A thin plate is a three dimensional body, a dimension of which (the thickness) is smaller than the other dimensions. Usually, under the assumption of small thickness with respect to the characteristic length of the middle plane, instead of a three-dimensional description, a bi-dimensional one is used. The problem is then posed over the middle plane of the plate. In this way, the numerical methods are less expensive in time and in memory.

In this paper, we deal with the modelling of the thermal behavior of a thin laminated plate. The thermal conductivity can be considered as an exemplary problem similar to the elasticity problem. Instead of displacement, the unknown is the temperature, but the equations are similar.

The temperature and thermal flux established by the asymptotic expansion are good approximations. But close to the lateral surface, the bi-dimensional behavior is not suited: for a laminated body, boundary conditions are only satisfied on average. However, on the edge damage phenomena can appear, like delamination, crack... A bi-dimensional description of the behavior of the plate is not enough. In order to predict these phenomena, we need a good, local description of the behavior of the plate, in these areas. In this case, the bi-dimensional expansion is no more sufficient, we need a local three-dimensional description, which is valid only close to the lateral surface. Moreover, the distance to the edge and the position in the thickness have the same range of magnitude; the assumption of small thickness with respect to the other directions is no more valid. Close to the edge, the body must be considered like a threedimensional domain, with thickness and distance to the edge of the same order.

In previous works, the cases of a classical regular edge [1] and edge with a local perturbation [2] were considered. Recently, Saidi et al. [3,4] studied singularities in the edge of moderately thick plates. They studied the effect of the boundary layer term added to the Mindlin’s plate theory. In this paper, the case of thin laminated plate with an angle in the lateral edge is considered. We lose the symmetry of the local perturbation [2] and new arguments must be used. Because of this angle, the boundary of the plate cannot be considered as a smooth surface. The boundary layer theory must be adapted to take into account the new geometry of the perturbed edge. Therefore, we obtain a new local description which is posed on an unbounded domain. The existence and uniqueness of the solution must be proved in order to implement a numerical method of resolution.

As it was seen in subsection 2.2, the corrective term allows to improve the description of the thermal flux close to a regular edge of the plate. In the same way, the behavior of the plate close to an angle, can be given by an asymptotic expansion with a new corrective term, a new boundary layer term.

Now, the boundary of the plate is not regular, it admits a perturbation. Close to the origin, the edge forms an angle of magnitude (cf.Figure 4). The middle plane of the plate is no more regular. The lateral edge can be split into two parts: and.

Figure 4 The perturbation of the edge In order to lighten the notations, we shall assume that vanishes in the vicinity of the origin.

The edge is assumed to be regular everywhere but not in the vicinity of the origin.

Far from the origin, but on the lateral edge, the boundary layer problems are similar to those described in section 2, corresponding to a classical, regular surface.

Let denotes the corrective term on far from the origin. In the same way, let denotes the corrective term on far from the origin. These functions, , are solutions of the variational problem (2.12) with unknown instead of.

We can also prove that they are solutions of

where is defined in (2.11).

Close to the origin, a corrective term, is added to in the asymptotic expansion (2.7). It depends on the three space components. It is defined in an unbounded domain which is the dilatation of the origin. As a matter of fact, close to the origin, all directions (the position in the thickness and the distance to the origin) have the same range of order. Because of the geometry of the domain, it will be useful to introduce the cylindric coordinates to describe the domain:

.

The asymptotic expansion of the temperature is now

where the unknown is.

When, the boundary condition (2.3) must be exactly satisfied at the corresponding order. When becomes great, the corrective term must tend to the classical boundary layer term. We shall gather and into a unique function defined by

Remark 2. For small values of and great values of, it means far from the lateral edge, the influence of each corrective term is very small because of the exponentially decreasing. So that they can be neglected.

We can then see that, because is unbounded, and because the corrective term must tend to when becomes great, it cannot belong to We shall transform the corrective term in order to obtain an unknown which belongs to. Let us define:

where the new unknown is now.

The function, which is, is a cut off function such that for little is equal to 0 and for great value of is equal to 1 (cf. Figure 5).

insert figure 5 The cutoff function

The problem for is now:

Equation (3.7) is the equilibrium equation, (3.8) is the boundary condition on and, (3.11) and (3.12) are the continuity conditions across the interfaces, (3.9) is the boundary condition on the lateral edge, and (3.10) means that the corrective term is inefficient far from the origin.

Remark 3. When is sufficiently great, is equal to 1 and the right-hand sides of (3.7), (3.8), (3.9) and (3.12) vanish.

Problem (3.7)-(3.12) is equivalent to the following variational problem:

With

Where is the completed space of for the norm associated with

Lemma 1. The right-hand side of (3.13) is a functional over.

Proof. is defined over a space of equivalent classes. Two elements of a same class differ by a constant. It follows that is a functional over if two elements of a same class take the same value by, or if, for any constant,. Using the first expression of in (3.14), we get

by virtue of (2.9) and the assumption on.

Lemma 2. The functional is bounded over. It means that there exists a constant such that for all,.

Proof. Let be any element of, using the second expression of in (3.14)

By virtue of remark 3 each integral can be applied on a bounded domain which does not depend on. As a consequence, can be read

where the upper-script means that the domain is bounded. Using the Cauchy-Schwarz inequality,

Using the trace theorem and because is a bounded domain, we get

Passing to the quotient space

but

Because of the density of into, Equation (3.13) is valid in the whole. It follows from the Lax-Milgram theorem, lemma 2 that Theorem. The corrective term is uniquely defined over.

In order to improve the description of the behavior of the plate close to the singularity, a boundary layer term was added. This term is solution of (3.7)-(2.12). It has no influence far from the edge but it is defined over an unbounded domain.

At first, the equivalent variational problem was found. Then, the previous theorem allows us to prove the existence and the uniqueness of the solution. In this way the numerical resolution can be implement.