Article citationsMore>>

L. A. Utracki and B. D. Favis, “Polymer Alloys and Blends,” In: P. N. Cheremisinoff, Ed., Handbook of Polymer Science and Technology, Marcel Dekker Inc, New York, 1989, pp. 121-201.

has been cited by the following article:

• TITLE: Study the Effect of Recycled Tire Rubber on the Mechanical and Rheological Properties of TPV (HDPE/Recycled Tire Rubber)

  AUTHORS: Ziyad T. Al-Malki, Einas A. Al-Nasir, Moayad N. Khalaf, Raed K. Zidan

  KEYWORDS: Thermoplastic Vulcanized Rubber; Rubber Recycling; Mechanical Properties

  JOURNAL NAME: Open Journal of Polymer Chemistry, Vol.3 No.4, September 18, 2013

  ABSTRACT: Thermoplastic elastomeric blends prepared from blending of (10%, 20%, 30%, 40% and 50 wt%) high density polyethylene(HDPE) and (10%, 20%, 30%, 40% and 50 wt%) ground rubber tire (TPV-R). The blends prepared contain (HDPE)/polybutadiene (TPV-V). The two blends were successfully prepared through a dynamic vulcanization process, involving dicumyl peroxide (3%) as vulcanizing agent. The data of the mechanical (tensile strength at yield, %elongation and young modulus) and rheological properties (shear stress, shear rate, viscosity, flow behavior index and activation energy of melt flow) of the TPV-V and TPV-R showed that there was comparable results between the two blends.