Article citationsMore>>

E. Rocca, G. Bourguignon and J. Steinmetz, “Corrosion Management of PbCaSn Alloys in Lead-Acid Batteries: Effect of Composition, Metallographic State and Voltage Conditions,” Journal of Power Sources, Vol. 161, No. 1, 2006, pp. 666-675. http://dx.doi.org/10.1016/j.jpowsour.2006.04.140

has been cited by the following article:

• TITLE: Pb-Ca-Sn-Ba Grid Alloys for Valve-Regulated Lead Acid Batteries

  AUTHORS: Marina M. Burashnikova, Irina V. Zotova, Ivan A. Kazarinov

  KEYWORDS: Lead-Acid Battery; Lead Alloys; Barium; Corrosion Layer

  JOURNAL NAME: Engineering, Vol.5 No.10A, September 25, 2013

  ABSTRACT: The effect of barium additives on the process of anodic corrosion of lead-tin-calcium alloys in a 4.8 М sulfuric acid solution was studied. Cyclic voltammetry, impedance spectroscopy, weight loss measurements and scanning electronic microscope analysis have allowed exploring the oxidation process and characterizing the formed corrosion layer. According to our results, barium introduction into lead-tin-calcium alloys increases their hardness, reduces their electrochemical activity, and improves their corrosion stability. Reduction of the calcium content in the alloy can be compensated by adding barium. Barium dopation at lead-tin-calcium alloys decreases the resistance of the oxide layer formed on the grid surface, in a deeply discharged state, and raises its resistance during floating conditions and at a charged state of the positive electrode.