Taking Yan10 member of Bai211 well area of Nanliang oilfield as the research object, the stratigraphic subdivision, sedimentary facies type and sand body distribution characteristics are analyzed by making full use of drilling and core data. The results show that Yan10 formation can be subdivided into Yan101, Yan102, Yan103 and Yan104. Braided channel, core beach and flood-plain are the main sedimentary microfacies. The extension direction of Yan10 member sand body is north to south, and the whole channel sand body of the reservoir group is relatively developed, with large thickness, far extension and good connectiveness.
Nanliang Oilfield Extend 10 Sections Small Layer Division and Comparison Sand Body Distribution1. Introduction
The Jurassic in Ordos Basin includes Anding Formation, Zhiluo Formation, Yan’an Formation and Fuxian Formation, among which Yan’an Formation is divided into 10 reservoir groups from top to bottom [1] . Jurassic Yan’an Formation is considered as an important target stratum because of its good reservoir property and high productivity. However, the reservoir of Yan’an Formation is small in scale, strong in concealment, and difficult in exploration [2] . Based on the reservoir characteristics of Yan’an Formation, identifying its sedimentary facies and sand body distribution characteristics is more conducive to searching for subtle reservoirs such as strata and lithology [3] . On the basis of previous studies, through the analysis of core and well logging data, the sedimentary system, sedimentary facies type and sedimentary characteristics of Yan10 member oil formation in Bai211 well area of Nanliang oilfield are determined in this paper. By drawing the fine-layered sedimentary microfacies and sand body distribution map of Yan10 member oil formation in the study area, the distribution law and connectivity of sand body are clarified. It is of great practical significance to guide the follow-up exploration and development in Nanliang area.
2. Geological Profile
Ordos Basin starts from Yinshan Mountain in the north, reaches Qinling Mountain in the south, and is bounded by Luliang Mountain and Tengger Desert in the east and west [4] . Nanliang oilfield is located in the southwest part of Yishan slope of Ordos Basin (Figure 1). It is a west-dipping monoclene structure with a
dip angle of less than 1˚. The axial NE-southwest-trending rhinocline structure is developed on the slope.
Under the influence of regional tectonic subsidence and sediment source supply, the reservoir group in the Bai211 well area of Nanliang oilfield is mainly a braided river depositional system, which is mainly distributed in restricted valley filling sedimentation because it is formed in a relatively stable stage in a large area [5] .
3. Stratigraphic Division and Correlation
At the top of Yan10 member, a top coal seam about 2 m thick is developed, and its electrical characteristics are typical “three high and three low” as the main marker [6] , namely, high resistivity value, high compensated neutron value and high sonic time difference value. Low volume density value, low gamma ray value, low lithology density. Yan10 member oil formation itself developed a set of giant thick sandstone. Taking the typical well Jingbai 300-6 as an example, the mud deposits of Yan10 member developed at the top, and three sets of positive cycles were developed inside, with obvious mud interlayers at the depositional interface. It can be divided into four sub-layers, namely extension 101, Extension 102, extension 103 and Extension 104. Two phases of small scale channel deposition developed inside Yan101, and the two phases were intercut and overlapping. Due to the overlying channel erosion, the muddy interlayer was washed away, and the remaining scale was very small, but the natural gamma and spontaneous potential return characteristics were still visible, and the physical cycle was also clearly visible. Yan101 could be subdivided into Yan1011 and Yan1012 single-layer.
4. Sedimentary Characteristics4.1. Division of Sedimentary Facies
Braided channel deposits of Yan10 member of Bai211 well area are mainly channel sand bars and channel retention deposits, which mainly include various gravel transported from the upper reaches and mud gravel formed by river erosion of riverbank or underlying rock formation [7] . Core data show that the lower part of Yan 10 member in the study area is characterized by the development of medium-coarse sandstone, with scour surface developed at the bottom, some mud gravel (Figure 2(a)), oblique bedding (Figure 2(b)) and massive bedding formed during rapid deposition (Figure 2(c)). Most of the spontaneous potential and gamma curves are bell-shaped or compound bell-shaped with medium-high amplitude, which are typical characteristics of braided channel sedimentary logging response.
The main body of braided river deposition in the channel is the core beach microfacies, and the hydrodynamics is relatively weak. The channel is mainly dominated by lateral migration [8] . The core data show that the thickness of Yan10 member sand body in the study area is relatively large, and thin siltstone and mudstone interlayers are mostly found on the flanks of the river channel. The
braided channel and the core beach sand bodies are superimposed on each other, and the vertical superimposed sand bodies are thick. Large cross-bedding is mainly developed, such as oblique bedding (Figure 2(d)) and massive bedding (Figure 2(e)). The curves of spontaneous potential and gamma ray show obvious box shape or funnel shape, which shows typical logging response characteristics of core beach deposition.
The relatively flat part outside the riverbed at the bottom of the valley is the floodplain [9] . Because the energy of the upper channel of Yan 10 member in the study area weakens to abandonment, the lithology tends to become thinner vertically from bottom to top. Horizontal bedding and massive bedding are mainly developed, and coal seam is developed at the top. The spontaneous potential and gamma curve is a flat segment or a low-amplitude tooth near the mudstone base line. It is a fine-grained deposit with local silty bands.
By combining drilling core data, sedimentary facies identification markers and sedimentary background, the sedimentary facies of Yan10 member of Bai211 well area in Nanliang area are analyzed. It is concluded that braided river deposits are mainly developed in this area, and the sedimentary microfacies are braided channel, core beach and floodplain deposits.
4.2. Single Well Facies Characteristics
The microfacies of single well are analyzed based on the microfacies of Bai211 well area in Nanliang oilfield. Taking Well Bai 301-6 as an example (Figure 3), two sets of braided channel deposits are developed in this well from bottom to top. The lithology is mainly light gray fine sandstone, with massive structure, wavy bedding, plate bedding and other sedimentary structures. Among them, the channel sandbodies of Yan102 and Yan103 cut and overlap with each other to
form 48m thick sandstone, and the intermediate muddy interlayer has been washed away, and the natural gamma curve has slightly returned. The channel sandbodies deposited between Yan101 and Yan102 are separated by the floodplain deposits, whose lithology is mainly dark gray mudstone with a thickness of 8m, while the sandstone of Yan101 is about 10m thick. The natural gamma was in the shape of a toothed box. Due to the erosion of the overlying sandstone, the argillous interlayer between Yan1011 and Yan1012 had been washed away, and the natural gamma returned slightly. Due to the weakening of the hydrodynamics, the floodplain mudstone deposits developed on the top of Yan101.
5. Sand Body Distribution Characteristics
The distribution of sand bodies is mainly controlled by the distribution of sedimentary microfacies, and the distribution characteristics of channel in each period determine the distribution characteristics of sand bodies.
In general, the sand body of Yan10 member is relatively developed on the whole, with wide river channel, large thickness of sand body, far extension and good contiguity. The thickness of small-layer Yan102 sand body is large (Figure 4(a)), and the thickness of main channel sand body is greater than 15 m. The overall development of Yan1011 sand body is slightly worse (Figure 4(b)). The
development degree and distribution of Yan1012 sand body is similar to that of Yan1011 (Figure 4(c)). Some wells have relatively thick sand bodies, and the overall sand body size is smaller than that of Yan102.
The thickness of the sand body of the Yan10 member becomes thinner in the longitudinal direction, and the sediment range of the channel becomes smaller, and the sediment range of the floodplain and the core beach expands gradually. The sand body shows a trend of distribution from south to north, and the inheritance of sand body is greater than the migration.
6. Conclusions
1) Based on the microfacies histogram of a single well, it can be concluded that the coal seam 2 m thick is distributed on the top of the formation of Yan10 member in the study area, and the distribution is relatively stable, with obvious characteristics of marker layer, and the thickness of the formation is about 80 - 100 m. According to the correlation of sedimentary cycles, Yan10 member is divided into Yan101, Yan102, Yan103 and Yan104 layers. On the basis of a small-layer subdivision, Yan101 was subdivided into two fine layers, namely Yan1011 and Yan1012, with a total of five small layers.
2) The strata of Yan10 member are braided river subfacies sedimentary systems, mainly developed braided channel, floodplain and core beach sedimentary facies. Among them, braided river channel sand body is a good skeleton sand body, mainly medium fine sandstone, oblique bedding and massive bedding. During the evolution of sedimentary microfacies from yan1011 to 102, the range of channel sand bodies gradually increased, and the area of core beach increased from points to planes.
3) Each small layer of the Yan10 oil formation is mainly based on the sand body deposited by the river channel. The overall sand body is relatively developed, the river channel is wide, the sand body is thick, the extension is far, and the jointing property is good. On the plane, the sand body is generally distributed from south to north.
Conflicts of Interest
The author declares no conflicts of interest.
Cite this paper
Wang, Z.X. (2023) Analysis of Sedimentary Facies and Sand Body Distribution in Yan10 Member of Bai211 Well Area, Nanliang Oilfield. Open Access Library Journal, 10: e9972. https://doi.org/10.4236/oalib.1109972
ReferencesMao, F.Y., Hou, C.B., Gou, X.F., et al. (2013) Study on the Relationship between Jurassic Paleogeomorphology and Oil Accumulation in Zhenyuan Oilfield, Ordos Basin. Lithologic Reservoirs, 25, 44-48.Liu, L.Q., Liu, J.P., Li, Y., et al. (2010) Analysis on Main Controlling Factors of Jurassic Yan’an Formation Hydrocarbon Accumulation in Pengyang Area, Ordos Basin. Journal of Earth Sciences and Environment, 32, 263-267.Bai, W.W. (2007) Study on Depositional System of Jurassic Yan’an Formation in Southern Ordos Basin. Master’s Thesis, Northwestern University, Xi’an. (In Chinese)Pang, J.G., Chen, Q.H., Li, W.H., et al. (2012) Characteristics and Formation Mechanism of Yan’an Formation Marker Beds in Ordos Basin. Journal of Northwest University (Natural Science Edition), 42, 806-812.Fang, Z.Q. (2012) Evaluation on Reservoir-Forming Conditions of Upper Paleozoic Shale Gas in Eastern Ordos Basin. Master’s Thesis, Xi’an Shiyou University, Xi’an. (In Chinese)Zhang, L.L., Cai, W.Y., Gao, M., et al. (2009) Coalbed Methane Isothermal Adsorption Analysis and Fine Evaluation of Imaging Logging Data. China Coalbed Methane, 6, 38-43.Pang, J.G., Yang, Y.Y., Wang, G.C., et al. (2014) Early Jurassic Microfacies and Palaeogeomorphology Restoration in Wuqi Wangwazi Area, Ordos Basin. Journal of Lanzhou University (Natural Science Edition), 50, 465-471.Niu, W., Yang, J.Y., Yang, B., et al. (2021) Study on Sedimentary Facies and Reservoir Characteristics of Fuxian Formation in Jurassic. Petrochemical Applications, 40, 96-101.Cai, Z.D. (2015) Study on Fine Geological Characteristics of Yan10 Reservoir in M Block of Maling Oilfield, Ordos Basin. Master’s Thesis, Xi’an Shiyou University, Xi’an. (In Chinese)