Article citationsMore>>

T. Inoue and T. Suzuki, “Selective Crosslinking Reaction in Polymer Blends. III. The Effects of the Crosslinking of Dispersed EPDM Particles on the Impact Behavior of PP/EPDM Blends,” Journal of Applied Polymer Science, Vol. 56, No. 9, 1995, pp. 1113-1125. doi:10.1002/app.1995.070560911

has been cited by the following article:

• TITLE: Effect of Curing Poly(p-Phenylene Sulfide) on Thermal Properties and Crystalline Morphologies

  AUTHORS: Sungho Lee, Do-Hwan Kim, Jae-Ha Park, Min Park, Han-Ik Joh, Bon-Cheol Ku

  KEYWORDS: Poly(p-Phenylene Sulfide); Thermal Curing; Non-Isothermal Crystallization; Cross-Linking; Crystalline Morphologies

  JOURNAL NAME: Advances in Chemical Engineering and Science, Vol.3 No.2, April 29, 2013

  ABSTRACT: Commercial poly(p-phenylene sulfide) (PPS) was thermally cured, which resulted in an increase of molecular weight due to cross-linking. Non-isothermal crystallization studies of samples cured for up to 7 days at 250?C showed a monotonous increase of crystallization temperature compared to pure PPS. However, a further increase of curing time decreased the crystallization temperature. The change in the half-crystallization time (t1/2) was similar to the crystallization temperature. Thus, the cross-linking of PPS affected crystallization behaviors significantly. To a certain extent, crosslinks acted as nucleation agents, but excessive cross-linking hindered the crystallization. Morphologies observed by polarized optical microscopy suggested that thermal curing for as little as 1 day contributed to the spherulitic structure having a smaller size, that was not observed with pure PPS.