Article citationsMore>>

E. Llobet, P. Ivanov, X. Vilanova, J. Brezmes, J. Hubalek, K. Malysz, I. Gràcia, C. Cané and X. Correig, “ScreenPrinted Nanoparticle Tin Oxide Films for High-Yield Sensor Microsystems,” Sensors and Actuators B: Chemical, Vol. 96, No. 1-2, 2003, pp. 94-104.
http://dx.doi.org/10.1016/S0925-4005(03)00491-X

has been cited by the following article:

• TITLE: Amperometric Hydrogen Peroxide Biosensor Based on Horseradish Peroxidase Entrapped in Titania Sol-Gel Film on Screen-Printed Electrode

  AUTHORS: Reza E. Sabzi, Fereshteh Rasouli, Farshad Kheiri

  KEYWORDS: Screen-Printed Electrode; Ag Nanoparticle; Titania Sol-Gel; Biosensor

  JOURNAL NAME: American Journal of Analytical Chemistry, Vol.4 No.11, November 11, 2013

  ABSTRACT: We report the fabrication of disposable and flexible Screen-Printed Electrodes (SPEs). This new type of screen-printed electrochemical platform consists of Ag nanoparticles (AgNPs) and graphite composite. For this purpose, silver nanoparticles were first synthesized by a chemical reduction method. The morphology and structure of the AgNPs were analyzed using a Scanning Electron Microscope (SEM) and UV-Visible spectroscopy. Graphite was chosen as the working electrode material for the fabrication of a thick-film. The fabrication of a screen-printed hydrogen peroxide biosensor consisting of three electrodes on a polyethylene terephthalate (PET) substrate was performed with a spraying approach (working, counter and reference: enzyme electrode, graphite, pseudo reference: Ag/AgCl). This biosensor was fabricated by immobilizing the peroxidase enzyme (HRP) in a Titania sol-gel membrane which was obtained through a vapor deposition method. The biosensor had electrocatalytic activity in the reduction of H2O2 with linear dependence on H2O2 concentration in the range of 10－5 to 10－3 M; the detection limit was 4.5 × 10－6 M.