1. Introduction

Agricultural Sciences

2156-8553

Scientific Research Publishing

10.4236/as.2016.710070

AS-71553

Articles

Biomedical&Life Sciences Earth&Environmental Sciences

Benefit of Adding Ammonium Sulfate or Additional Glyphosate to Glyphosate in Corn and Soybean

Nader

Soltani

¹Robert

E. Nurse

²Christy

Shropshire

¹Peter

H. Sikkema

University of Guelph Ridgetown Campus, Ridgetown, Canada

Agricuture and Agri-Food Canada, Harrow, Canada

21102016

0710759770September 14, 2016Accepted: October 24, October 27, 2016

2014

This work is licensed under the Creative Commons Attribution International License (CC BY). http://creativecommons.org/licenses/by/4.0/

Nine field trials (4 in corn and 5 in soybean) were conducted over 2 years (2014 and 2015) to determine if there is greater benefit of adding ammonium sulfate (AMS) (2.5 L·ha ^ˉ1 ) or an equal dollar value of glyphosate (406 g·ae·ha ^ˉ1 ) to glyphosate applied at 450, 675 or 900 g·ae·ha ^ˉ1 for weed control in corn and soybean. Glyphosate applied at 450 g·ae·ha ^ˉ1 controlled velvetleaf 90% to 98%, common ragweed 80% - 97%, common lambsquarters 91% - 99%, Eastern black nightshade 83% - 100% and barnyardgrass 73% - 97% in corn and common ragweed 37% - 89%, common lambsquarters 39% - 98%, barnyardgrass 90% - 98% and green foxtail 91% - 98% in soybean. The addition of AMS to glyphosate applied at 450, 675 or 900 g·ae·ha ^ˉ1 provided little to no added benefit for the control of velvetleaf, common ragweed, common lambsquarters, Eastern black nightshade, barnyardgrass and green foxtail in corn and soybean. There was a greater benefit in weed control efficacy by simply adding and equal dollar value of glyphosate (406 g·ae·ha ^ˉ1 ) than AMS (2.5 L·ha ^ˉ1 ) to glyphosate. There was no difference in corn or soybean yield among the herbicide treatments evaluated. Based on these results, addition of AMS to glyphosate at rates evaluated had little benefit on weed control efficacy or yield of corn and soybean.

Abutilon theophrasti Ambrosia artemisiifolia Corn (Zea mays) Chenopodium album Echinochloa crus-galli Efficacy Glyphosate Setaria viridis Soybean (Glycine max) Yield

1. Introduction

The Ontario corn and soybean industry covers about 2,000,000 ha, and has annual farm-gate value of approximately $3.3 billion [1] . Development of management strategies for the control of weeds in corn and soybean has been voted as the number one research priority by the Ontario Weed Committee (the voting members of the Ontario Weed Committee are representatives of the commodity groups such as corn, soybean, wheat and edible beans, industry personnel and public research scientists). Losses due to weeds include reduced yield, decreased quality, reduced field efficiency, and greater losses due to spoilage, increased dockage at the point of sale, and potential rejection of the crop.

Currently, more than 90% of the corn and 79% of soybean produced in Ontario are seeded to glyphosate-resistant hybrids/cultivars [2] . Glyphosate-resistant corn and soy- bean provide Ontario crop producers cost-effective weed management options that are efficacious and environmental friendly [3] . The net economic benefit to farmers is the main reason for wide adoption of this technology by crop producers in eastern Canada [4] . Despite glyphosate broad spectrum weed control, inconsistencies in control of some weed species have been reported at some locations which have been associated with water carrier solution [5] [6] . Nurse et al. [7] has shown benefit of adding AMS to glyphosate at low dose (225 g∙ha⁻¹) shortly after application (7 DAA) for control of velvetleaf (Abutilon theophrasti Medic.), however, at the same time there were no benefit for control of common lambsquarters (Chenopdium album L.), redroot pigweed (Amaranthus retroflexus L.), and annual grasses such as foxtails (Setaria spp.) . It has been proposed that in the presence of AMS, the sulfate ion, binds with Ca²⁺ to form CaSO₄ and prevents formation of a Ca-salt of glyphosate, which is poorly absorbed by the leaves [6] . Instead binds with the glyphosate molecule which results in greater absorption of glyphosate into the leaves and therefore improves weed control [6] .

Limited information exists on the effect of ammonium sulfate added to glyphosate in corn and soybean under Ontario environmental conditions which can lead to unnecessary expenditures.

The objectives of this research were to determine the benefit of adding ammonium sulfate or an equal dollar value of glyphosate (406 g∙ae∙ha⁻¹) to glyphosate applied at 450, 675 or 900 g∙ae∙ha^-1 for weed control in corn and soybean.

2. Materials and Methods

Four field trials (1 at Harrow in 2014 and 3 at Ridgetown in 2015) in corn and 5 field trials in soybean (1 at Harrow in 2014, 1 at Exeter in 2014 and 3 at Ridgetown in 2015) were conducted at the Agriculture and Agri-Food Canada Research Station, Harrow, Ontario, Huron Research Station, Exeter, Ontario and University of Guelph, Ridgetown Campus, Ridgetown, Ontario. The soil ranged from sandy loam to clay loam with 30% to 83% sand, 5% to 36% silt, and 13% to 33% clay, with 2.6% to 5.6% organic matter content and pH 6.0 to 7.4. Seedbed preparation included fall mouldboard plowing followed by two passes with a field cultivator with rolling basket harrows in the spring.

Studies were established as a randomized complete block design with four replications. Treatments for corn and soybean trials were the same and are listed in Tables 1-9. Weed-free control was maintained weed-free by hand hoeing as needed. Each plot was 3 m wide and 8 or 10 m long and consisted of four rows of glyphosate resistant corn/soybean spaced 0.75 m apart. Corn was planted at a rate of approximately 75,000 seeds∙ha⁻¹ in May of each year. Soybean was planted at a rate of approximately 370,000 seeds∙ha⁻¹ in May to early June of each year.

Herbicide treatments were applied using a CO₂-pressurized backpack sprayer calibrated to deliver 200 L∙ha⁻¹ aqueous solution at 240 kPa. The boom was 1.5 m wide with four ULD120-02 nozzles (Hypro, New Brighton , MN , USA ) spaced 0.5 m apart. The herbicides were applied postemergence when weeds were approximately 10 cm in height which corresponded to the V2-4 stage for corn and V2-3 stage for soybean.

Weed control was visually estimated on a scale of 0 (no control) to 100% (complete control) at 1, 2, 3, 4 and 8 weeks after herbicide application (WAT). Weed density (soybean only) and dry weight (soybean only) by species were evaluated 4 WAT by counting and cutting plants at the soil surface form 1 square meter in each plot. Plants were dried at 60 C to constant moisture and then weighed. Corn or soybean was harvested at maturity with a small plot combine, weight and moisture recorded and yields were adjusted to 15.5% and 13% seed moisture content for corn and soybean, respectively.

Data were analyzed using PROC GLIMMIX in Statistical Analysis Systems Software

Table 1 Percent visible control of velvetleaf 1, 2, 3, 4 and 8 WAT in corn with various rates of glyphosate alone or with AMS or additional glyphosate equivalent to the cost of the AMS at Ridgetown ON (2014-2015)a

				Control
Treatment	Rate	1 WAT	2 WAT	3 WAT	4 WAT	8 WAT
	g∙ae∙ha⁻¹			%
Weedy check		0	0	0	0	0
Weed-free check		100 a	100 a	100	100	100

Glyphosate	450	90 d	97 c	98	98	98
Glyphosate + AMS	450 + 2.5 L∙ha⁻¹	93 cd	98 bc	99	98	98
Glyphosate	956	97 bcd	99 ab	99	100	100

Glyphosate	675	96 bcd	99 bc	99	98	99
Glyphosate + AMS	675 + 2.5 L∙ha⁻¹	98 abc	99 ab	99	98	98
Glyphosate	1181	99 ab	100 a	99	100	100

Glyphosate	900	98 abc	100 a	99	100	100
Glyphosate + AMS	900 + 2.5 L∙ha⁻¹	99 ab	100 a	99	98	98
Glyphosate	1406	99 ab	100 a	99	99	99

^aAbbreviations: AMS, ammonium sulfate; WAT, weeks after herbicide application. Means followed by the same letter within a column are not significantly different according to Fisher’s Protected LSD at P < 0.05.

Table 2 Percent visible control of common ragweed 1, 2, 3, 4 and 8 WAT in corn with various rates of glyphosate alone or with AMS or additional glyphosate equivalent to the cost of the AMS at Ridgetown ON (2014-2015)a

				Control
Treatment	Rate	1 WAT	2 WAT	3 WAT	4 WAT	8 WAT
	g∙ae∙ha⁻¹			%
Weedy check		0	0	0	0	0
Weed-free check		100 a	100	100 a	100 a	100 a

Glyphosate	450	95 c	97	94 c	80 b	85 b
Glyphosate + AMS	450 + 2.5 L∙ha⁻¹	96 c	92	94 c	81 b	85 b
Glyphosate	956	98 b	98	97 b	84 b	91 b

Glyphosate	675	99 ab	98	97 b	85 b	89 b
Glyphosate + AMS	675 + 2.5 L∙ha⁻¹	98 b	97	96 bc	86 b	90 b
Glyphosate	1181	99 ab	99	97 b	89 b	93 b

Glyphosate	900	99 ab	99	99 ab	86 b	92 b
Glyphosate + AMS	900 + 2.5 L∙ha⁻¹	99 ab	99	97 b	87 b	93 b
Glyphosate	1406	99 ab	99	98 ab	89 b	93 b

Table 3 Percent visible control of lambsquarters 1, 2, 3, 4 and 8 WAT in corn with various rates of glyphosate alone or with AMS or additional glyphosate equivalent to the cost of the AMS at Ridgetown and Harrow, ON (2014-2015)a

				Control
Treatment	Rate	1 WAT	2 WAT	3 WAT	4 WAT	8 WAT
	g∙ae∙ha⁻¹			%
Weedy check		0	0	0	0	0
Weed-free check		100	100 a	100 a	100	100

Glyphosate	450	99	99 b	98 b	91	94
Glyphosate + AMS	450 + 2.5 L∙ha⁻¹	99	99 b	98 b	91	94
Glyphosate	956	100	99 b	98 b	93	95

Glyphosate	675	100	99 b	99 b	93	94
Glyphosate + AMS	675 + 2.5 L∙ha⁻¹	99	99 b	99 b	94	96
Glyphosate	1181	100	99 b	99 b	95	96

Glyphosate	900	100	100 a	99 b	94	96
Glyphosate + AMS	900 + 2.5 L∙ha⁻¹	100	100 a	99 b	94	96
Glyphosate	1406	100	100 a	99 b	95	97

Table 4 Percent visible control of Eastern black nightshade 1, 2, 3, 4 and 8 WAT in corn with various rates of glyphosate alone or with AMS or additional glyphosate equivalent to the cost of the AMS at Ridgetown and Harrow, ON (2014-2015)a

				Control
Treatment	Rate	1 WAT	2 WAT	3 WAT	4 WAT	8 WAT
	g∙ae∙ha⁻¹			%
Weedy check		0	0	0	0	0
Weed-free check		100	100	100	100	100

Glyphosate	450	100	100	99	85	83
Glyphosate + AMS	450 + 2.5 L∙ha⁻¹	100	100	99	83	81
Glyphosate	956	100	100	99	88	83

Glyphosate	675	100	100	99	88	82
Glyphosate + AMS	675 + 2.5 L∙ha⁻¹	100	100	99	88	84
Glyphosate	1181	100	100	99	92	88

Glyphosate	900	100	100	99	89	83
Glyphosate + AMS	900 + 2.5 L∙ha⁻¹	100	100	99	89	85
Glyphosate	1406	100	100	100	90	88

Table 5 Corn yield and percent visible control of barnyardgrass 1, 2, 3, 4 and 8 WAT in corn with various rates of glyphosate alone or with AMS or additional glyphosate equivalent to the cost of the AMS at Ridgetown and Harrow, ON (2014-2015)a

				Control
Treatment	Rate	1 WAT	2 WAT	3 WAT	4 WAT	8 WAT	Yield
	g∙ae∙ha⁻¹			%			T/ha
Weedy check		0	0	0	0	0	10.62 b
Weed-free check		100 a	100	100	100 a	100 a	14.64 a

Glyphosate	450	97 b	97	97	73 b	85 b	13.87 a
Glyphosate + AMS	450 + 2.5 L∙ha⁻¹	97 b	98	98	70 b	76 b	13.98 a
Glyphosate	956	100 a	100	98	77 b	86 b	14.06 a

Glyphosate	675	99 ab	99	99	75 b	84 b	13.82 a
Glyphosate + AMS	675 + 2.5 L∙ha⁻¹	98 b	99	98	79 b	79 b	13.99 a
Glyphosate	1181	100 a	99	98	81 b	85 b	14.15 a

Glyphosate	900	100 a	99	99	80 b	89 b	14.06 a
Glyphosate + AMS	900 + 2.5 L∙ha⁻¹	100 a	100	99	82 b	90 b	14.19 a
Glyphosate	1406	100 a	100	99	82 b	83 b	14.07 a

Table 6 Percent visible control of common ragweed 1, 2, 3, 4 and 8 WAT in soybean with various rates of glyphosate alone or with AMS or additional glyphosate equivalent to the cost of the AMS at Ridgetown, Exeter and Harrow ON (2014-2015)a

				Control
Treatment	Rate	1 WAT	2 WAT	3 WAT	4 WAT	8 WAT	Density	Dry weight
	g∙ae∙ha⁻¹			%			#/m²	g/m²
Weedy check		0	0	0	0	0	4.7 c	11.1 b
Weed-free check		100 a	100 a	100 a	100 a	100 a	0	0

Glyphosate	450	37 d	68 f	84 e	88 e	89 d	2.0 b	0.9 a
Glyphosate + AMS	450 + 2.5 L∙ha⁻¹	42 d	74 ef	88 de	91 de	93 c	1.5 ab	0.8 a
Glyphosate	956	60 bc	86 bcd	93 bcd	96 bcd	97 b	1.4 ab	0.5 a

Glyphosate	675	58 c	79 de	91 cd	93 cd	92 cd	1.8 b	0.9 a
Glyphosate + AMS	675 + 2.5 L∙ha⁻¹	67 bc	84 cd	92 bcd	95 bcd	96 bc	0.9 ab	0.3 a
Glyphosate	1181	68 bc	94 ab	96 bc	98 b	98 b	0.6 a	0.2 a

Glyphosate	900	65 bc	90 bc	95 bc	96 bc	97 b	0.6 a	0.3 a
Glyphosate + AMS	900 + 2.5 L∙ha⁻¹	71 bc	90 bc	96 bc	97 bc	98 b	0.9 ab	0.3 a
Glyphosate	1406	73 b	95 ab	97 b	98 b	98 b	0.7 a	0.1 a

Table 7 Percent visible control of lambsquarters 1, 2, 3, 4 and 8 WAT in soybean with various rates of glyphosate alone or with AMS or additional glyphosate equivalent to the cost of the AMS at Ridgetown, Exeter and Harrow ON (2014-2015)a

				Control
Treatment	Rate	1 WAT	2 WAT	3 WAT	4 WAT	8 WAT	Density	Dry weight
	g∙ae∙ha⁻¹			%			#/m²	g/m²
Weedy check		0	0	0	0	0	25.0 c	9.1 b
Weed-free check		100 a	100	100 a	100 a	100 a	0	0.0

Glyphosate	450	39 d	87	96 c	98 b	98 b	3.5 ab	0.4 a
Glyphosate + AMS	450 + 2.5 L∙ha⁻¹	46 cd	91	98 bc	99 ab	98 b	3.5 ab	0.5 a
Glyphosate	956	62 bc	96	99 ab	99 ab	99 ab	1.3 a	0.0 a

Glyphosate	675	48 cd	91	98 bc	99 ab	99 ab	4.9 b	0.3 a
Glyphosate + AMS	675 + 2.5 L∙ha⁻¹	57 cd	95	99 ab	98 b	99 ab	2.8 ab	0.2 a
Glyphosate	1181	64 bc	98	99 ab	100 a	99 ab	2.1 ab	0.1 a

Glyphosate	900	52 cd	97	99 ab	99 ab	100 a	1.9 ab	0.2 a
Glyphosate + AMS	900 + 2.5 L∙ha⁻¹	57 cd	98	99 ab	99 ab	99 ab	1.9 ab	0.0 a
Glyphosate	1406	82 ab	100	100 a	100 a	99 ab	1.2 a	0.0 a

Table 8 Percent visible control of barnyardgrass 1, 2, 3, 4 and 8 WAT in soybean with various rates of glyphosate alone or with AMS or additional glyphosate equivalent to the cost of the AMS at Ridgetown, Exeter and Harrow ON (2014-2015)a

				Control
Treatment	Rate	1 WAT	2 WAT	3 WAT	4 WAT	8 WAT	Density	Dry weight
	g∙ae∙ha⁻¹			%			#/m²	g/m²
Weedy check		0	0	0	0	0	11.1 c	11.3 b
Weed-free check		100 a	100 a	100 a	100 a	100 a	0	0

Glyphosate	450	90 c	98 c	97 c	97 c	96 c	3.5 b	0.7 a
Glyphosate + AMS	450 + 2.5 L∙ha⁻¹	94 bc	99 b	99 b	99 b	98 bc	2.6 ab	0.5 a
Glyphosate	956	95 b	100 a	99 b	100 a	98 bc	2.3 ab	0.4 a

Glyphosate	675	95 b	100 a	99 b	99 b	97 cd	2.3 ab	0.3 a
Glyphosate + AMS	675 + 2.5 L∙ha⁻¹	97 b	100 a	99 b	99 b	99 b	1.5 ab	0.1 a
Glyphosate	1181	95 b	100 a	99 b	99 b	99 b	1.0 ab	0.0 a

Glyphosate	900	97 b	100 a	99 b	100 a	99 b	0.8 a	0.1 a
Glyphosate + AMS	900 + 2.5 L∙ha⁻¹	96 b	100 a	99 b	99 b	99 b	1.4 ab	0.2 a
Glyphosate	1406	97 b	100 a	100 a	99 b	98 bc	2.1 ab	0.3 a

Table 9 Corn yield and percent visible control of green foxtail 1, 2, 3, 4 and 8 WAT in soybean with various rates of glyphosate alone or with AMS or additional glyphosate equivalent to the cost of the AMS at Ridgetown and Exeter ON (2014-2015)a

				Control
Treatment	Rate	1 WAT	2 WAT	3 WAT	4 WAT	8 WAT	Density	Dry weight	Yield
	g∙ae∙ha⁻¹			%			#/m²	g/m²	T/ha
Weedy check		0	0	0	0	0	64.7 b	24.5 b	2.04 b
Weed-free check		100 a	100 a	100	100 a	100 a	0	0	3.40 a

Glyphosate	450	91 d	99 b	100	99 b	98 b	0.9 a	0.2 a	3.23 a
Glyphosate + AMS	450 + 2.5 L∙ha⁻¹	95 c	100 a	100	99 b	99 b	0.4 a	0.1 a	3.27 a
Glyphosate	956	96 bc	100 a	100	99 b	99 b	0.3 a	0.0 a	3.34 a

Glyphosate	675	96 bc	100 a	100	99 b	98 b	0.6 a	0.1 a	3.29 a
Glyphosate + AMS	675 + 2.5 L∙ha⁻¹	97 bc	100 a	100	99 b	99 b	0.5 a	0.0 a	3.41 a
Glyphosate	1181	97 bc	100 a	100	99 b	98 b	0.6 a	0.0 a	3.42 a

Glyphosate	900	97 bc	100 a	100	99 b	99 b	0.3 a	0.0 a	3.36 a
Glyphosate + AMS	900 + 2.5 L∙ha⁻¹	97 bc	100 a	100	99 b	99 b	0.5 a	0.0 a	3.44 a
Glyphosate	1406	98 b	100 a	100	99 b	98 b	0.4 a	0.0 a	3.46 a

(SAS) [8] . Herbicide treatment was considered a fixed effect, while random effects included environment (year-location combinations), environment by herbicide treatment interaction, and replicate nested within environment. Significance of the fixed effect was tested using the F-test and random effects were tested using a likelihood ratio. Residual plots were used to check that variances were randomly distributed, independent and homogeneous. The Laplace method was used for estimation method; weed control and yield were analyzed using a normal distribution and identity link and weed density and dry weight were analyzed using a lognormal distribution and identity link. Data were square root or arcsine square root transformed prior to analysis when necessary. Treatment comparisons were made using Fisher’s Protected LSD at P < 0.05. Data compared on the transformed scale were converted back to the original scale for presentation of results.

3. Results and Discussion

Data were pooled and averaged over years and locations when there was no statistically significant interaction between year, location and treatments (Tables 1-9). Weeds were included when present in 3 or more trials.

3.1. Corn Trials

There was no observable corn injury for any of the treatments tested (data not shown). For corn trials the predominant weed species included velvetleaf, common ragweed, common lambsquarters, Eastern black nightshade and barnyardgrass.

Glyphosate applied at 450, 675 and 900 g∙ae∙ha⁻¹ controlled velvetleaf 90% - 98%, 96% - 99% and 98% - 100%, respectively (Table 1). Generally, the addition of AMS (2.5 L∙ha⁻¹) or glyphosate (406 g∙ae∙ha⁻¹, same dollar value as AMS) to glyphosate at 450, 675 and 900 g∙ae∙ha⁻¹ did not result in increased velvetleaf control at 1, 2, 3, 4 and 8 WAT. There were two exceptions, at 2 WAT, velvetleaf control was improved with the addition of glyphosate (406 g∙ae∙ha⁻¹) to glyphosate at 450 and 675 g∙ae∙ha⁻¹ (Table 1).

Glyphosate applied at 450, 675 and 900 g∙ae∙ha⁻¹ controlled common ragweed 80% - 97%, 85% - 99% and 86% - 99%, respectively (Table 2). The addition of AMS (2.5 L∙ha⁻¹) to glyphosate (at 450, 675 and 900 g∙ae∙ha⁻¹) did not provide any added benefit in controlling common ragweed at 1, 2, 3, 4 and 8 WAT (Table 2). The addition of glyphosate (406 g∙ae∙ha⁻¹, same dollar value as AMS) to glyphosate at 450 g∙ae∙ha⁻¹ improved the control of common ragweed at 1 and 3 WAT (Table 2).

Glyphosate applied at 450, 675 and 900 g∙ae∙ha⁻¹ controlled common lambsquarters 91% - 99%, 93% - 100% and 94% - 100%, respectively (Table 3). The addition of AMS (2.5 L∙ha⁻¹) or glyphosate (406 g∙ae∙ha⁻¹, same dollar value as AMS) to glyphosate (at 450, 675 and 900 g∙ae∙ha⁻¹) did not improve control of common lambsquarters at 1, 2, 3, 4 and 8 WAT (Table 3).

Glyphosate applied at 450, 675 and 900 g∙ae∙ha⁻¹ controlled Eastern black nightshade 82% - 100% (Table 4). There was no improvement in the control of Eastern black nightshade control with the addition of AMS (2.5 L∙ha⁻¹) or glyphosate (406 g∙ae∙ha⁻¹, same dollar value as AMS) to glyphosate at 450, 675 and 900 g∙ae∙ha⁻¹ (Table 4).

Glyphosate applied at 450, 675, 900 g∙ae∙ha⁻¹ controlled barnyardgrass 73% - 97%, 75% - 99% and 80% - 100%, respectively (Table 5). Generally, the addition of AMS (2.5 L∙ha⁻¹) or glyphosate (406 g∙ae∙ha⁻¹, same dollar value as AMS) to glyphosate at 450, 675 and 900 g∙ae∙ha⁻¹ did not result in increased barnyardgrass control at 1, 2, 3, 4 and 8 WAT. There were two exceptions, at 1 WAT, barnyardgrass control was improved with the addition of glyphosate (406 g∙ae∙ha⁻¹) to glyphosate at 450 g∙ae∙ha⁻¹ and barnyardgrass control was greater with glyphosate at 1181 g∙ae∙ha⁻¹ compared to glyphosate (675 g∙ae∙ha⁻¹) plus AMS (2.5 L∙ha⁻¹) (Table 5).

Reduced weed interference with glyphosate applied at 450, 675, 900 g∙ae∙ha⁻¹ resulted in corn yields that were equivalent to the weed-free check (Table 5). The addition of AMS (2.5 L∙ha⁻¹) or glyphosate (406 g∙ae∙ha⁻¹, same dollar value as AMS) to glyphosate (450, 675 and 900 g∙ae∙ha⁻¹) did not result in increased corn yield (Table 5).

Results are similar to other studies that have shown no improvement in control of velvetleaf, redroot pigweed, common lambsquarters and annual grasses when AMS was added to glyphosate [9] . However, Pratt et al. [5] reported greater control of velvetleaf when AMS was added to glyphosate compared to glyphosate alone. Nurse et al. (2008) and Young et al. [10] have reported that velvetleaf control is enhanced with the addition of AMS to glyphosate. Nurse et al. [7] and Young et al. [10] found that the control of other weed species such as common lambsquarters does not always improve with the addition of AMS to glyphosate. It should be noted that all of these studies only reported a benefit of the addition of AMS to glyphosate at glyphosate doses <450 g∙ae∙ha⁻¹, which is half the labeled dose in Ontario.

3.2. Soybean Trials

There was no observable soybean injury for any of the treatments tested (data not shown). For soybean trials the predominant weed species included common ragweed, common lambsquarters, barnyardgrass and green foxtail.

Glyphosate applied at 450, 675 and 900 g∙ae∙ha⁻¹ controlled common ragweed 37% - 89%, 58% - 93% and 65% - 97%, respectively (Table 6). Generally, the addition of AMS (2.5 L∙ha⁻¹) to glyphosate (450, 675 and 900 g∙ae∙ha⁻¹) did not result in an increase in common ragweed control at 1, 2, 3, 4 and 8 WAT in soybean, with one exception, at 8 WAT, common ragweed control was improved with the addition of AMS (2.5 L∙ha⁻¹) to glyphosate at 450 g∙ae∙ha⁻¹ (Table 6). Conversely, at 1, 2, 3, 4 and 8 WAT the addition of glyphosate (406 g∙ae∙ha⁻¹) to glyphosate at 450 g∙ae∙ha⁻¹ consistently resulted in improved control of common ragweed. Similarly, at 2, 4 and 8 WAT the addition of glyphosate (406 g∙ae∙ha⁻¹) to glyphosate at 675 g∙ae∙ha⁻¹ resulted in improved control of common ragweed. There was no decrease in common ragweed density and dry weight with the addition of AMS (2.5 L∙ha⁻¹) or additional glyphosate (406 g∙ae∙ha⁻¹) to glyphosate at 450, 675 and 900 g∙ae∙ha⁻¹ (Table 6).

Glyphosate applied at 450, 675 and 900 g∙ae∙ha⁻¹ controlled common lambsquarters 39% - 98%, 48% - 99% and 52% - 100%, respectively (Table 7). The addition of AMS (2.5 L∙ha⁻¹) to glyphosate (at 450, 675 and 900 g∙ae∙ha⁻¹) did not improve control of common lambsquarters at 1, 2, 3, 4 and 8 WAT. At 1 and 3 WAT the addition of glyphosate (406 g∙ae∙ha⁻¹) to glyphosate at 450 g∙ae∙ha⁻¹ resulted in improved control of lambsquarters. Lambsquarters control was greater with glyphosate at 1181 g∙ae∙ha⁻¹ compared to glyphosate (675 g∙ae∙ha⁻¹) plus AMS at 2.5 L∙ha⁻¹ (Table 7). The addition of AMS or glyphosate (406 g∙ae∙ha⁻¹, same dollar value as AMS) to glyphosate (450, 675 and 900 g∙ae∙ha⁻¹) did not or decrease common lambsquarters density and dry weight (Table 7).

Glyphosate applied at 450, 675 and 900 g∙ae∙ha⁻¹ controlled barnyardgrass 90% - 98%, 95% - 100% and 97% - 100%, respectively (Table 8). At 2, 3 and 4 WAT, the addition of AMS (2.5 L∙ha⁻¹) to glyphosate 450 g∙ae∙ha⁻¹ improved the control of barnyardgrass; at 8 WAT, the addition of AMS (2.5 L∙ha⁻¹) to glyphosate 675 g∙ae∙ha⁻¹ improved the control of barnyardgrass; and at 4 WAT, the addition of AMS (2.5 L∙ha⁻¹) to glyphosate 900 g∙ae∙ha⁻¹ decreased control of barnyardgrass but there was no decrease in barnyardgrass density or dry weight (Table 8). At 1, 2, 3 and 4 WAT, the addition of additional glyphosate (406 g∙ae∙ha⁻¹, same dollar value as AMS) to glyphosate 450 g∙ae∙ha⁻¹ improved the control of barnyardgrass; at 8 WAT, the addition of additional glyphosate (406 g∙ae∙ha⁻¹, same dollar value as AMS) to glyphosate 675 g∙ae∙ha⁻¹ improved the control of barnyardgrass; and at 3 WAT, the addition of additional glyphosate (406 g∙ae∙ha⁻¹, same dollar value as AMS) to glyphosate 900 g∙ae∙ha⁻¹ improved the control of barnyardgrass but there was no decrease in barnyardgrass density or dry weight (Table 8). Interestingly the addition of AMS (2.5 L∙ha⁻¹) and additional glyphosate to glyphosate 900 g∙ae∙ha⁻¹ reduced barnyardgrass control at 4 WAT. No explanation is provided for this observation and the difference in all likelihood can be attributed to experimental variation.

Glyphosate applied at 450, 675 and 900 g∙ae∙ha⁻¹ controlled green foxtail 91% - 100%, 96% - 100% and 97% - 100%, respectively (Table 9). At 1 and 2 WAT, the addition AMS (2.5 L∙ha⁻¹) or additional glyphosate (406 g∙ae∙ha⁻¹) to glyphosate (450 g∙ae∙ha⁻¹) improved the control of green foxtail. There was no improvement in green foxtail control when AMS (2.5 L∙ha⁻¹) or additional glyphosate (406 g∙ae∙ha⁻¹) was added to glyphosate at 675 and 900 g∙ae∙ha⁻¹ and no decrease in green foxtail density and dry weight (Table 9).

Reduced weed interference with glyphosate applied at 450, 675 and 900 g∙ae∙ha⁻¹ resulted in soybean yields that were equivalent to the weed-free check (Table 9). The addition of AMS (2.5 L∙ha⁻¹) or additional glyphosate (406 g∙ae∙ha⁻¹, same dollar value as AMS) to glyphosate at 450, 675 and 900 g∙ae∙ha⁻¹ did not result in increased soybean yield (Table 9). In other studies, Nurse et al. [7] and Soltani et al. [9] also reported no difference in yield when AMS was added to a full labeled rate of glyphosate (900 g∙ae∙ha⁻¹).

4. Conclusion

The addition of AMS or an equal dollar value of glyphosate to glyphosate applied at 450, 675 or 900 g∙ae∙ha⁻¹ provided no consistent benefit for the control of velvetleaf, common ragweed, common lambsquarters, Eastern black nightshade and barnyard- grass in corn and common ragweed, common lambsquarters, barnyardgrass and green foxtail in soybean. There was no difference in corn or soybean yield among the herbicide treatments evaluated. The similar levels of weed control provided by the herbicide treatments evaluated provide a plausible reason for there being no effect of adding AMS or additional glyphosate to glyphosate on corn or soybean yield. Based on these results, the addition of AMS to glyphosate at the full label rate had little benefit on weed control efficacy and corn and soybean yield under Ontario environmental conditions.

Acknowledgements

The authors acknowledge Todd Cowan, Lynette Brown and Elaine Lepp for their expertise and technical assistance in these studies. This research was funded in part by the Grain Farmers of Ontario (GFO) and the GF2 program of the Agricultural Adaptation Council.

Cite this paper

Soltani, N., Nurse, R.E., Shropshire, C. and Sikkema, P.H. (2016) Benefit of Adding Ammonium Sulfate or Ad- ditional Glyphosate to Glyphosate in Corn and Soybean. Agricultural Sciences, 7, 759- 770. http://dx.doi.org/10.4236/as.2016.710070

References1

Kulasekera, B. (2015) Estimated Area, Yield, Production and Farm Value of Specified Field Crops, Ontario, 2011-2015 (Imperial and Metric Units), 2011-2015, (Metric Units). http://www.omafra.gov.on.ca/english/stats/crops/estimate_new.htm

Beckie, H.J., Sikkema, P.H., Soltani, N., Blackshaw, R.E. and Johnson, E.N. (2014) Environmental Impact of Glyphosate-Resistant Weeds in Canada. Weed Science, 62, 385-392. http://dx.doi.org/10.1614/WS-D-13-00093.1

Sikkema, P.H. and Soltani, N. (2007) Herbicide-Resistant Crops in Eastern Canada. In: Gulden, R.H. and Swanton, C.J., Eds., The First Decade of Herbicide-Resistant Crops in Canada, Vol. 4, Canadian Weed Science Society—Societe Canadienne de malherbologie, Sainte Anne de Bellevue, 3-13.

Beckie, H.J., Harker, K.N., Hall, L.M., Warwick, S.I., Legere, A., Sikkema, P.H., Clayton, G.W., Thomas, A.G., Leeson, J.Y., Sequin-Swartz, G. and Simard, M.J. (2006) A Decade of Herbicide-Resistant Crops in Canada. Canadian Journal of Plant Science, 86, 1243-1264. http://dx.doi.org/10.4141/P05-193

Pratt, D., Kells, J.J. and Penner, D. (2003) Substitutes for Ammonium Sulfate as Additives with Glyphosate and Glufosinate. Weed Technology, 17, 576-581. http://dx.doi.org/10.1614/0890-037X(2003)017[0576:SFASAA]2.0.CO;2

Thelen, K.D., Jackson, E.P. and Penner, D. (1995) The Basis for the Hard-Water Antagonism of Glyphosate Activity. Weed Science, 43, 541-548.

Nurse, R.E., Hamill, A.S., Kells, J.J. and Sikkema, P.H. (2008) Annual Weed Control May Be Improved When AMS Is Added to Below-Label Glyphosate Doses in Glyphosate-Tolerant Maize (Zea mays L.). Crop Protection, 27, 452-458. http://dx.doi.org/10.1016/j.cropro.2007.07.015

Statistical Analysis Systems (2008) The SAS System. Version 9.2, Statistical Analysis Systems Institute, Cary.

Soltani, N., Nurse, R.E., Robinson, R.E. and Sikkema, P.H. (2011) Effect of Ammonium Sulfate and Water Hardness on Glyphosate and Glufosinate Activity in Corn. Canadian Journal of Plant Science, 91, 1053-1059. http://dx.doi.org/10.4141/cjps2011-047

Young, B.G., Knepp, A.W., Wax, L.M. and Hart, S.E. (2003) Glyphosate Translocation in Common Lambsquarters (Chenopodium album) and Velvetleaf (Abutilon theophrasti) in Response to Ammonium Sulfate. Weed Science, 51, 151-156. http://dx.doi.org/10.1614/0043-1745(2003)051[0151:GTICLC]2.0.CO;2