OALibJOpen Access Library Journal2333-9705Scientific Research Publishing10.4236/oalib.1107364OALibJ-108919ArticlesBiomedical&Life Sciences Business&Economics Chemistry&Materials Science Computer Science&Communications Earth&Environmental Sciences Engineering Medicine&Healthcare Physics&Mathematics Social Sciences&Humanities β-Hydrosilylation of Allylic Derivatives with Cyclic and Linear Siloxanes in the Presence of Platinum Catalysts ZainabRbihi1SalahEddine Lanaya1MohamedYassine Guida1ElMostapha Rakib1AbdelatifBarakat2AbdelghaniEl Malki1AbdellahHannioui1INRA, UMR IngnAgropolymeres & Technol Emergentes 1208, 2 Pl Pierre Viala, F-34060 Montpellier, FranceLaboratoire de Chimie Organique et Analytique, Université Sultan My Slimane, Faculté des Sciences et Techniques, Béni-Mellal, Morocco02042021080411729, March 202127, April 2021 30, April 2021© Copyright 2014 by authors and Scientific Research Publishing Inc. 2014This work is licensed under the Creative Commons Attribution International License (CC BY). http://creativecommons.org/licenses/by/4.0/

The aim of this work is to study the influence of the nature and position of substitution at allyl benzene on the regioselectivity of the hydrosilylation reaction. We studied hydrosilylation of the various allyl derivatives with cyclic siloxane, D 4 H, and linears hydrosilylating agents, 1,1,3,3-tetramethyldisiloxane and MD HM, in the presence of platinum-based catalysts (Karstedt catalyst, platinum black). We also show the effects of the amount of catalyst on the conversion. Moreover, the influence on the temperature on catalytic activity and selectivity of the hydrosilylation reaction was explained. All new compounds were characterized by 1H, 13C, 29Si NMR and HRMS as well.

Allylbenzene Derivatives Karstedt’s-Catalyst Hydrosilylation Siloxane D<sub>4</sub><sup style="margin-left:-7px;">H</sup> Platinum Black1. Introduction

An important and well-known class of polymers is represented by silicones [1] [2] [3]. Several methods are known to produce organo functional silanes. One of the most frequently used is the transition metal catalysed hydrosilylation of olefins bearing functional groups [4] [5] [6] [7]. Hydrosilylation reactions are generally carried out in the presence of platinum catalyst [8].

Very few siloxanes resulting from a selective β-addition of D 4 H and linear hydrosilylating agent to the double bond of terminal olefins functionalized in the allylic position have been prepared to date. One interesting example is the quantitative β-hydrosilylation of the allyl alcohol with D 4 H described by Zhang and Laine [9]. In the other cases, characterization of reactions products seemed to be difficult [9].

We reported previously [10], the hydrosilylation conditions to obtain the product β and minimized the by-products (isomerization, hydrogenation) of this reaction, it was found that the use of 1 × 10−5 mole cat./mole olefin for the Karstedt catalyst or 1 × 10−3 mole cat./mole olefin for the platinum black at 40˚C allows the reaction to be carried out in a highly regioselective manner (100% of the β isomer).

Igarashi and al. [11], studied the hydrosilylation reactions of allyl derivatives with hydrosilanes (2,4,6,8-tetramethyl-cyclotetrasiloxane D 4 H ). These were carried out in the presence of the Karstedt’s catalyst in order to compare their structure-reactivity relationship, but the reaction was in selective with low yield (between 50% - 70%).

In this paper, we wish to report our results on the hydrosilylation of the substituted allylbenzene with D 4 H and linears hydrosilylating agents, 1,1-3,3-tetramethyl-disiloxane and MDHM in the presence of platinum catalysts. The choice of platinum catalysts used in this research for the hydrosilylation reaction is platinum (0)-1,3-divinyl-1,1,3,3-tetramethyldisiloxane complex solution or also known as Karstedt’s catalyst and platinum black. Also, the influence of substitution of allyl benzyl derivatives at different positions, amount of catalyst and reaction temperature on regioselectivity was studied.

2. Results and Discussion

Initially, the substituted allylbenzenes 1 (1.1 equiv.) were reacted with D 4 H (1.0 equiv.), using 1 × 10−5 mole of Karstedt’s catalyst/mole olefin or 1 × 10−3 mole of platinum black/mole of olefin in dry toluene at temperatures 40˚C and 90˚C for 3 hours, a reaction leading to the hydrosilylated products 3 and 4 took place. These latter could be isolated in excellent yields and good purity just by bulb to bulb elimination under high vacuum at 100˚C of the isomerized olefins (usually 3% to 11%) and traces (≤1%) of the reduced compound. Neither the 2160 cm−1 Si-H infrared band norits 1H NMR peak at 4.61 ppm was detectable in the finalcrude product. Results are reported in Table 1.

The results indicate that the Karsted’ catalyst shows excellent catalytic performance for the hydrosilylation of Allylbenzene derivatives. The conversion of Allylbenzene reaches up to 96% with a higher than 99% β-adduct selectivity (entry 1, Table 1). Meanwhile, 94% conversion of Allylbenzene with 98.3% selectivity for the β-adduct was obtained under the similar conditions when platinum black was used (entry 2, Table 1).

Hydrosilylation of alkenes catalyzed by Pt
EntryalkenesSilanesCat.Tem. (˚C)Time (h)Conversion (%)Select. (%)a
1AllylbenzeneD 4 H Karstedt40396>99
2AllylbenzeneD 4 H Platinum Black4039498.3
3AllylbenzeneD 4 H Without cat.4024//
41-allyl-2-methylbenzeneD 4 H Karstedt4039498.3
51-allyl-2-methylbenzeneD 4 H Platinum Black4038897.6
61-allyl-3-methylbenzeneD 4 H Karstedt4039598.4
71-allyl-3-methylbenzeneD 4 H Platinum Black4038997.7
81-allyl-4-methylbenzeneD 4 H Karstedt40398>99
91-allyl-4-methylbenzeneD 4 H Platinum Black4038597.3
101-allyl-2-methoxybenzeneD 4 H Karstedt90125396.2
111-allyl-2-methoxybenzeneD 4 H Platinum Black90124995.7
121-allyl-4-(trifluoromethyl)benzeneD 4 H Karstedt90125096.1
131-allyl-4-(trifluoromethyl)benzeneD 4 H Platinum Black90124695.8
141-allyl-2-bromobenzeneD 4 H Karstedt90125296.7
151-allyl-2-bromobenzeneD 4 HPlatinum Black90124795.8

Reaction condition: allylbenzene 18.2 mmol, D 4 H 4.13 mmol, Karstedt 10−5 mol of Pt/mole of olefin and 1 × 10−3 mole of Pt/mole of olefin for platinum black. aThe selectivity of β-adduct, the byproduct are α-adduct and alkane.

On the other hand, the conversion of 1-allyl-4-methylbenzene is increased to 98% when 1 × 10−5 mole of Karstedt’s catalyst/mole olefin was used. The conversion of 1-allyl-4-(trifluoromethyl)benzene reaches up to 50% and 46% with 96.1% and 95.8% β-adduct selectivity with Karstedt’s catalyst and platinum black respectively (entry 12, Table 1). The reactivity of this olefin is low for platinum catalyst due to the steric effect.

2.1. Effect of Amount of Pt on Hydrosilylation of Allylbenzene

The effect of the amount of catalyst on the conversion of allylbenzene is illustrated in Table 2. It can be seen that higher conversion is obtained when was used low quantity of catalyst during the same reaction time. 85% conversion with 99.7% selectivity of β-adduct is obtained by using 3 × 10−5 mol catalyst/mol of olefin, however, the better selectivity is attained by using lower amount of catalyst (i.e. 10−5 mol Karstedt and 10−3 mol Platinum Black catalysts/mol of olefin). The more catalyst leaded to generating propylebenzene through hydrogenation of allylbenzene. Similar results were found when X. Yang and co-workers used

Effect of amount of Pt-catalyst on hydrosilylation of Allylbenzene
Select. (%)
EntryCat.Catalyst Mol cat./mol olefinConversion (%)β-adductα-adductpropylbenzeneDehydrogenative silylation
1 2 3 4Karstedt Karstedt Karstedt Karstedt10−5 3 × 10−5 10−4 10−3 96 85 71 64100 99.7 98 96.8/ / / // / 2 3.2/ / / /
5 6Platinum Black Platinum Black10−3 5 × 10−3 94 88100 98.1/ // 1.9/ /

Reaction condition: allylbenzene 18.2 mmol, D 4 H 4.13 mmol, 40˚C, 3 h.

iron as a catalyst [12].

2.2. Effect of Reaction Temperature on the Hydrosilylation

The effect of temperature on catalytic activity and selectivity of the hydrosilylation reaction is shown in Figure 1 (using Speier’s catalyst as an example). With the increase of temperature, the time needed for 100% styrene conversion (t100) is shortened, while the selectivity for the β-adduct is kept at around 100%. This indicates that the temperature promotes the catalytic activity but has only a slight influence on the β-adduct selectivity (Figure 1(b)).

Indeed, the effect of reaction temperature on the catalytic activity was investigated and the results are illustrated in Table 3. It indicates that the activity of the Karstedt and platinum black is higher at 40˚C. Using the same amount of catalyst, the conversion of the substrate is between 71% and 79% at 90˚C after 3 h. When the temperature is 40˚C, the conversion of Allylbenzene is between 94 and 96% within 3 h.

2.3. Hydrosilylation of Allylbenzene with Various Silanes

Under similar conditions, different silanes were used (Table 4). The conversion of Allylbenzene is 96%, 94% and 90%, 87% (Karstedt’, platinum black) when D 4 H and MDHM were used, respectively. The corresponding selectivity of β-adduct is 100%. Tetramethyl disiloxane gave the conversion 72% and 71% with high selectivity of β-adduct, is 100%.

Effect of temperature on the hydrosilylaiton of Allylbenzene with D 4 H
Select. (%)
EntryCat.Temp. (˚C)Conversion (%)β-adductα-adductpropylbenzeneDehydrogenative silylation
1 2 3 4 5 6 7 8 9 10 11 12 13 14Karstedt Platinum black Karstedt Platinum black Karstedt Platinum black Karstedt Platinum black Karstedt Platinum black Karstedt Platinum black Karstedt Platinum black20 20 40 40 50 50 60 60 70 70 80 80 90 90No reaction No reaction 96 94 91 89 88 85 83 79 80 75 79 71/ / 100 100 100 100 97.8 94.2 96.2 91.8 94.3 89 94.1 81.3/ / / / / / / / / / / / / // / / / / / 2.2 5.8 3.8 8.2 5.7 11 5.9 18.7/ / / / / / / / / / / / / /

Reaction condition: allylbenzene 18.2 mmol, D 4 H 4.13 mmol. (0.3 μl of 10−5 mol of Pt/mole of olefin for Karstedt’s catalyst) and (0.244 g, 1 × 10−3 mole of Pt/mole of olefin for platinum black), 3 h.

Scope of silane for Pt catalyzed hydrosilylation of Allylbenzene
Select. (%)
EntryCat.SilaneConversion (%)β-adductα-adductpropylbenzeneDehydrogenative silylation
1 2 3 4 5 6Karstedt Platinum black Karstedt Platinum black Karstedt Platinum blackD 4 H D 4 H Tetramethyl disiloxane Tetramethyl disiloxane MDHM MDHM96 94 72 71 90 87100 100 100 100 100 100/ / / / / // / 4.1 4.3 / // / 24.9 24.7 / /

Reaction condition: allylbenzene 18.2 mmol, D 4 H 4.13 mmol. For Karstedt (0.3 μl, 10−5 mol of cat./mole of olefin) and (0.244 g, 1 × 10−3 mole of Pt/mole of olefin) for platinum black, 40˚C, 3 h.

3. Conclusion

In summary, we have developed a simple and easy method to synthesize functionalized siloxanes by D 4 H , MDHM and 1,1-3,3-tetramethyldisiloxane with a high regioselectivity. Karstedt’s-catalyst appeared to be most efficient. The same kind of reactivity and selectivity was observed with black platinum, although 100 times more catalyst was used. The nature of substituents on the aromatic ring or the hydrosilylating agent has a little influence on the β/α ratio. However, the amount of catalyst and reaction temperature appeared to be more important.

4. Experimental Method

All chemical reagents were commercially available. Toluene was distilled from sodium benzophenone ketyl immediately prior to use, platinum (0)-1,3-divinyl-1,1,3,3-tetramethyldisiloxane complex solution (Karstedt’s catalyst, Pt ~ 2% in xylene), 2,4,6,8-tetramethylcyclotetrasiloxane ( D 4 H ≥99.5% and ≥99.999% trace metals analysis). All other chemicals were used as received without further purification. All manipulations involving air-sensitive species were carried out in Schlenk apparatus under dry nitrogen. lH.n.m.r, 13C and 29Si spectra were recorded on a Brucker type device 500, 125 and 99 MHz instrument with CDCl3 as the solvent; the chemical shifts were reported in ppm, by reference to Me4Si. the coupling constants (J) are expressed in Hertz (Hz).

5. Experimental Procedures

a) Preparation of 1,3,5,7-tetra-(3-(phenyl)propyl)-1,3,5,7-tetramethyl-cyclotetrasiloxane (3a) from allylbenzene with D 4 H in the presence of Karstedt’s catalyst is representative.

The Solution of allylbenzene (2.4 ml, 18.2 mmol) and Karstedt’s catalyst (0.3 μl of a 0.336 mol/l solution of Pt/mole of olefin) in toluene (5 ml) was warmed to 40˚C under argon. D 4 H (1 ml, 4.13 mmol) was added slowly and subsequently heated at To this stirred solution wich was subsequently heated at 40˚C for 3 h. the hydrosilylation was followed by 1H NMR and the reaction stopped once the Si-H signal has disappeared. The solvent was then evaporated under reduced pressure. Volatile by-products and excess of olefin were removed by bulb to bulb distillation (100˚C, 0.01 torr). 1,3,5,7-tetra-(3-(phenyl)propyl)-1,3,5,7-tetramethyl-cyclotetrasiloxane was obtained as viscous oil in a 96% yields.

b) Preparation of 1,3,5,7-tetra-(3-(phenyl)propyl)-1,3,5,7-tetramethyl-cyclotetrasiloxane (3a) from allylbenzene with D 4 H in the presence of platinum black is representative.

A solution of allylbenzene (2.4 ml, 18.2 mmol) and platinum black (0.244 g, 1 × 10−3 mole of Pt/mole of olefin) in toluene (5 ml) was warmed to 40˚C. To this stirred solution, D 4 H (1 ml, 4.13 mmol) was added slowly and subsequently heated at 40˚C for 3 h. After filtration over glass wool, the solvent was evaporated under reduced pressure; volatile by-products and excess of olefin were removed by bulb to bulb distillation (100˚C, 0.01 torr).

c) Preparation of 1,3-di-(3-(phenyl)propyl)-1,1,3,3-tetramethyl-disiloxane (3h) from allylbenzene with 1,1,3,3-tetramethyldisiloxane in the presence of Karstedt’s catalyst is representative.

The Solution of allylbenzene (1.2 ml, 9.1 mmol) and Karstedt’s catalyst (0.3 μl of a 0.336 mol/l solution of Pt/mole of olefin) in toluene (5 ml) was warmed to 40˚C under argon. 1,1,3,3-tetramethyldisiloxane (0.72 ml, 4.13 mmol) was added slowly and subsequently heated at To this stirred solution which was subsequently heated at 40˚C for 3 h. the hydrosilylation was followed by 1H NMR and the reaction stopped once the Si-H signal has disappeared. The solvent was then evaporated under reduced pressure. Volatile by-products and excess of olefin were removed by bulb to bulb distillation (100˚C, 0.01 torr). 1,3-di-(3-(phenyl)propyl)-1,1,3,3-tetramethyl-disiloxane was obtained as viscous oil in a 72% yields.

d) Preparation of 1,3-di-(3-(phenyl)propyl)-1,1,3,3-tetramethyl-disiloxane (3h) from allylbenzene with 1,1,3,3-tetramethyldisiloxane in the presence of platinum black is representative.

A solution of allylbenzene (1.2 ml, 9.1 mmol) and platinum black (0.244 g, 1 × 10−3 mole of Pt/mole of olefin) in toluene (5 ml) was warmed to 40˚C. To this stirred solution, 1,1,3,3-tetramethyldisiloxane (0.72 ml, 4.13 mmol) was added slowly and subsequently heated at 40˚C for 3 h. After filtration over glass wool, the solvent was evaporated under reduced pressure; volatile by-products and excess of olefin were removed by bulb to bulb distillation (100˚C, 0.01 torr).

e) Preparation of 1,1,1,3,5,5,5-heptamethyl-3-(3-phenylpropyl)trisiloxane (3i) from allylbenzene with MDHM in the presence of Karstedt’s catalyst is representative.

The solution of allylbenzene (1.2 ml, 9.1 mmol) and Karstedt’s catalyst (0.3 μl of a 0.336 mol/l solution of Pt/mole of olefin) in toluene (2.5 ml) was warmed to 40˚C under argon. To this stirred solution MDHM (3 ml, 10.92 mmol) was added slowly and subsequently heated at 40˚C for 2 h. The end of the hydrosilylation reactions was determined by the disappearance of the Si-H chemical shift in the 1H NMR spectrum. The solvent and volatile by-products were removed under reduced pressure. Further the product was purified by distillation (70˚C, 0.05 torr) and recovered as a colorless oil in a 90% yield.

f) Preparation of 1,1,1,3,5,5,5-heptamethyl-3-(3-phenylpropyl)trisiloxane (3i) from allylbenzene with MDHM in the presence of platinum black is representative.

A solution of allylbenzene (1.2 ml, 9.1 mmol) and platinum black (0.244 g, 1 × 10−3 mole of Pt/mole of olefin) in toluene (2.5 ml) were warmed up to 40˚C under argon. To this stirred solution MDHM (3 ml, 10.92 mmol) was added slowly and subsequently heated at 40˚C for 2 h. After filtration over glass wool, the solvent and volatile by-products were removed under reduced pressure. The product was purified by distillation and recovered as a colorless oil.

(3a) yield = 96% for Karstedt, 94% for Platinum black. 1H NMR (500 MHz, CDCl3): δ 0.09 - 0.14 (m, 12H, Si-CH3), 0.60 (t, J = 11.46 Hz, 8H, Si-CH2), 1.65 - 1.76 (m, 8H, Si-CH2-CH2), 2.60 - 2.70 (m, 8H, CH2-Ph), 7.19 - 7.36 (m, 20H, CH-Ar); 13C NMR (125 MHz, CDCl3): δ −0.52 (Si-CH3), 17.03 (Si-CH2), 25.15 (Si-CH2-CH2), 39.40 (CH2-Ph), 125.73, 128.33, 128.56 (CH-Ar), 142.66 (C-Ar); 29Si NMR: δ −20.53, −20.46, −20.43; HRMS Calcd for (C40H56O4Si4)[M+]: 709.3256, Found: 709.3278.

(3b) yield = 94% for Karstedt, 88% for Platinum black. 1H NMR (500 MHz, CDCl3): δ0.01 (s, 12H, Si-CH3), 0.55 - 0.61 (t, J = 3.5 Hz, 8H, Si-CH2), 1.41 - 1.59 (m, 8H, Si-CH2-CH2), 2.26 (s, 12H, CH3-Ph), 2.51 - 2.59 (m, 8H, CH2-Ph), 7.00 - 7.22 (m, 16H, CH-Ar); 13C NMR (125 MHz, CDCl3): δ −0.64 (Si-CH3), 17.88 (Si-CH2), 19.89 (CH3-Ph), 24.39 (Si-CH2-CH2), 37.41 (CH2-Ph), 126.44, 129.52, 130.73 (CH-Ar), 136.46, 141.45 (C-Ar); 29Si NMR: δ −20.12, −20.08; HRMS Calcd for (C44H64O4Si4)) [M+]: 769.3241, Found: 769.3245.

(3c) yield = 95% for Karstedt, 89% for Platinum black. 1H NMR (500 MHz, CDCl3): δ 0.04 (s, 12H, Si-CH3), 0.61 - 0.68 (t, J = 13.5 Hz, 8H, Si-CH2), 1.42 - 1.53 (s, 8H, Si-CH2-CH2), 2.30 (s, 12H, CH3-Ph), 2.59 - 2.68 (m, 8H, CH2-Ph), 7.01 - 7.46 (m, 16H, CH-Ar); 13C NMR (125 MHz, CDCl3): δ −0.01 (Si-CH3), 18.03 (Si-CH2), 19.72 (CH3-Ph), 22.12 (Si-CH2-CH2), 34.63 (CH2-Ph), 126.15, 127.55, 128.92 (CH-Ar), 131.70, 137.53 (C-Ar); 29Si NMR: δ −20.11, −20.06; HRMS Calcd for (C44H64O4Si4)) [M+]: 769.3242, Found: 769.3248.

(3d) yield = 98% for Karstedt, 85% for Platinum black. 1H NMR (500 MHz, CDCl3): δ 0.01 (s, 12H, Si-CH3), 0.62 - 0.69 (t, J = 10 Hz, 8H, Si-CH2), 1.40 - 1.49 (m, 8H, Si-CH2-CH2), 2.54 (m, 12H, CH3-Ph), 2.60 (m, 8H, CH2-Ph), 7.00 - 7.12 (m, 16H, CH-Ar); 13C NMR (125 MHz, CDCl3): δ −0.00 (Si-CH3), 18.01 (Si-CH2), 19.61 (CH3-Ph), 22.08 (Si-CH2-CH2), 34.12 (CH2-Ph), 127.36, 127.98, 128.13 (CH-Ar), 136.65, 136.74 (C-Ar); 29Si NMR: δ −21.87; HRMS Calcd for (C44H64O4Si4)) [M+]: 769.3246, Found: 769.3253.

(3e) yield = 53% for Karstedt, 49% for Platinum black. 1H NMR (500 MHz, CDCl3): δ 0.02 (s, 12H, Si-CH3), 0.51 (t, J = 5 Hz, 8H, Si-CH2), 1.52 (s, 8H, Si-CH2-CH2), 2.22 - 2.31 (m, 8H, CH2-Ph), 2.45 - 2.56 (s, 12H, CH3-O), 7.02 - 7.22 (m, 16H, CH-Ar); 13C NMR (125 MHz, CDCl3): δ −0.00 (Si-CH3), 17.61 (Si-CH2), 22.05 (Si-CH2-CH2), 25.65 (CH2-Ph), 39.94 (CH3-O), 116.30, 125.93, 128.75, 129.92 (CH-Ar), 138.48, 143.17 (C-Ar); 29Si NMR: δ −20.87; HRMS Calcd for (C44H64O8Si4)) [M+]: 833.3266, Found: 833.3278.

(3f) yield = 50% for Karstedt, 46% for Platinum black. 1H NMR (500 MHz, CDCl3): δ 0.12 (s, 12H, Si-CH3), 0.73 (t, J = 4.5 Hz, 8H, Si-CH2), 1.70 (m, 8H, Si-CH2-CH2), 2.59 - 2.61 (m, 8H, CH2-Ph), 7.15 - 7.38 (m, 16H, CH-Ar); 13C NMR (125 MHz, CDCl3): δ −0.61 (Si-CH3), 19.81 (Si-CH2), 23.46 (Si-CH2-CH2), 28.36 (CH2-Ph), 115.54 (C-F3), 125.30, 128.48 (CH-Ar), 136.33, 144.16 (C-Ar); 29Si NMR: δ −22.06; HRMS Calcd for (C44H52F12O4Si4)) [M+]: 985.2032, Found: 985.2045.

(3g) yield = 52% for Karstedt, 47% for Platinum black. 1H NMR (500 MHz, CDCl3): δ 0.14 (s, 12H, Si-CH3), 0.59 (t, J = 2.5 Hz, 8H, Si-CH2), 1.65 (s, 8H, Si-CH2-CH2), 2.58 - 2.63 (m, 8H, CH2-Ph), 7.05 - 7.51 (m, 16H, CH-Ar); 13C NMR (125 MHz, CDCl3): δ −0.68 (Si-CH3), 19.72 (Si-CH2), 23.61 (Si-CH2-CH2), 28.80 (CH2-Ph), 126.82 (C-Br), 127.01, 129.46, 129.60 (CH-Ar), 131.82, 134.68 (C-Ar); 29Si NMR: δ −23.29, −24.64; HRMS Calcd for (C40H52Br4O4Si4)) [M+]: 1028.8021, Found: 1028.8067.

(3h) yield = 72% for Karstedt, 71% for Platinum black. 1H NMR (500 MHz, CDCl3): δ 0.00 (s, 6H, Si-CH3), 0.61 (t, J = 9.41 Hz, 4H, Si-CH2), 1.58 (m, 4H, Si-CH2-CH2), 2.61 (m, 4H, CH2-Ph), 7.01 - 7.39 (m, 10H, CH-Ar); 13C NMR (125 MHz, CDCl3): δ −0.22 (Si-CH3), 20.75 (Si-CH2), 22.02 (Si-CH2-CH2), 29.66 (CH2-Ph), 125.73, 128.33, 128.56 (CH-Ar), 142.66 (C-Ar); 29Si NMR: δ −22.87; HRMS Calcd for (C22H34OSi2)) [M+]: 370.6878, Found: 370.6889.

(3i) yield = 90% for Karstedt, 87% for Platinum black. 1H NMR (500 MHz, CDCl3): δ 0.01 (m, 18H, Si-(CH3)3), 0.14 (s, 3H, Si-CH3), 0.61 (t, J = 10.46 Hz, 2H, Si-CH2), 1.58 (m, 2H, Si-CH2-CH2), 2.60 - 2.70 (m, 2H, CH2-Ph), 7.20 - 7.26 (m, 5H, CH-Ar); 13C NMR (125 MHz, CDCl3): δ −3.77 (Si-CH3), 0.33 (Si-(CH3)3), 20.83 (Si-CH2), 25.46 (Si-CH2-CH2), 35.66 (CH2-Ph), 125.98, 128.39, 128.44 (CH-Ar), 142.52 (C-Ar); 29Si NMR: δ −21.19 (Si-CH3), 6.81 (Si-(CH3)3); HRMS Calcd for (C16H32O2Si3) [M+]: 340.6858, Found: 340.5423.

Conflicts of Interest

The authors declare no conflicts of interest regarding the publication of this paper.

Cite this paper

Rbihi, Z., Lanaya, S.E., Guida, M.Y., Rakib, E.M., Barakat, A., El Malki, A. and Hannioui, A. (2021) β-Hydrosilylation of Allylic Derivatives with Cyclic and Linear Siloxanes in the Presence of Platinum Catalysts. Open Access Library Journal, 8: e7364. https://doi.org/10.4236/oalib.1107364

ReferencesKendrick, T.C., Parbhoo, B. and White, J.W. (1989) Chemistry of Organic Silicon Compounds. In: Patai, S. and Rappaport, Z., Eds., Chapter 21, John Wiley & Sons, Chichester.Chojnowsky, J. (1993) Siloxane Polymers. In: Clarson, S.J. and Semlyen, J.A., Eds., Englewood Cliffs, Prentice Hall, NJ, 1.Saam, J.C. (1990) In Silicon Based Polymer Science. In: Zeigler, J.M. and Gordon Fearon, F.W., Eds., Advances in Chemistry Series 224, American Chemical Society, Washington, DC.Ojima, I. (1989) Chemistry of Organic Silicon Compounds. In: Patai, S. and Rappaport, Z., Eds., Chapter 25, John Wiley & Sons, Chichester.Yoshii, E., Kobayashi, Y., Koizumi, T. and Oribe, T. (1974) Hydrosilation of Unsaturated Esters. Chemical and Pharmaceutical Bulletin, 22, 2767-2769.Ryan, J.W. and Speier, L. (1964) The Addition of Silicon Hydrides to Olefinic Double Bonds. VIII. The Addition of Trichlorosilane-d. Journal of the American Chemical Society, 86, 895-898.Speier, J.L., Webster, J.A. and Barnes, G.H. (1957) The Addition of Silicon Hydrides to Olefinic Double Bonds. Part II. The Use of Group VIII Metal Catalysts. Journal of the American Chemical Society, 79, 974-979. https://doi.org/10.1021/ja01561a054Lewis, L.N. and Lewis, N.J. (1986) Platinum-Catalyzed Hydrosilylation Colloid Formation as the Essential Step. Journal of the American Chemical Society, 108, 7228. <br />https://doi.org/10.1021/ja00283a016Zhang, C.R. and Laine, M.J. (2000) Hydrosilylation of Allyl Alcohol with [HSiMe2OSiO1.5]8: Octa(3-Hydroxypropyldimethylsiloxy)octasilsesquioxane and Its Octamethacrylate Derivative as Potential Precursors to Hybrid Nanocomposites. Journal of the American Chemical Society 122, 6979-6988. https://doi.org/10.1021/ja000318rEl Malki, Hannioui, A., Rakib, E.M., Knouzi, N. and Vaultier, M. (2011) Regioselective Platinum Catalyzed-Hydrosilylation of Allylic Benzene Derivatives with Cyclic Siloxane D4H. Letters in Organic Chemistry, 8, 361-363. https://doi.org/10.2174/157017811795684992Igarashi, M., Matsumoto, T., Kobayashi, T., Sato, K., Ando, W., Shimada, S., Hara, M. and Uchida, H. (2014) Hydrosilylation of Allyl Derivatives with T, D and M Type Hydrosilanes. Journal of Organometallic Chemistry, 749, 421-427. https://doi.org/10.1016/j.jorganchem.2013.10.014Yang, X.L., Bai, Y., Li, J.Y., Dai, Z.N. and Peng, J.J. (2019) Hydrosilylation of Alkenes Catalyzed by Fe Powder. Phosphorus, Sulfur, and Silicon and the Related Elements, 194, 1-4. <br />https://doi.org/10.1080/10426507.2018.1506782