Article citationsMore>>

S. L. Qiu, C. S. Wang, Y. T. Wang, C. G. Liu, H. F. Chen, X. Y. Xie, Y. A. Huang and R. S. Cheng, “Effects of Graphene Oxides on the Cure Behaviors of a Tetrafunctional Epoxy Resin,” eXPRESS Polymer Letters, Vol. 5, No. 9, 2011, pp. 809-818.

has been cited by the following article:

• TITLE: Effect of Carboxyl Functionalized MWCNTs on the Cure Behavior of Epoxy Resin

  AUTHORS: Nusrat Jahan, Alfred-Tcherbi Narteh, Mahesh Hosur, Muhammad Rahman, Shaik Jeelani

  KEYWORDS: Carbon Nanotubes; DSC; Steric Hindrance; Peak Temperature; Activation Energy

  JOURNAL NAME: Open Journal of Composite Materials, Vol.3 No.2A, April 30, 2013

  ABSTRACT: Effects of carboxyl functionalized MWCNTs on the cure behavior of epoxy resin (EPIKOTETM resin 862 and EPICURETM curing agent W) were investigated by using differential scanning calorimeter in dynamic scan mode. Results indicated that nanotubes could initiate cure reaction at lower temperature while only 0.1 wt% samples were able to suppress the peak temperature (Tp) consistently regardless of different heating rate due to their higher reaction rate, other two batches (0.2 wt% and 0.3 wt% CNT) showed hardly any change in Tp compared to neat samples. Furthermore, addition of small amount (0.1 wt%) of CNTs significantly reduced the activation energy of the system but further addition elevated that due to their retarding effect. Also, a correlation was established between the dispersion state of CNTs in epoxy and total heat of reaction (ΔH) where lower ΔH was considered as an indication of better interfacial interaction of CNTs with matrix and hence, better dispersion. The difference in curing behavior of three different CNT percentages was discussed in terms of their steric hindrance and state of dispersion in the matrix.