Recently, the market for drones is growing rapidly. Commercial UAVs (Unmanned Aerial Vehicles, or drones) are increasingly being used for various purposes, such as geographic survey, rescue missions, inspection of industrial facilities, traffic monitoring and delivery of cargos and goods. In particular, the drones have great potential for life-saving operations. A missing person, for example, can be rapidly and effectively searched using a drone in comparison with the conventional search operations. However, there is no commercially available rescue UAV until now. The motivation for this study is to design an unmanned aerial vehicle capable of vertical takeoff and landing, while containing a high power propellant apparatus in order to lift a heavy cargo that contains rescue materials (such as water, food, and medicine). We used the EDF (Electric Ducted Fan) technology as opposed to the conventional motor and prop combination. The EDF can produce the power about three times higher than the motor-prop combination. This became suitable for transportation of rescue goods, and can be widely used in rescue operations in natural environments. Based on these results, the UAV for rescue material transport capable of heavy vertical takeoff and landing is developed, including airframe, flight control computer and GCS (ground control station).
In recent years, the use of drones or UAVs (unmanned aerial vehicles) is increasingly getting popular around the world. Drones are utilized in aerial photography for both personal hobbies and commercial uses. In industrial sectors, drones are deployed in facility inspection, power line inspections, and monitoring of fire and flood purposes. In almost every imaginable part, the drones are being used [
Currently, various hobby and surveillance drones are being developed and commercially available in Korea, but no high power drones are developed yet, with the high load carrying capacity. Most hobby drones cannot carry enough load, and even the large size drone can only carry less than 1 or 2 Kilograms. The biggest agricultural drones can carry about 10 to 15 Kilograms of payload, but they are too large for police rescue operations [
The drones that we want to make in this study basically have to deliver relief goods to people located in the middle of the building in case of fire and emergency situation in high-rise building. At this point, the most important point is that the drones must be close to the outer wall of the building to deliver relief supplies. In case of EDF (Electric Ducted Fan), it is possible to approach close to the building because the rotating prop is contained inside the turbine housing. However, when the conventional propeller motor is used, the drone is difficult to approach the building because the exposed propeller may hit the structure and the drone will fall from the sky. Ultimately, this difference is the biggest reason to use the EDF motors in developing the rescue drone [
The battery is a major factor in controlling the drones' flight time and output. The larger the capacity of the battery, the longer the flight time, and the higher the number of cells in a series connected battery. The selected EDF requires a higher voltage than the propeller and motor combination, so we select a battery with 6 - 8 cells. The battery has a high stability and uses a lithium ion polymer material. This is because the electrolyte of the lithium ion battery is a liquid and basically has a problem in stability. We also considered trade-offs in battery capacity and weight. Electric vehicles’ biggest dilemma is the proportional relationship between the capacity and weight. When a heavy battery is used in a
EDF with a duct, the weight of an automatic cardioverter defibrillator (AED), a fire mask, a lantern, and other rescue materials need to be reduced. Also, the weight of the drone itself can be increased significantly. The selected battery is PT-B10000-NSR35 model and has specifications of 22.2 V, 6S1P, 35C+, as shown in
Four EDFs are designed in four directions to balance the drones. Fixtures for installing ESC (electric speed controller), battery holder, GPS transceiver and other fixtures are installed on the center top plate. In addition, a fixture for installing a structural goods transport box is installed in the lower part, and two supports for stably loading and unloading the drones are installed. The material of the frame was made of carbon material to minimize the weight of the drone, and some aluminum parts were also used, as shown in
In order to minimize the imbalance in the flight of the drones, a rectangular box-shaped model penetrating the bottom of the drones was adopted. The vertical length is the minimum length, which is larger than the length of the frame including the EDF to avoid interference with the EDF. The height is defined as the maximum length that can be installed between the support and center of the drones frame. In order to deliver the rescue supplies, the drones must be approached through the windows and the being rescued person must reach the arm and bring the rescue supplies. Since the drones are not fully accessible to the building, the length of the arm of the person should be considered with the minimum length. In this case, it is necessary to design the arm length so that it is not difficult for both a person with a shorter arm and a person with a longer arm to approach, as shown in
The material called “Foam-max” was considered because of the weight and the strength of the box itself. Foam-max is foamed and compressed by using PVC as raw material and it is very easy to process while maintaining the advantages of plastic and wood. It was to create boxes and to make room for speakers in the middle. Speakers installed in the drones are able to communicate with the stranded person who are in need. It is also possible to reserve extra batteries in case of remaining space. In addition, a partition was installed to prevent internal objects from moving during the flight, thus preventing the center of gravity of the drones from being disturbed [
In the case of storage space for rescue materials, it is possible to store about 1 kilogram of materials. It is possible to store items according to the purpose and to greatly increase the survival rate in case of fire, such as oxygen cans, masks, firefighting clothes, fire extinguisher, water, water towel, and so on. Structural rope, radio, and emergency medicine can also be stored. In addition, if a cardiac arrest patient is present, the attached box can be removed and the cardiac defibrillator, portable AED, attached to the lower part of the drone can be delivered. When a high-rise building is delivered to a rescue target in the middle or upper floors, it approaches the building window and draws the rope connected to the storage bag connected to the storage box to deliver the rescue goods. As illustrated in
1) Pull out the line outside the box.
2) At the same time the door is opened, the rescue materials come out.
3) Hold the rescue supplies.
4) Pull the rescue supplies.
The details of the developed drone is given in
In this study, EDF was selected because of the safety problem of the propeller, but it was not able to produce 4.5 kg of thrust as indicated in the product specification. 4.5 kg When 4 EDFs were used, the specification gave 18 kg of thrust.
Except for the weight of the body, 10 kg of thrust was expected, but the actual thrust was only 10.5 kg. And a run-time of 1/10th compared to propeller aircraft capable of flying over 30 minutes.
Thrust determination equation is as follows [
Power = Prop Const ∗ r p m Power Factor
The equation to determine the propeller was as follows.
T = π 4 D 2 ρ ν Δ ν
T = thrust [N]
D = propeller diameter [m]
ν = velocity of air at the propeller [m/s]
Δ ν = velocity of air accelerated by propeller [m/s]
ρ = density of air [1.225 kg/m3]
The thrust ratio was calculated by excluding the air velocity (v) related factor through the thrust formula. And when using a propeller, it was calculated that four times as much thrust was possible. This is because the diameter of the propeller has the greatest influence on thrust. To develop an EDF that produces the same thrust as a 4× long propeller, it required 16 times the revolutions per second, which drastically reduced battery life. In addition, it required a high voltage of 30 V compared to a propeller requiring 22.2 V. In the case of a commercially available battery, the maximum voltage was 6s (3.7 V × 4 = 22.2 V). Finally, the weight of the EDF itself was 900 g, totaling 3.6 kg. It was about 9 times the weight of the propeller and I think it was the biggest weight gain factor in the airframe design that we are trying to reduce 1g. In order to compare the exact thrust between the propeller and the EDF, I think it would be necessary to consider vortex elimination and air compression rise through the duct. In order to actually introduce EDF, which has the advantage of safety, we need three things: 1, lighter weight, 2. efficiency, and 3. propeller size [
UAVs capable of high-power, vertical takeoff and landing can complement the disadvantages of conventional UAV’s lack of power and maximize utilization throughout the industry. Through this technology development, we localize the core technology of UAV that can control high power and vertical flight stably. As the demand for UAV increases in the future, it will lay the foundations for developing various types of UAVs (courier, transportation, delivery, lifeguard, etc.) that meet customer demand. Expected effects of meeting domestic demand, import substitution and export will be created. In the future, we will complement the problems analyzed in this study and design a new type of drone. In the end, we will develop more than 25 kg payload so that it can be utilized for life-saving and transportation of rescue materials.
This work was supported by the Ajou University research fund.
Jo, D. and Kwon, Y. (2017) Development of Rescue Material Transport UAV (Unmanned Aerial Vehicle). World Journal of Engineering and Technology, 5, 720-729. https://doi.org/10.4236/wjet.2017.54060