Article citationsMore>>

Y. Inoue, “Tatara and the Japanese Sword: The Science and Technology,” Acta Mechanica, Vol. 214, No. 1-2, 2010, pp. 17-30. doi:10.1007/s00707-010-0308-7

has been cited by the following article:

• TITLE: Parallel Deformation of the Metals

  AUTHORS: Chetan Nikhare

  KEYWORDS: Plasticity; Bi-Metal; Metal Forming; Mathematical Model; Numerical Model

  JOURNAL NAME: Modeling and Numerical Simulation of Material Science, Vol.3 No.3, July 1, 2013

  ABSTRACT: The metal goes into the plastic deformation after the application of external load. Most of the metal forming industries work on this principle of plastic deformation. Thus the understanding of plastic deformation in the metal forming industry is important. The research on the single material plastic deformation has been carried out from many centuries before the era of Tresca. In this study the two metals 0.05% C steel annealed (soft metal) and 0.6% C steel quenched and tempered (hard metal) were deformed plastically in the parallel combination in the composite form. This study has been carried out with simple mathematical theory and simulated numerical model. The comparison shows the exact match between the mathematical and numerical results. It is also observed that the individual metal thickness affects the deformation flow curve.