Vegetable oil and fats are highly essential worldwide, in nutrition and commerce, because they are good sources of antioxidants, dietary energy, bio-fuels and thus, raw materials for food, cosmetic, pharmaceuticals and chemical industries [1] . Vegetable oils are normally extracted from fruits, seeds, kernels and nuts [2] . Edible oils are low in unsaturated fatty acids while the application of most industrial oils (less edible or inedible) is based on the properties of their fatty acid compositions [1] . Most edible oils are used in the food industries; however, reports [1] indicate a growing emphasis on industrial utilization, with about 80% of the world production of vegetable oil for human consumption and 20% on animal and chemical industries. In Nigeria, major edible vegetable oils are peanut oil, palm oil, coconut oil, cotton seed oil, soya bean oil etc. [3] [4] [5] . Inedible oils such as neem oil, jathropha oil, mahogany oil, moringa seed oil and calabash seed oil are also available in Nigeria. Other oils and fats which are less edible in Nigeria include palm kernel oil, shea butter, cocoa butter and castor oil. The demand for vegetable oil in Nigeria is widening as industrialists depend mostly on popular vegetable oils such as palm kernel oil, cotton seed oil, coconut seed oil and soya bean oil [1] .

Shea butter, a cream-colored fatty substance, is a less edible plant extract, from the shea nut tree, Vitellaria paradoxa, formerly known as Butyrospermum parkii. The shea tree is the major oil producing wild plant in Africa and begins to bear fruit of commercial quantities after about 20 to 50 years [6] . However, they can continuously produce shea nuts in commercial quantities for up to 200 years [7] . About 80% of the world shea nut production comes from Nigeria, Ghana, Burkina and Mali [8] . In Nigeria, shea nuts grow abundantly in Kwara, Niger, Kebbi, Kaduna and Oyo states [6] . Shea butter in most rural areas is used as skin moisturizer, lantern oil, for medicinal purposes and soap making [6] . It can equally serve as a cocoa butter equivalent in the manufacture of chocolate as well as an active ingredient in cosmetics [7] . Additionally, the relatively low free fatty acid content of shea butter and its use for biodiesel production have been reported [9] .

The grading of shea butter is based on West African regional standard vis-à-vis major oil parameters such as moisture content (%), free fatty acid (%), peroxide value (meq/kg) and insoluble impurity (%) has been documented [6] . Shea butter oil which can be used by cosmetics and pharmaceutical industries is classified Grade 1, those that are for making confectionaries, chocolates and margarines are classified Grade 2, while Grade 3 shea butter are for producing soap. Table 1 presents the qualities of different grades of unrefined shea butter according to West African Regional Standard [6] . However, lower grades of shea butter can

Source: [6] .

be refined to obtain higher grades.

The aim of this study is to extract shea kernel from Kwara State Nigeria, using chemical and traditional methods, as well as determine the physicochemical properties and fatty acid profile of the extracted of shea butter for use as raw materials in the oilfield industries.

Results for the physicochemical properties of chemically extracted shea butter (CSB) and traditionally extracted shea butter (TSB) are shown in Table 2 and Table 3 respectively, while results of fatty acid composition for CSB and TSB are presented in Table 4 and Table 5 respectively.

From Table 2, the color of CSB and TSB obtained were 0.2 off hue and 0.0 off hue respectively, TSB being slightly lighter than CSB. This could be as a result of the several washing of the TSB fat. Reference [14] reported the lovi bond color of crude palm oil as 11 red and 22 yellow. Comparatively, it will be less costly to bleach and refine shea butter due to its color. The CSB had a slightly irritating odor when compared to the TSB as observed from Table 2. This can be attributed to the chemical used in extraction (n-haxane).

The oil yield of CSB is 52% while that of TBS is 32%. The CSB yield which is above 40% indicates that shea butter can be easily extracted for use as plant oil. The CSB yield agrees with similar yield of 41.11% to 53.56% obtained by previous

authors [15] with n-hexane as the extraction solvent. However, similar results of 34.1% oil yield (when compared to 32% TBS) have equally been reported [15] while using traditional method of extraction for shea butter oil.

Refractive index is a measure of the ratio of the speed of light in a vacuum to that of oil under examination [11] . Refractive index is a means of quick identification of the nature or adulteration of any particular oil [16] . It increases with increasing chain length and increasing degree of unsaturation [14] . The refractive index values of CSB and TSB are 1.46935 and 1.46934 respectively. These values are in line with values obtained by previous authors [6] [11] [17] . Similarly, the refractive index values for castor oil and rubber seed oil are also in close range of 1.47 and 1.46 respectively, as reported by reference [18] .

The viscosity of oil is the resistance of oil to flow [11] . Viscosity increases with increase in molecular weight but decreases with increase in rate of unsaturation. The viscosity of CSB and TSB obtained were 62.91 mP/s and 67.84 mP/s respectively. These high viscosity values of shea butter at 40˚C show high resistance to flow, thus, indicating that the extracted shea butter contains more saturated fatty acids and more solid fats at 40˚C. This makes shea butter a good source of hard stock (solid fraction) for bakery shortening and margarine production [14] .

The presence of moisture in oil can support the growth of microbes [19] , thus leading to rapid rancidity. Also, the presence of water during transesterification reaction causes hydrolysis of triglycerides to free fatty acids which leads to soap formation and poor yields. From Table 2, CSB and TSB contain 0.0000% and 0.0018% moisture content. These values fall within the required value of Grade 1 unrefined shea butter as shown in Table 1. Reference [20] obtained 0.036% moisture in shea butter used for transesterification reaction, thus, CSB and TSB can be utilized in biodiesel production. The low moisture content of CSB and TSB can equally be as a result of the 4 hours oven drying.

Specific gravity helps to identify a sample and thus detects adulteration [21] . The specific gravity values obtained for CSB and TSB are 0.911 and 0.910 respectively. These values indicate that CSB and TSB are unadulterated as they fall within the required standard of 0.8 - 1.0 reported [6] . The pH values obtained for CSB (6.60) and TSB (6.80) both fall within the neutral pH range thus making the oil neutral.

Acid value is a measure of the amount of potassium hydroxide (mgKOH) required to neutralize the free acids in lg of oil/fat. The acid value of CSB is 4.77 mgKOH/g while that of TSB is 5.58 mgKOH/g as shown in Table 3. Free fatty acids (FFAs) are produced by the hydrolysis of oil and fats as a result of time, temperature and moisture content. FFAs are less stable than neutral oil and thus more prone to oxidation and turning rancid [22] . They can also result into soap formation in the presence of homogenous base catalyst during biodiesel production. FFA values of CSB and TSB are 2.39 and 2.79 respectively, thus classifying them as Grade 2 shea butter. These values are close to results obtained by previous authors [9] (2.279) and [23] (3.10) for FFA of shea butter. They are however lower than obtained values of reference [6] (4.21) and [24]

(5.32 - 6.60). The observed differences can be explained by the fact that free fatty acid of shea butter is affected by duration of storage, packaging material, processing, moisture content, germinating stage of shea nut fruit, and general climatic conditions [15] [22] .

Reference [25] reports that peroxide is the initial product of unsaturated fat oxidation and that fresh oil has peroxide values (P.V) below 10 meq O₂/kg while rancid oil gives peroxide values between 20 and 40 meq O₂/kg. Peroxide values obtained for CSB and TSB are 9.306 meq O₂/kg and 3.493 meq O₂/kg respectively. From Table 1, these values classify the extracted Shea butter oil as Grade1 [6] . The P.V of CSB relates positively to 8.80 meq O₂/kg and 9.80 meq O₂/kg obtained by previous authors [23] [26] respectively. However, it is lower than reported values of 15 meq O₂/kg [6] ; 14.2 meq O₂/kg [27] and 29.5 meq O₂/kg [28] .

Saponification value has been described as a measure of the alkali-reactive groups in fats and oil [29] . It is defined as the number of milligram of potassium hydroxide (mgKOH) required in neutralizing the fatty acids in lg of fats or oil. The saponification values of CSB and TSB are 208.371 mgKOH/g and 210.375 mgKOH/g respectively, these values fall within the required range of 180 - 360 mgKOH/g reported [6] . References [23] obtained 185.00 mgKOH/g; [11] reported a value of 189.53 mgKOH/g; while [20] in their study reported a value of 190 mgKOH/g. In similar study, reference [14] obtained 227.94 mgKOH/g. High saponification value indicates the suitability of the oil for soap production. The saponification value of 261.56 mgKOH/g has been reported [30] for palm kernel oil which is commonly used in soap production. Thus, CSB and TSB can equally be used for soap production.

Iodine value is a measure of degree of unsaturation in an oil sample. It can be defined as the number of grams of iodine that can be added to 100 g of oil. Reports [14] indicate that shea nut oil with low iodine value is an indication of its richness in saturated fatty acids and this ensures stability against oxidation, thus making it a good source of oil. CSB and TSB have iodine values of 61.3 g/100g and 64.8 g/100g respectively. These values are within the acceptable range (58 - 72 g/100g) of iodine value for shea butter at international level [14] . The obtained values are lower than 100, thus shea butter is a non-drying oil [31] . Similar works by previous authors, reported iodine values of 60.37 g/100g [32] , 61.31 g/100g [33] and 70.00 g/100g [14] .

From the ongoing, results from the physicochemical analysis of both the chemical extracted shea butter and the traditional extracted shea butter are very similar in properties with exceptions in the odor, oil yield and peroxide values. This observation can be attributed to the chemical (n-hexane) used in extraction. Thus, irrespective of the method of extraction, the quality of the oil is the same. However, in terms of oil yield, the chemical extracted method seems better. Additionally, the shea butter oil obtained from Kwara State, Nigeria fits more into the Grade 1 oil and thus will be of better use by cosmetics, pharmaceutical industries and oilfield chemical industries [6] .

Table 4 and Table 5 present results for fatty acid composition of CSB and TSB. Seven fatty acids out of the 16 saturated and 16 unsaturated fatty acids identified in shea butter as reported [34] were found in considerable quantities

in CSB and TSB. These seven fatty acids and their industrial applications are listed follows:

1) Palmitic acid, mainly used to produce soaps, is utilized as sodium palmitate. By hydrogenation, palmitic acid gives acetyl alcohol, which is useful in detergents and cosmetics production.

2) 9,15-octadecadienoic acid is used in making cosmetics, candles, plastics and hardening soap.

3) Stearic acid, a very common saturated acid, serves as raw material in the production of detergents, soaps, and cosmetics such as shampoos and shaving cream products.

4) Oleic acid, an unsaturated fatty acid that is very highly abundant in nature and used as a pharmaceutical solvent. It has a high lipid count which makes it a viable moisturizer; thus, some cosmetic companies add it to lotions and soaps in order to boost their ability to nourish the skin.

5) Nonadecanoic acid is a 19-carbon long-chain saturated fatty acid of plant or bacteria origin. It is used by insects as pheromones. It is also an intermediate in the biodegradation of n-icosane and can inhibit cancer growth. It has a role as a fungal metabolite.

6) Ricinoleic acid is an unsaturated omega-9 fatty acid and a hydroxy acid, majorly found in castor oil. It has anti-inflammatory properties, making it useful in treating irritated skin.

7) Arachidic acid is a minor constituent of cocoa butter, corn oil and peanut oil. It is used in the production of detergent, photographic materials and lubricants.

Oleic acid, which has a lower melting point (16.3˚C) than stearic acid (69.6˚C) affects the degree of hardness of shea butter depending on its relative proportion [35] . This implies that the higher oleic acid to stearic acid content of CSB and TSB, makes them relatively softer compared to published report [35] .

Shea butter was extracted using chemical and traditional techniques. The physicochemical analysis reveals that both the chemical extracted shea butter and the traditional extracted shea butter are very similar in properties. Differences in the odor, oil yield and peroxide values can be attributed to then-hexane used in chemical extraction. In terms of percentage oil yield, the chemical extracted method seems to be better while in terms of stability over time, the traditional extracted shea butter with much lower peroxide value appears to be better. Seven fatty acids were found in considerable quantities in CSB and TSB. The higher oleic acid to stearic acid content of both CSB and TSB, makes them relatively softer.

Results from this study indicate that the shea butter oil obtained from Kwara State, Nigeria fits more into the Grade 1 oil and will be of better use by cosmetics and soaps production companies, pharmaceutical industries, biodiesel and oilfield chemical industries.

The authors declare no conflicts of interest.

Ofoegbu-Chibuzo, N.E., Chukwu, U.J. and Okoye, I.P. (2022) Physicochemical Analysis and Fatty Acid Content of Chemical and Traditional Extracts of Shea Kernel (Vitellaria paradoxa) from Kwara State Nigeria. Open Access Library Journal, 9: e8295. https://doi.org/10.4236/oalib.1108295