Article citationsMore>>

S. Y. Wen, Y. C. Shin, J. Y. Murthy and P. E. Sojka, “Modeling of Coaxial Powder Flow for the Laser Direct Deposition Process,” International Journal of Heat and Mass Transfer, Vol. 52, No. 25-26, 2009, pp. 5867-5877.

has been cited by the following article:

• TITLE: Numerical Study to Represent Non-Isothermal Melt-Crystallization Kinetics at Laser-Powder Cladding

  AUTHORS: V. G. Niziev, F. Kh. Mirzade, V. Ya. Panchenko, M. D. Khomenko, R. V. Grishaev, S. Pityana, C. V. Rooyen

  KEYWORDS: Laser Cladding; Numerical Modeling; Kinetics of Phase Change

  JOURNAL NAME: Modeling and Numerical Simulation of Material Science, Vol.3 No.2, April 30, 2013

  ABSTRACT: The study of laser-powder cladding process subject to heat transfer, melting and crystallization kinetics has been carried out numerically and experimentally. The Kolmogorov-Avrami equation was applied to describe the kinetics of the phase transitions. Characteristic behavior of temperature and conversion fields has been analyzed. Melt pool dimensions,clad height dependences on mass feed rate, laser power and scanning velocity have been investigated. It has been demonstrated that the melt zone has the boundary distinct from the melting isotherm due to the fact that melting occurs with superheating and crystallization takes place at undercooling. The calculated melt pool depth and clad height are in a good agreement with the experimental results.