Article citationsMore>>

A. Obata, S. Kasamatsu, D. W. McCarthy, M. J. Welch, H. Saji, Y. Yonekura and Y. Fujibayashi, “Production of Therapeutic Quantities of 64Cu Using a 12 MeV Cyclotron,” Nuclear Medicine and Biology, Vol. 30, No. 5, 2003, pp. 535-539. doi:10.1016/S0969-8051(03)00024-6

has been cited by the following article:

• TITLE: Production and Quality Control of 64Cu from High Current Ni Target

  AUTHORS: A. H. Al Rayyes, Y. Ailouti

  KEYWORDS: 64Cu; Targetry; Radioisotope Production; Ion Exchange Chromatography

  JOURNAL NAME: World Journal of Nuclear Science and Technology, Vol.3 No.2, April 30, 2013

  ABSTRACT: A new production method of no-carrier-added 64Cu was tested using a new target prepared by electroplating of Ni on a silver layer (thickness 35 μm) previously electroplated on a pure copper target support. This method meets cost effective production and quality of the produced 64Cu criteria. The quality of the electroplated layers has been tested under the bombardment by more than 200 μA of proton beam using water cooled target system. A separation and purification setup was elaborated to produce high quantity and high specific activity of 64CuCl2 suitable for labeling different ligands in order to be used in therapy and diagnosis. A semi-automated target dissolution and separation system has been developed and achieved for 64Cu production. The separation chemistry is based on a chromatographic column system.