Article citationsMore>>

J. M. Triszcz, A. Porta and F. G. Einschlag, “Effect of Operating Conditions on Iron Corrosion Rates in Zero-Valent Iron Systems for Arsenic Removal,” Chemical Engineering Journal, Vol. 150, No. 2-3, 2009, pp. 431-439. doi:10.1016/j.cej.2009.01.029

has been cited by the following article:

• TITLE: Sorption Kinetic of Arsenate as Water Contaminant on Zero Valent Iron

  AUTHORS: Osama Eljamal, Keiko Sasaki, Tsuyoshi Hirajima

  KEYWORDS: Arsenic Sorption; Langmuir Kinetic Model; Zero-Valent Iron; Removal of Arsenate; Iron(III)

  JOURNAL NAME: Journal of Water Resource and Protection, Vol.5 No.6, June 14, 2013

  ABSTRACT: This study investigates the sorption of arsenate from water using zero-valent iron ZVI as sorbent. Batch experiments were carried out to study the sorption kinetics of arsenate under different concentrations of arsenate varies from 0.5 to 200 mg/l. A kinetic model was considered to describe the arsenates sorption on ZVI material. The kinetics of the arsenate sorption processes were described by the Langmuir kinetic model. The sorption capacity increases with high initial concentration which obtained the maximum sorption 2.1 mg/g at 200 mg/l of arsenate initial concentration. The results show that the rapid initial sorption rates of arsenate were occurred at the beginning of experiments running time, followed by a slower removal that gradually approaches an equilibrium condition. The data from laboratory batch experiments were used to verify the simulation results of the kinetic model resulting in good agreement between measured and modeled results. The results indicate that ZVI could be employed as sorbent materials to enhance the sorption processes and increase the removal rate of arsenate from water.