complete amino acid sequence of the construct produced
buffer, then the soluble recombinant protein was eluted with an imidazole concentration gradient (1 - 500 mM) with lysis buffer. The Est1DM fraction was collected and dialyzed to buffer A (0.1 M NaCl 10 mM Tris-HCl pH 8.0) to remove imidazole. Further purification was carried out by MonoS (GE Healthcare, Sweden) column chromatography, which was equilibrated with buffer A, then the dialyzed protein was loaded and washed 5 times with buffer A, then the protein was eluted with a NaCl concentration gradient (0 - 1.0 M). The fractions containing the Est1DM protein were combined and dialyzed to 0.2 M NaCl 10 mM Tris-HCl pH 8.0. The Est1DM protein was concentrated to 15 mg・ml−1 by using a VIVASPIN 15 turbo concentrator (Sartorius, Germany) and sterile-filtrated by 0.1 μm Ultrafree-MC (Merck Millipore, Germany) device. The homogeneity of the purified preparation was confirmed by 15% SDS-PAGE and native PAGE.
Determination Specific Activity
Enzymatic activities were determined by using p-nitrophenyl butyrate (pNFB) ester substrates as previously described. For inhibition studies, the concentration of enzyme was adjusted to 0.001 mM, inhibitors to 0.2 mM, and pNFB to 1 mM. Each assay was performed at 37˚C in 50 mM Tris-HCI pH 8.0 containing 10% dimethyl-formamide in 1-ml cuvettes. Reactions were started by the addition of substrate after pre-incubation at 37˚C for 5 min with various inhibitors. The absorbance of liberated p-nitrophenol was monitored continuously at 405 nm and the initial linear velocity was used to calculate the specific activities of cutinases, which was expressed as an amount (μmol) liberated of p-nitrophenol using 1.0 mg cutinase in 1 min under above conditions.
2.2. Crystallization
For crystallization experiments, a 15 mg・ml−1 solution of the recombinant Est1DM, in 0.2 M NaCl, 10 mM Tris-HCl, pH 8.0, was employed. Crystallization trials were set up at 295 K as sitting-drop vapor-diffusion experiments on CryschemTM crystallization plates. Initial screening was performed using the sparse-matrix method [10] with commercial crystal screening kits (Hampton Research). Several condition optimizations were performed by changing protein concentration, precipitant concentration and pH.
2.3. Data Collection and Processing
X-ray diffraction data on Est1DM crystals were collected at 100 K in a nitrogen stream, supplementing the mother liquor solution with 30% PEG400 as cryoprotectant. X-ray preliminary data sets were collected from a single crystal on beamline BL44XU at SPring-8. The X-ray wavelength was 0.9 Å, the angle oscillation range was 1.0˚ and the crystal-to-detector distance was 180 mm. The diffraction images were integrated and scaled using the program packages HKL2000 [11] .
3. Results and Discussion
Est1DM was expressed in E. coli and purified by affinity-resin and cation-exchange chromatography. Different temperature and shaking time of growth conditions were tried several times for obtaining a large number of recombinant protein. The overnight culture at 310 K gave very few amount of proteins (Table 2), but the six hours culture after induction with IPTG, which was enough even 0.1 mM final concentration, gave a lot of cutinase after immobilized metal affinity chromatography (IMAC) with batch methods (Figure 1(a)). But the overnight culture at 298 K gave a twice amount of Est1DM than 310 K with six hours (Table 2). Results of growth conditions and the protein amounts by IMAC batch methods are given in Table 2. It has been successfully improved to obtain a large amount of purified recombinant Est1DM; the protein yield was more than 120 mg per liter of E. coli culture (Figure 1(b)). This condition is suitable for protein crystallization experiments including crystallization
Improving of growth conditions
Est1-dm
Est1-dm
Est1-dm
Culture conditions
25˚C O/N
37˚C・6h
37˚C O/N
Culture volume (mL)
10
10
10
IPTG concentration (mM)
0.1
0.1
0.1
Harvested cells (g)
0.3
0.2
0.4
Eluted volume (mL)
5
5
5
Protein concentration (mg/mL)
2
1
0.12
Total protein (mg)
10
5
0.6
Cell were suspended 30 mL with lysis buffer after loading sample on Ni column, the columns were washed 12 mL with lysis buffer. (lysis buffer; 1 mM imidazole 10 mM Tris-HCl pH8, 0.3 M NaCl) Then the columns were eluted by batch method with 250 mM imidazole 10 mM Tris-HCl pH8, 0.3 M NaCl.
Crystallization
Method
Sitting-drop vapor diffusion
Plate type
24-well
Temperature (K)
295
Protein concentration (mg・mL−1)
15
Buffer composition of protein solution
10 mM Tris-HCl pH8.0, 200 mM NaCl
Composition of reservoir solution
7% PEG 4000, 0.2 M Sodium Acetate 0.1 M MES pH6.5
Volume and ratio of drop
1:1
Volume of reservoir (mL)
0.5
screening. The final purified protein was confirmed by SDS-PAGE as shown in Figure 1(c) and the enzymatic activity was also confirmed by using p-nitrophenyl butylate as a hydrolyzing substrate (data not shown).
Crystallization screenings were repeated using various crystallization kits. Crystals of the recombinant Est1DM proteins were readily grown from polyethylene-glycol solutions. The best crystals were obtained through equilibration against a solution containing 5% - 8% PEG3350, 0.1 M sodium acetate and 0.1 M MES buffer, pH 6.5, 293 K, in sitting-drop vapor-diffusion setups (Table 3). The crystallization droplets consisted of 1 µl protein and 1 µl reservoir solutions, with 500 µl of reservoir solution, plate like crystals appeared within a few weeks and grew to maximum dimensions of about 1.5 × 0.2 × 0.1 mm3 (Figure 2).
X-ray diffraction data were collected at a resolution of 1.37 Å (Figure 3). The crystals belonged to the centered monoclinic space group C2, with unit-cell parameters a = 127.2 Å, b = 42.1 Å, c = 63.2 Å, β = 114.7˚ (see Table 4). A total of 250,545 reflections in the resolution range 50.0 - 1.37 Å were collected with 98.3% completeness and an R merge of 4.7%. The data-collection and processing statistics are summarized in Table 4. Assuming a Mr of 31.7 kDa (296 residues) for the expressed Est1DM domain, packing density calculations indicate the most probable value for VM as 2.42 Å3 Da−1, with one Est1DM chain per asymmetric unit. This corresponds to a solvent fraction of about 49.2%, a typical value for protein crystals [12] .
We are currently attempting phase determination by the molecular-replacement method using the crystal structure of Est119 from Thermobifida alba (PDB entry 3VIS) [7] as a search model with the program [13] included in the CCP4 program package [14] . A single correct solution was found and complete structure determination and refinement are in progress.
Acknowledgements
We are grateful to all members of beamline BL44XU at SPring-8 for their help in collecting data. Use of the synchrotron beamline BL44XU at SPring-8 was obtained through the Cooperative Research Program of the Institute for Protein
Research, Osaka University. We also thank to Prof. Fusako Kawai, for kindly giving us the est1 mutant genes. This work was supported in part by
Data collection and processing values for the outer shell are given in parentheses
Diffraction source
BL44XU, SPring-8
Wavelength (Å)
0.9
Temperature (K)
100
Detector
MX300HE
Crystal-detector distance (mm)
190
Rotation range per image (˚)
1
Total rotation range (˚)
200
Exposure time per image (s)
1
Space group
C2
a, b, c (Å)
127.2, 42.1, 63.2
α, β, γ (˚)
90.0, 114.7, 90.0
Mosaicity (˚)
0.33
Resolution range (Å)
50 - 1.37 (1.39 - 1.37)
Total No. of reflections
250,545
No. of unique reflections
62,727
Completeness (%)
98.3 (99.7)
Redundancy
4.0 (4.0)
〈I/σ(I)〉
25.3 (10.1)
Rr.i.m.
0.058 (0.194)
Overall B factor from Wilson plot (Å2)
15.2
Grants-in-Aid for Scientific Research from the Ministry of Education, Culture, Science and Technology of Japan.
Cite this paper
Kitadokoro, K., Matsui, S., Osokoshi, R., Nakata, K. and Kamitani, S. (2018) Expression, Purification and Crystallization of Thermostable Mutant of Cutinase Est1 from Thermobifida alba. Advances in Bioscience and Biotechnology, 9, 215-223. https://doi.org/10.4236/abb.2018.95015
Abbreviations Used
Est1DM (cutinase est1 double mutant), PET (Polyethylene Terephthalate).
ReferencesPio, T.F. and Macedo, G.A. (2009) Cutinases: Properties and Industrial Applications. Advances in Applied Microbiology, 66, 77-95. https://doi.org/10.1016/S0065-2164(08)00804-6Hu, X., Thumarat, U., Zhang, X., Tang, M. and Kawai, F. (2010) Diversity of Polyester-Degrading Bacteria in Compost and Molecular Analysis of a Thermoactive Esterase from Thermobifida alba AHK119. Applied Microbiology and Biotechnology, 87, 771-779. https://doi.org/10.1007/s00253-010-2555-xDresler, K., Heuvel, J., Muller, R.J. and Deckwerl, W.D. (2006) Production of a Recombinant Polyester-Cleaving Hydrolase from Thermobifida fusca in Escherichia coli. Bioprocess and Biosystems Engineering, 29, 169-183. https://doi.org/10.1007/s00449-006-0069-9Acero, E.H., Ribitsch, D., Steinkellner, G., Gruber, K., Greimel, K., Eiteljoerg, I., Trotscha, E., Wei, R., Zimmermann, W., Zinee, M., Cavco-Paulo, A., Freddi, G., Schwab, H. and Guebitz, G. (2011) Enzymatic Surface Hydrolysis of PET: Effect of Structural Diversity on Kinetic Properties of Cutinases from Thermobifida. Macromolecules, 44, 4632-4640. https://doi.org/10.1021/ma200949pThumarat, U., Nakamura, R., Kawabata, T., Suzuki, H. and Kawai, F. (2012) Biochemical and Genetic Analysis of a Cutinase-Type Polyesterase from a Thermophilic Thermobifida alba AHK119. Applied Microbiology and Biotechnology, 95, 419-430. https://doi.org/10.1007/s00253-011-3781-6Thumarat, U., Kawabata, T., Nakajima, M., Nakajima, H., Sugiyama, A., Yazaki, K., Tada, T., Waku, T., Tanaka, N. and Kawai, F. (2015) Comparison of Genetic Structures and Biochemical Properties of Tandem Cutinase-Type Polyesterases from Thermobifida alba AHK119. Journal of Bioscience and Bioengineering, 120, 491-497. https://doi.org/10.1016/j.jbiosc.2015.03.006Kitadokoro, K., Thumarat, U., Nakamura, R., Nishimura, K., Karatani, H., Suzuki, H. and Kawai, F. (2012) Crystal Structure of Cutinase Est119 from Thermobida alba AHK119 that Can Degrade Modified Polyethylene Terephthalate at 1.76 A Resolution. Polymer Degradation and Stability, 97, 771-775. https://doi.org/10.1016/j.polymdegradstab.2012.02.003Roth, C., Wei, R., Oeser, T., Then, J., Föllner, C., Zimmermann, W. and Sträter, N. (2014) Structural and Functional Studies on a Thermostable Polyethylene Terephthalate Degrading Hydrolase from Thermobifida fusca. Applied Microbiology and Biotechnology, 98, 7815-7823. https://doi.org/10.1007/s00253-014-5672-0Ribitsch, D., Hromic, A., Zitzenbacher, S., Zartl, B., Gamerith, C., Pellis, A., Jungbauer, A., Lyskowski, A., Steinkellner, G., Gruber, K., Tscheliessnig, R., Herrero Acero, E. and Guebitz, G.M. (2017) Small Cause, Large Effect: Structural Characterization of Cutinases from Thermobifida cellulosilytica. Biotechnology and Bioengineering, 114, 2481-2488. https://doi.org/10.1002/bit.26372Jancarik, J. and Kim, S.H. (1991) Sparse Matrix Sampling: A Screening Method for Crystallization of Proteins. Journal of Applied Crystallography, 24, 409-411. https://doi.org/10.1107/S0021889891004430Otwinowski, Z. and Minor, W. (1997) Processing of X-Ray Diffraction Data Collected in Oscillation Mode. Methods in Enzymology, 276, 307-326.https://doi.org/10.1016/S0076-6879(97)76066-XMatthews, B.W. (1968) Solvent Content of Protein Crystals. Journal of Molecular Biology, 33, 491-497. https://doi.org/10.1016/0022-2836(68)90205-2Vagin, A. and Teplyakov, A. (2010) MOLREP: An Automated Program for Molecular Replacement. Acta Cryst, D66, 22-25. https://doi.org/10.1107/S0907444909042589Winn, M.D., Ballard, C.C., Cowtan, K.D., Dodson, E.J., Emsley, P., Evans, P.R., Keegan, R.M., Krissinel, E.B., Leslie, A.G.W., McCoy, A., McNicholas, S.J., Murshudov, G.N., Pannu, N.S., Potterton, E.A., Powell, H.R., Read, R.J., Vagin, A. and Wilson, K.S. (2011) Overview of the CCP4 Suite and Current Developments. ActaCryst, D67, 235-242. https://doi.org/10.1107/S0907444910045749