A compact stellar object is formed by an equilibrium state which is reached after condensation and contraction of a massive gas cloud. At this state thermal radiation pressure together with normal fluid pressure balances the gravitational binding energy. Various studies are made for understanding the formation of compact star, its physical properties and internal structure by the solution of Einstein’s field equation. Therefore the static isotropic and anisotropic exact solution which describes the compact star is caused to enthusiasts the Researchers to conduct the work in the same field. The study of interior of massive fluid ball can be made by well behaved solution of Einstein’s field equation. These equations were solved by Schwarzschild for the interior of the static compact stellar object. The first ever two exact solution of Einstein field equation for a compact object in static equilibrium was obtained by Schwarzschild [1] in 1916. The first solution corresponds to the geometry of the space-time exterior to a static perfect fluid ball, while the other solution describes the interior geometry of a fluid sphere of constant energy-density. Tolman [2] has obtained eight different types of exact solu- tions for static cases. The III solution corresponds to the constant density solution obtained earlier by Schwarzschild. The V and VI solutions correspond to infinite density and infinite pressure at the centre, hence not considered physically viable. Thus only the IV and VII solutions of Tolman are of physical relevance. Despite the non linear character of Einsteins field equations, various exact solutions for static and spherically symmetric metric are available in the related literature.

The search for the exact solutions is of continuous interest to researcher. Buchdahl [3] proposed a famous bound on the mass radius ratio of relativistic fluid spheres which is an important contribution in order to study the stability of the fluid spheres. Delgaty- Lake [4] studied all the then existing solutions and established that Adler [5] , Heintzmann [6] , Finch and Skea [7] , etc. do not satisfy all the well behaved conditions and also pointed out that only nine solutions are well behaved; out of which seven in curvature coordinates (Tolman, Patwardhan and Vaidya [8] , Mehra [9] , Kuchowicz [10] , Matese and Whitman [11] , Durgapals two solutions [12] ) and only two solutions (Nariai [13] , Goldman [14] ) in isotropic coordinates. Ivanov [15] [16] , Pant [17] , Maurya and Gupta [18] , Pant et al. [19] [20] studied the existing well behaved solutions of Einstein field equations in isotropic coordinates. Recently we have found some exact solutions of Einsteins field equations for anisotropic fluid given by Herrera et al. [21] [22] , Komathiraj and Maharaj [23] , Thirukkanesh and Regel [24] , Sunzu et al. [25] , Chaisi and Maharaj [26] , Maurya and Gupta [27] , Gupta and Maurya [28] . Some pioneer work in Relativity is given by Fuloria et al. [29] , Whitman and Burch [30] , Bonner and Vickers [31] , Pant and Negi [32] , Herrera and Santo [33] Tikekar [34] , Gupta and Kumar [35] , Herrera et al. [36] [37] [38] [39] , Tewari and Charan [40] [41] [42] , Tewari [43] , Ivanov [44] [45] [46] [47] [48] , Maurya and Gupta [49] and Pant et al. [50] [51] .

In this paper we present a new solution in spherically symmetric canonical coordinates which is well behaved. We present a new general solution of Einstein Field Equations and its detailed study, in order to construct a realistic model of compact star. In our present study the paper consists of eight sections. In Section 2 Einstein’s field equations in canonical coordinates are given. Expressions of density, anisotropic pressures( radial and transverse pressures), anisotropy parameter and redshift are incorporated in this section. Section 3 consists of boundary conditions for well behaved solutions. A new class of general well behaved solution of Einstein’s field equations in canonical coordinates is given in Section 4. This section also includes a particular

solution for for constructing a new realistic model for compact star. Section 5

stipulates the properties of this new class of solution of Einstein’s field equations. In Section 6 the matching conditions of interior metric of the fluid with the Schwarzschild exterior metric are given. For better illustration of our physically accepted solutions, the relevant physical quantities are presented by means of tables and figures in Section 7. Finally, some concluding remarks have been made in Section 8.

The Einstein’s field equations of general relativity are

where, the energy momentum tensor for a anisotropic fluid ball is defined as

where is the proper density, and are pressures of the fluid in the direction of (radial pressure)and orthogonal to (tangential pressure) respectively, time-like four-velocity vector, is the unit space like vector in the direction of radial vector and metric tensor of space-time.

The interior space-time metric for spherically symmetric fluid distribution is given by

where A and B are functions of r only.

In view of the metric (3) and energy momentum tensor (2), the field Equation (1) gives

where

The gravitational redshift of massive spherically symmetric ball is

which gives central and surface gravitational redshifts

and

For well behaved nature of the solution in isotropic coordinates, the following conditions should be satisfied (Bonnor-Vickers [31] ):

(i) The solution should be free from geometrical and physical singularities. Metric potentials A and B must be non-zero positive finite for free from geometrical singularities while central pressure, central density, should be positive and finite or and for free from physical singularities.

(ii) The solution should have maximum positive values of pressure and density at the center and monotonically decreasing towards the surface of fluid object i.e.

(a) and such that the radial pressure gradient, is negative for.

(b) and such that the tangential pressure gradient, is negative for.

(c) and such that the density gradient, is negative for.

(iii) The radial pressure must be equal to the tangential pressure at the center i.e..

(iv) At boundary radial pressure, must vanish while tangential pressure, may not vanish.

(v) The radial pressure, , tangential pressure, and density should be positive.

(vi) Solution should have positive value of pressure-density ratio which must be less than 1 (weak energy condition) and less than (strong energy condition) throughout

within the fluid object and monotonically decreasing as well. (Pant and Negi [32] ).

(vii) The condition that the velocity of sound should be less than that of light throughout the model must be satisfied i.e. and. The velocity of sound should be monotonically decreasing towards the surface and increasing with the increase of density i.e. or and or. In this context it is worth mentioning that the equation

of state at ultra-high distribution has the property that the sound speed is decreasing outwards.

(viii) The anisotropy factor should be zero at the center and incresing towards the surface of fluid object.

(ix) For realistic matter, adiabatic index, everywhere within the ball.

(x) The red shift should be positive finite everywhere within and on the fluid sphere, and is monotonically decreasing in nature with the increase of radius from the center.

(xi) The stability factor should lie between and throughout the ball.

Under these conditions, we have to assume the one of the gravitational potential component in such a way that the field Equation (1) can be integrated and solution should be well behaved.

We present the following general analytic solution of the field Equations (4) to (7)

The anisotropic pressures, matter-energy density, red shift and anisotropic parameter of fluid ball are given by

Here a, b, and d are arbitrary constants.

In order to construct a new relativistic model, we assume then we have

The anisotropic pressures, matter-energy density, red shift and anisotropic parameter of fluid ball are given by

Here a, b, and d are arbitrary constants.

In view of Equations (21) and (22) the rate of change of pressures with radial distance from the center and are given by

In view of Equation (23), (24) and (25) the rate of change of density, red shift and anisotropy parameter with radial distance from the center, , and are given by

For real values of metric potentials A and B,. Figure 1 shows that the metric potentials A and B are positive at the center which are slightly and monotonically increasing with r for suitable choice of constants, and. For the positive central value of A,.

The central value of, and are given as,

It is clear from Equaiton (31) to Equaiton (33) that for positive central values of physical quantities, , and are positive if, and. In view of Equaitons (26) to (30), the variation in the pressure, density, red

shift and anisotropy parameter with the radial distance from the center of fluid ball are identically zero at the center.

At the center of fluid ball the second order derivatives of radial and tangential pressures with respect to radial distance from the center of fluid ball are

The radial pressure is maximum at the center if . The tangential pressure is maximum at the center if. At the center of fluid ball the second order derivative of density with respect to radial distance from the center of fluid ball is

The density is maximum at the center for all constants as .

The central equation of state

and must satisfy the condition and which demands.

The central values of square of ratio of speed of sound and speed of light i.e. and are given by

and

The causality conditions at the center and give and respectively.

At the center of fluid ball, the second order derivatives of red shift and anisotropy parameter with respect to radial distance from the center of fluid ball are

Red shift is maximum at the center if. The anisotropy parameter is minimum at the center since.

It is found that the metric potentials A and B are positive at the center which are slightly and monotonically increasing with r, anisotropy parameter increases from zero at the center to maximum positive value at the boundary and the red shift is zero at the center which is monotonically increasing with r (Figure 1). The density and pressure fall monotonically from their maximum positive values at the center up to non negative values at the boundary while radial pressure falls monotonically from it’s maximum positive values at the center up to zero value at the boundary (Figure 2) for different values of the parameters, , satisfying

The value of falls monotonically from it’s maximum positive values at the center up to zero value at the boundary and the value of falls monotonically

from their maximum positive values at the center up to non negative values at the boundary (Figure 3).

Figure 4 shows that speeds of sound are less than speed of light i.e.,

and the ratio of speeds of sound and light falls monotonically from center to the boundary of the fluid ball.

The adiabatic index (and)falls monotonically from their maximum positive values at the center up to non negative values at the boundary (Figure 5).

Figure 6 shows that the stability factor lies between and.

The solution so obtained are to be matched over the pressure free boundary of fluid sphere smoothly with the Schwarzschild exterior metric:

which requires the continuity of and across the boundary and. Thus

where;, Schwarzchild parameter.

In view of Equaitons (45) to (48) the values of, , and are and respectively and the value of for

. For better illustration of our physically accepted solution, the relevant physical quantities are presented by means of Table 1 and Table 2 and Figures 1-6 for these constants.

In order to construct a super dense star model, we prescribe the surface density of the star as and the values of constants, and can be evaluated for different values of for describing the well behaved solutions. Thus a compact star model can be constructed by finding mass and radius corresponding to assumed surface density. The variation in the mass and radius with Schwarzschild parameters for our model of compact star is tabulated in the Table 3.

Table 3 shows that neutron star model can be constructed for different values of ranging from 0.143 to 0.243. The variations in, radius R, mass M, central red shift and surface red shift with Schwarzschild parameter are shown in the Figure 7.

We have given a new solution for spherically symmetric anisotropic fluid ball. It has been observed that the physical parameters pressure, density, and redshift are positive at the centre and within the limit of realistic state equation and monotonically decreasing and the causality condition is obeyed throughout the fluid ball. Thus, the solution is well behaved for all values of Schwarzschild parameter within the perfect fluid ball. Our solution is useful to construct the models of compact star like Strange star family, Neutron star and many more. We have discussed a model of massive neutron star having mass and radius 18 km with surface density and central density. The central radial and tangential pressures of neutron star are while the surface radial pressure of the star is zero and surface tangential pressure is. Table 1 shows that we can construct different models for neutron star having mass lies between and for different values of ranging from 0.143 to 0.245. The solution reduces to Schwarzschild interior solution for and for isotropic pressure.

Authors would like to thank to anonymous referee for rigorous review, constructive comments and valuable suggestions.

Sah, A. and Chandra, P. (2016) Spherical Anisotropic Fluid Distribution in General Relativity. World Journal of Mechanics, 6, 487-504. http://dx.doi.org/10.4236/wjm.2016.612034