Article citationsMore>>

H. Ghassemi and M. Ghiasi, “A Combined Method for the Hydrodynamic Characteristics of Planing Crafts,” Ocean Engineering, Vol. 35, No. 3-4, 2008, pp. 310-322. doi:10.1016/j.oceaneng.2007.10.010

has been cited by the following article:

• TITLE: Numerical Hydrodynamic of Multihull Tunnel Vessel

  AUTHORS: Morteza Ghassabzadeh, Hassan Ghassemi

  KEYWORDS: Multi-Hull; Tunnel Vessel; Hydrodynamic Simulations; Finite Volume Method

  JOURNAL NAME: Open Journal of Fluid Dynamics, Vol.3 No.3, September 18, 2013

  ABSTRACT: The research described in this paper was carried out to predict the numerical hydrodynamic of multihull tunnel vessel at various speeds. The hull form of vessel is fairly generated by the tunnel hull form generator (THFG) code using the Non Uniform Rational B-Spline (NURBS) method. Then, the hydrodynamic simulation of high speed vessel is carried out based on finite volume discretization method using volume of fluid (VOF) model to consider free surface between water and air phases around the vessel. A dynamic mesh restructuring method is applied for grid generation regarding to the heave and pitch motions of vessel in each time step. Calculated drag and trim angles at various speeds are in good agreement with experimental data. More results are carried out at the speed 15 knots to understand the convergency of the pitch and heave motions.