As we all know, colleges and universities in our country have been established for a long time. Although some colleges and universities have established new campuses due to economic development, which has improved the laboratory environment to a certain extent, there are still quite a number of old laboratories, which were not designed according to the needs of the discipline construction of the whole school when they were built (Zhu, Peng, Wang et al., 2018). There is a common phenomenon that laboratories of different disciplines are in the same building, and even many researchers share a laboratory. Some laboratories are complex, and the personnel engaged in experiments cover undergraduates to doctoral students. The safety awareness of personnel is different, and the way to deal with some emergency accidents is also different. There are also some old laboratories because of the defects in architectural design. So far, it has not been equipped with sufficient and complete fire safety facilities.

For a long time, teachers and students in colleges and universities have focused their attention on teaching and scientific research, and on how to use laboratory facilities and equipment to publish high-level papers and scientific research results, which has led to the long-term neglect of safety issues in laboratories, and the lack of corresponding safety knowledge popularization education before laboratory personnel enter the laboratory. Although China has repeatedly emphasized the safety education and management of laboratories, most of them are mere formalities, difficult to persist for a long time, and lack of practical and feasible specific measures to ensure that safety education is deeply rooted in the hearts of the people. In the process of experimental operation, most of the experimenters do not abide by the operating rules, and laboratory managers generally do not formulate safety plans for some safety risk points (Yan, 2014), most of them hold the idea of “nothing to do with themselves”, and do not establish the idea that safety responsibility is more important than Mount Tai.

For a long time, many laboratory managers in Colleges and universities belong to part-time staff, and the specific responsibilities of laboratory managers are not very clear (Song, 2017), there is no regular inspection plan, many colleges and universities pay attention to the surface of laboratory safety inspection, there is a mere formality, there is no list of problems found, even if the list of problems is made, there will be no rectification. The same problem is found in many inspections, so that the problem can not be found in time, let alone play a preventive role.

With the increasing scientific research tasks in university laboratories, there are more and more experimental projects, and more and more people enter the laboratory to participate in the experiment, which inevitably produces more and more waste materials (solid waste, waste liquid, waste gas) (Wang, Zeng, Pan, & Wang, 2020), and some empty bottles of reagents are discarded at will in some laboratories; Some solid chemical substances are randomly packed in plastic bags without any labels and instructions; for some laboratories with fume hoods, many toxic and harmful gases are directly discharged into the atmosphere through the fume hoods, which has the potential risk of polluting the atmosphere; when some laboratories wash some reaction vessels, the wastewater is directly discharged from the sewer; However, in some laboratory waste liquids, the phenomenon of unclear identification of components and unclear identification is widespread. In a word, the problem of laboratory waste hazards has become increasingly prominent, and the hazards are widespread.

Although different laboratories may have different research contents, laboratory safety should be put in the first place. At present, some experimenters do not know enough about the harmfulness of chemicals and experimental procedures used in the experimental process. For those who are about to enter the laboratory to carry out experiments, they can be trained by laboratory managers. Make sure that the safety risk points and necessary escape skills of the laboratory are memorized, or take the way of compulsory courses, so that everyone can systematically learn the safety knowledge of the laboratory, and cover the toxicity and safety protection measures of some common reagents used in experiments, as well as the characteristics of some dangerous chemicals (such as flash point, flammability, etc.). Teratogenicity, etc. may cause harm, so as to have a clear idea. In order to hold regular lectures on laboratory safety knowledge, experts from universities can be invited to hold special reports on the theme of “laboratory safety management” and “laboratory system construction and practice” (Yu, Ye, & Chen, 2021), and some typical cases of laboratory safety accidents can also be analyzed, and the combination of online and offline can also be adopted. Through online laboratory safety education learning, safety education warning and Wechat public number, a number of laboratory safety education leaflets, safety education manuals and safety education exhibition boards are regularly produced.

It is necessary to strengthen the supervision and management of dangerous chemicals in laboratories, issue Regulations on the Management of Dangerous Chemicals in Laboratories, Regulations on the Registration of Dangerous Chemicals in Laboratories, Regulations on the Disposal of Dangerous Chemicals in Laboratories and Accounts for the Use of Dangerous Chemical Products in Laboratories, and establish laboratory pressure vessels, special equipment, large-scale instruments and equipment, heating equipment and refrigerators. Establish a safety inspection desk account for all kinds of equipment, and implement the system of using special equipment with certificates. To carry out special investigation of special equipment in laboratories, strengthen the source management of gas cylinders, and promulgate regulations on the safety management of gas cylinders, requiring regular quality inspection of flammable and explosive cylinders such as hydrogen, methane and acetylene in laboratories. From time to time, the types of dangerous chemicals, responsible persons for management, storage and storage, and use of accounts in various laboratories should be inspected in detail. Personnel and laboratories that do not meet the safety requirements should be publicized and notified on the Internet, and a notice of rectification should be issued to rectify within a time limit. Units and individuals that have not been rectified within the prescribed time limit can take compulsory measures such as closing doors. Regular reviews should be conducted to prevent old problems from becoming new ones. The three-level inspection system of school, college and individual can be implemented (Qin, Huang, & Yuan, 2017). The school sets up an inspection team led by the school leaders, which inspects once a month, and publicizes and notifies the inspection results on the Internet, and rectifies them within a time limit. The college is mainly established by the leaders in charge.

Therefore, continuous improvement of laboratory hardware conditions can effectively improve the safety situation of laboratories, which can be equipped with adequate fire safety facilities, such as fire extinguishers, smoke and gas alarms, in some dangerous places. Some professional laboratories should be equipped with some personal protective devices for experimenters, such as goggles, anti-virus area, etc. Of course, they can also make full use of artificial intelligence equipment to monitor the operation of water, electricity and gas in the laboratory in real time, which can effectively reduce the safety of the laboratory. The functional attributes of the laboratory should be fully considered in the design and construction, and the functional zoning of the laboratory should be realized according to different functional attributes, so as to minimize the safety risk of the laboratory.