A field experiment was conducted in order to evaluate the economics of different genotypes of cotton planted under various planting densities at Agronomic Research Area, University of Agriculture Faisalabad during the summer season in 2013. Sowing was done manually with the help of dibbling method on both sides of the bed in standing water, with bed distance of 75 cm. The crop was sown in May and the experiment comprised of following FH-142, FH-114 at various densities (S1 = 10 cm, S2 = 15 cm, S3 =20 cm, S4 = 25 cm, S5 = 30 cm). Data regarding net field benefit, benefit cost ratio, dominance analysis, and marginal rate of return were collected. The experimental results showed that maximum NFB of (Rs. 222,575), (Rs. 202,483) was achieved in FH-142 and FH-114 when planted at a plant spacing of 20 cm and 15 cm respectively. While the maximum benefit cost ratio (BCR) of 1.76 was found in genotype FH-142 at plant spacing of 20 and 25 cm and FH-114 depicted maximum BCR of 1.62 and 1.61 when planted at plant spacing of 15 and 20 cm, respectively. Dominance analysis of FH-142 planted at 10 and 15 cm while FH-114 at plant spacing of 10, 15 and 20 cm was dominated due to their lower net field benefits as compared to other treatments, while maximum marginal rate of return (1494%, 788%) by planting FH-142, FH-114 was obtained at 30 cm and 25 cm recorded respectively.
Cotton being an important cash crop of Pakistan contributes about 60% in the foreign exchange by export of various value added products (Iqbal et al., 2003) [
Cotton crop is being influenced by various environmental factors. Optimum planting density can contribute in achieving maximum yield of cotton and it varies widely according to cropping system, environmental conditions and cultivars (Halemani and Hallikri, 2002) [
Among the various agronomic factors limiting seed cotton yield, low plant population and use of low potential genotypes are primarily important and thus responsible for low yield of cotton crop in the country. Adequate plant population per unit area of cotton seedlings is crucial to achieve high productivity and yield even at global level. Plant spacing has a key role in influencing the growth and yield characteristics of the crop and contributes 22.0% to 32.7% towards cotton yield (Mushtaq et al., 2010) [
Mostly, farmers maintain plant spacing and population in the field according to their conventional methods of planting instead of variety requirements and it consequently results in yield penalty. Cotton genotypes showed a diverse nature in their architecture that determines the optimum spacing necessary for it to get profitable yield (Ali et al., 2009) [
In Pakistan, the recommended row-to-row distance for cotton crop is 75 cm but plant-to-plant distance varies from 15 to 25 cm with optimum plant population ranging from 60,000 to 75,000 plants∙ha−1.
Shah et al. (2005) [
The studies revealed that growth habit of a crop affects interaction between the plants and consequently needs to be accounted for recommending plant population. Moreover, it becomes imperative to develop such versatile techniques for planting of cotton that ensure efficient nutrient uptake and minimum mutual shading and inter plant competition. To overcome this problem, modern production technology emphasizes the role of proper plant spacing to ensure high productivity of cotton. So, keeping in view the importance of cotton crop the present study was undertaken to examine economics of various cotton genotypes which were planted at various planting densities.
The study was carried out at the Agronomic Research Area, University of Agriculture, Faisalabad, Pakistan (31.25N, 73.09E) during 2013-2014. The experiment was laid out in randomized complete block design (RCBD) under factorial arrangement with three replications. Two factors were studied Factor A = Genotypes V1 = FH-142 (Spreading type) V2 = FH-114 (Erect type) Factor B was Plant to Plant Distance S1 = 10 cm (133,333 plants∙ha−1), S2 = 15 cm (88,888 plants∙ha−1), S3 = 20 cm (66,666 plants∙ha−1), S4 = 25 cm (53,333 plants∙ha−1), S5 = 30 cm (44,444 plants∙ha−1). 25 kg/ha seed was used bed distance was 75 cm. Fertilizers were applied at the rate of 200 and 115 kg∙ha−1∙N and P2O5, respectively. 12 irrigations were given to fulfill requirement of crop. Different pesticides were used and also manually control of weeds was done.
The data collected were analyzed statistically using Fisher’ analysis of variance technique and Least Significant Difference (LSD) test at 5% level of probability was employed to compare the difference among treatments’ means (Steel et al., 1997) [
Farmers are more interested in variability in benefits than yields, therefore net field benefits (NFB) were calculated against the variable costs.
| Treatments | Seed cotton yield (kg∙ha−1) | Gross income (Rs∙ha−1) | Variable cost (Rs∙ha−1) | Total cost (Rs∙ha−1) | Net field benefits (Rs∙ha−1) | Net returns (Rs∙ha−1) | Benefit cost ratio (Rs∙ha−1) | |
|---|---|---|---|---|---|---|---|---|
| V1 = FH-142 | S1: 10 cm × 75 cm | 2170.78 | 162808.5 | 26,625 | 142686.50 | 136183.50 | 20122.00 | 1.14 |
| S2: 15 cm × 75 cm | 2514.45 | 188583.8 | 22,975 | 139036.50 | 165608.75 | 49547.25 | 1.36 | |
| S3: 20 cm × 75 cm | 3288.67 | 246650.3 | 24,075 | 140136.50 | 222575.25 | 106513.75 | 1.76 | |
| S4: 25 cm × 75 cm | 3232.11 | 242408.3 | 22,050 | 138111.50 | 220358.25 | 104296.75 | 1.76 | |
| S5: 30 cm × 75 cm | 2528.11 | 189608.3 | 17,525 | 133586.50 | 172083.25 | 56021.75 | 1.42 | |
| V2 = FH-114 | S1: 10 cm × 75 cm | 2230.19 | 167264.3 | 26,925 | 142986.50 | 140339.25 | 24277.75 | 1.17 |
| S2: 15 cm × 75 cm | 3038.11 | 227858.3 | 25,375 | 141436.50 | 202483.25 | 86421.75 | 1.61 | |
| S3: 20 cm × 75 cm | 2999.67 | 224975.3 | 22,725 | 138786.50 | 202250.25 | 86188.75 | 1.62 | |
| S4: 25 cm × 75 cm | 2188.44 | 164133 | 17,100 | 133161.50 | 147033.00 | 30971.50 | 1.23 | |
| S5: 30 cm × 75 cm | 1874.56 | 140592 | 14,450 | 130511.50 | 126142.00 | 10080.50 | 1.08 | |
Seed cotton rate = 3000 Rs/40 kg; Total fixed cost = Rs. 116061.5.
FH-114 showed maximum NFB of Rs. 202,483 at plant spacing of 15 cm. However, minimum NFB of Rs. 126,142 was obtained in FH-114 at plant to plant distance of 30 cm.
Benefit cost ratio (BCR) is also important to farmers because they are interested in the increase in net returns with given increase in the total cost of production. The maximum benefit cost ratio (BCR) of 1.76 was found in spreading genotype FH-142 at plant spacing of 20 and 25 cm (
As net field benefit (NFB) does not indicate the rate of return in relation to investment, final recommendation for the production technology cannot be specified only on the basis of NFB. Dominance and marginal analysis compares the variable costs with the gross margin, showing the increase in costs required to gain a given increase in gross margin. Treatments were first listed in increasing order of variable costs. Any treatment that had a total gross margin less than (or equal to) those of a treatment with lower total variable costs is dominated. Therefore, dominated treatments have a lower extra gross margin per unit of extra costs than other treatments (CIMMYT, 1988).
Data presented in
Marginal analysis was calculated to check the economic impact of plant to plant spacing on two cotton genotypes. This analysis assists the farmers to get the maximum benefit from the inputs by using the limited resources. Marginal analysis formed the basis of economic reasoning and it showed the effects of a small change in the control variable. As real differences were found in the yield among different treatments, therefore marginal analysis was done.
| Treatments | Cost that vary (PRs∙ha−1) | Net field benefits (PRs∙ha−1) |
|---|---|---|
| V2S5: 30 cm × 75 cm | 14,450 | 126,142 |
| V2S4: 25 cm × 75 cm | 17,100 | 147,033 |
| V1S5: 30 cm × 75 cm | 17,525 | 172,083 |
| V1S4: 25 cm × 75 cm | 22,050 | 220,358 |
| V2S3: 20 cm × 75 cm | 22,725 | 202,250 D |
| V1S2: 15 cm × 75 cm | 22,975 | 165,609 D |
| V1S3: 20 cm × 75 cm | 24,075 | 222,575 |
| V2S2: 15 cm × 75 cm | 25,375 | 202,483 D |
| V1S1: 10 cm × 75 cm | 26,625 | 136,183 D |
| V2S1: 10 cm × 75 cm | 26,925 | 140,339 D |
D = Dominated.
| Treatments | Cost that vary (PRs∙ha−1) | Marginal cost that vary (PRs∙ha−1) | Net field benefits (PRs∙ha−1) | Marginal net benefits (PRs∙ha−1) | Marginal rate of return (%) |
|---|---|---|---|---|---|
| V2S5: 30 cm × 75 cm | 14,450 | - | 126,142 | - | - |
| V2S4: 25 cm × 75 cm | 17,100 | 2650 | 147,033 | 20,891 | 788 |
| V1S5: 30 cm × 75 cm | 17,525 | 3075 | 172,083 | 45,941 | 1494 |
| V1S4: 25 cm × 75 cm | 22,050 | 7600 | 220,358 | 94,216 | 1240 |
| V1S3: 20 cm × 75 cm | 24,075 | 9625 | 222,575 | 96,433 | 1002 |
V1 = FH-142; V2 = FH-114.
It is evident from the results that farmers with poor resources can accomplish maximum benefits by planting FH-142 at plant spacing of 30 cm and FH-114 at 25 cm, respectively. Farmers with better resources can move towards planting cotton at plant to plant distance of 20 and 25 cm in case of FH-142 and 30 cm for FH-114, respectively.
Spreading genotype FH-142 gave higher benefit cost ratio (1.76) at plant spacing of 20 and 25 cm. FH-114 depicted maximum BCR (1.62 and 1.61) when planted at plant spacing of 15 and 20 cm, respectively. Maximum marginal rate of return (1494%) was obtained by planting FH-142 at plant spacing of 30 cm. FH-114 recorded maximum marginal rate of return (788%), when planted at the plant-to-plant distance of 25 cm.