Article citationsMore>>

A. Naber, H.-J. Maas, K. Razavi and U. C. Fischer, “Dynamic Force Distance Control Suited to Various Probes for Scanning Near-Field Optical Microscopy,” Review of Scientific Instruments, Vol. 70, No. 10, 1999, pp. 3955-3961. doi:10.1063/1.1150019

has been cited by the following article:

• TITLE: Scanning Head for the Apertureless near Field Optical Microscope

  AUTHORS: D. V. Kazantsev, H. Ryssel

  KEYWORDS: Near-Field Optics; Apertureless SNOM; Scanning Head

  JOURNAL NAME: Modern Instrumentation, Vol.2 No.2, April 30, 2013

  ABSTRACT: The design and characterization of a tip control unit for an apertureless scanning near field optical microscope (ASNOM) is reported. To make the instrument operation easier, the cantilever control parts (piezo excitation of the cantilever vibration for the dynamic mode feedback and the parts necessary for the optical lever scheme of the vibration control) were placed in a separate detachable assembly. To suppress the influence of vibrations of the setup, the assembly was made lightweight. Good optical access to the ASNOM tip from various directions is provided in the system. High long-term mechanical stability of the system (~50 nm lateral drift in 18 hours) as well as low sensitivity to seismic vibrations (~400 pm RMS) is demonstrated. It is shown that external sound is not a main source of noise in the topography image (~200 pm RMS). The light field distribution (with its amplitude and phase) around the ASNOM tip was acquired by scanning the focal spot around the tip, and a high optical quality of the system is demonstrated.