Zhangjiakou is a prefecture level city in Hebei Province, which is rich in new energy resources. The main load of the multi-energy complementary distributed energy system project is Zhangjiakou DahuaJianguo Hotel. The hotel mainly receives group catering, accommodation, and conferences. The arrival time of guests is uncertain, which causes unstable and fluctuating loads. Therefore, through long-term observation and recording, the law and characteristics of the distributed energy system load can be obtained.

At present, the hotel mainly relies on 3000 m³ solar energy for cross-season heat storage and heating. Due to insufficient heating capacity, a 2 T/h heating electric boiler (actually 1.5 T/h) and a 1 T/h hot water electric boiler (actually 0.5 T/h), which also provides hot water for swimming pools, are used to supplement heat. The heating demand in winter and the cooling demand in summer lead to an increase in power consumption. Other electric loads in the hotel include guest rooms, restaurants, and meeting rooms.

The operating current of the main transformer is 1500 - 1700 A in winter and 600 - 800 A in summer, as shown in Figure 1.

The hot water consumption is 2000 - 2400 kWh/day in winter and 1000 - 2000 kWh/day in summer, as shown in Figure 2.

In order to achieve multi-energy complementarity, MCDES uses a trough photothermal system to decompose methanol into H₂ and CO syngas, drives a 500 kW internal combustion generator set, and provides high-efficiency power and heat. The specific technical parameters are as follows:

· Electricity: a 500 kW internal combustion generator set, generating power of 500 kW and efficiency of 35.1%;

· Thermal energy of power exhaust: 250˚C, 211.4 kW; 170˚C, 293.3 kW; 90˚C, 373.9 kW;

· Cylinder jacket water heat energy: 70˚C - 90˚C, 369.25 kW.

In order to realize the cascade utilization of heat energy, the power waste heat depth cascade utilization system is designed, and a low-grade waste heat driven full heat recovery heat pump and an efficient compression heat pump are developed. The specific technical parameters are as follows:

· Electricity: cooling and generator power is 4.5 kW;

· Refrigeration inlet: water temperature < 20˚C, flow rate > 15 m³/h;

· Absorption heat pump unit: temperature < 70˚C, heating capacity is 210.5 kW;

· Four-stage compression heat pump unit: the heating temperature < 70˚C, the heating capacity is 249 kW, and the required power is 200 kW.

A hundred kW-level wind energy direct heating (cooling) system is designed, which can meet the needs of winter heating and summer cooling for 3000 m² buildings in towns. The specific technical parameters are as follows:

· Heating capacity > 300 kW, wind energy utilization factor > 42%;

· Hot water outlet temperature > 60˚C, cold water outlet temperature 5˚C - 10˚C.

Aiming at supplying heat to 3000 m² buildings in towns, solar tower heliostat technology is used to gather heat, which includes 66 heliostats with a total area of 760 m², a heat absorber with a total height of 22.313 m, and a cylindrical concrete structure heat storage pool with an effective volume of 3000 m³.

In the multi-energy complementary distributed energy system, a 1 MW polysilicon photovoltaic power generation system is designed.

In the multi-energy complementary distributed energy system, a 500 AH storage system is designed. In addition, a smart control and display system is built for MCDES.

Based on the distributed energy system project designed above, Figure 4 shows the power generation situation in winter and Figure 5 shows the heating situation in winter

As can be seen from Figure 4 and Figure 5, due to the uncertainty of hotel load and the discontinuity of distributed energy, in addition to the inability to carry out active control, there are also intermittent situations, which leads to insufficient energy supply as well as the waste of oversupply. Therefore, energy storage is a very critical link. The establishment of a 3000 m³ cross-season thermal storage cistern provides the necessary guarantee for the full and stable heat use of the system.

Due to the poor regularity of load changes in MCDES, it is difficult to carry out active control, so the buffer intermediate cistern is selected for random real-time control.

The operating time of the thermochemical power generation and heating system can be extended, which is directly related to the selected gas storage tank. In order to save investment, a 50 m³ gas storage tank can be used to extend the operation for 2 hours.

From the equipment operation principle and heating diagram, if the four-stage compression heat pump unit is driven by photovoltaic power, it can only operate during the day. Therefore, aiming at improving the controllability, an electric drive method is used to increase the temperature.

Since the renewable energy supply in this system cannot fully meet the peak load of the hotel, the system must be connected to the grid. Once the load increases, mains electricity is still needed to supply power and to drive the electric boiler to supply heat.

The multi-energy complementary distributed energy system adopts the grid-connected operation mode without power injection. Under normal circumstances, after meeting the electricity demand of the hotel, the surplus electric energy is first sent to the electricity storage part, whose capacity is small. In addition, hot water electric boilers or compression heat pump units can be started to use other surplus electricity for heating.

There are many links and equipment for distributed heating in this system, which are generally collected in the buffer intermediate cistern to supply heat to the hotel. When the temperature of the intermediate cistern is too high, hot water can be sent to 3000 m³ cross-season thermal storage cistern. When the temperature of the intermediate cistern is too low and the distributed energy supply is unable to provide power, the hot water of the cross-season thermal storage cistern can be drawn for supplementary heating. The cross-season thermal storage cistern is a layered pool with an upper water temperature of 50˚C, which can meet the heat demand of users such as hotels.