Article citationsMore>>

W. Wang, Y. Yu, T. An, G. Li, H. Y. Yip, J. C. Yu and P. K. Wong, “Visible-Light-Driven Photocatalytic Inactivation of E. coli K-12 by Bismuth Vanadate Nanotubes: Bactericidal Performance and Mechanism,” Environmental Science & Technology, Vol. 46, No. 8, 2012, pp. 4599-4606. http://dx.doi.org/10.1021/es2042977

has been cited by the following article:

• TITLE: A Rapid Low Power Ultra-Violet Light-Assisted Bacterial Sensor for Coliform Determination

  AUTHORS: Jia Shin Ho, Chee-Seng Toh

  KEYWORDS: Bacterial Sensor; Low Power; Cell Inactivation; E. coli; Coliform; Photocatalysis

  JOURNAL NAME: American Journal of Analytical Chemistry, Vol.4 No.10A, September 26, 2013

  ABSTRACT: Titanium dioxide (TiO2) particle-incorporated Prussian blue (PB) sensor for the detection and inactivation of Escherichia coli (E. coli) is developed in this study. The system requires low power ultra-violet (UV) light to photoactivate TiO2 particles and change of signal response is measured immediately upon irradiation using cyclic voltammetry. The generation of free radical species (OH.) and H2O2 from the oxidation of water by the hole (h+) are the main components which cause destruction of cell membrane and eventually result in the inactivation of cell. Our study also shows direct oxidation of cells by h+ as one of the mechanisms for cell inactivation due to the close contact between TiO2 particles and E. coli cells. Highly attractive features of this unique sensor include its ability to be regenerated and reused for at least three times without the use of harsh chemicals, good reproducibility and its specificity in bacteria sensing when tested against organic contaminants, which potentially reduce the operation cost when incorporated into water disinfection system. Its superior performance in detection of total coliform without additional steps of sample treatment is also demonstrated in river water. TiO2 particle-incorporated PB membrane sensor exhibits signal response with higher current output compared to PB-TiO2 coated screen printed carbon electrode (SPCE) due to its porous structure and higher surface area, suggesting its potential development into a powerful and low cost contamination monitoring tool.