Article citationsMore>>

K. Honjo, R. Hashimoto and H. Ogiyama, “Current Status of 300 kW Industrial Ceramic Gas Turbine R & D in Japan,” Transactions of ASME, Vol. 115, No. 1, 1993, pp. 51-57.

has been cited by the following article:

• TITLE: Energy-Saving and Economical Evaluations of a Ceramic Gas Turbine Cogeneration Plant

  AUTHORS: Satoru Okamoto

  KEYWORDS: Energy; Exergy; Energy-Saving; Economical Evaluation; Ceramic Gas Turbine; Cogeneration Plant

  JOURNAL NAME: Open Journal of Energy Efficiency, Vol.2 No.2, June 14, 2013

  ABSTRACT: A ceramic gas turbine can save energy because of its high thermal efficiency at high turbine inlet temperatures. This paper deals with the thermodynamic and economic aspects of a ceramic gas turbine cogeneration system. Here cogeneration means the simultaneous production of electrical en-ergy and useful thermal energy from the same facility. The thermodynamic performance of a ceramic gas turbine cycle is assessed using a computer model. This model is used in parametric studies of performance under partial loads and at various inlet air temperatures. The computed performance is compared to the measured performance of a conventional gas turbine cycle. Then, an economic evaluation of a ceramic gas turbine cogeneration system is investigated. Energy savings provided by this system are estimated on the basis of the distributions of heat/power ratios. The computed economic evaluation is compared to the actual economic performance of a conventional system in which boilers produce the required thermal energy and electricity is purchased from a utility.