Article citationsMore>>

A. Carvalho, J. Rebello, M. Souza, L Sagrilo and S. Soares, “Reliability of Non-Destructive Test Techniques in the Inspection of Pipelines Used in the Oil Industry,” International Journal of Pressure Vessels and Piping, Vol. 85, No. 11, 2008, pp. 745-751. doi:10.1016/j.ijpvp.2008.05.001

has been cited by the following article:

• TITLE: Oil Transmission Pipelines Condition Monitoring Using Wavelet Analysis and Ultrasonic Techniques

  AUTHORS: Waheed Sami Abushanab

  KEYWORDS: Ultrasonic; Abaqus; Continuous Wavelet Transform (CWT)

  JOURNAL NAME: Engineering, Vol.5 No.6, June 19, 2013

  ABSTRACT: In this paper, a reliable and sensitive diagnostic method for oil pipelines based on wavelet analysis and ultrasonic technique. This will be achieved by the use of 3-D finite element modeling software (Abaqus CAE 6.10) combined with a power full wavelet based signal processing technique will be used to collect the empirical ultrasonic data to validate the developed diagnostic method. The affect known seeded faults i.e., 1 mmhole at 25%, 50%, 75% and 100% depth in pipe wall were investigated using FEM techniques. A developed acoustic transceiver (Air Ultrasonic Ceramic Transducer 235AC130) will be used to collect the empirical ultrasonic data to validate the developed diagnostic method. The amplitudes and frequency spectra of the ultrasonic signals were measured and the predicted results were found to be in good agreement with the measured data, and that to confirm that this method can provide important information on pipe defects.