Article citationsMore>>

I. Karaman, H. Sehitoglu, A. J. Beaudoin, Y. Chumlyakov, H. J. Maier and C. N. Tomé, “Modeling the Deformation Behavior of Hadfield Steel Single and Polycrystals Due to Twinning and Slip,” Acta Materialia, Vol. 48, No. 9, 2000, pp. 2031-2047. doi:10.1016/S1359-6454(00)00051-3

has been cited by the following article:

• TITLE: On the Comparison of Microstructure Characteristics and Mechanical Properties of High Chromium White Iron with the Hadfield Austenitic Manganese Steel

  AUTHORS: Johnson O. Agunsoye, Talabi S. Isaac, Agbeleye A. Abiona

  KEYWORDS: High Chromium White Iron; Hadfield Steel; Microstructure; Wear

  JOURNAL NAME: Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.1, January 28, 2013

  ABSTRACT: In this study, high chromium white iron (HC-Wi) alloy and the Hadfield steel were studied. The microstructure of this high-chromium iron was studied using Metallurgical optical microscopy (OM) and compared to the Hadfield steel. The hardness and unnotched charpy impact strength of the HC-Wi alloy and Hadfield steel were examined at ambient temperature in the as-cast and heat-treated conditions. A pin-on-disc test at linear speed of 1.18 m/s and a 10 N normal load was employed to evaluate the wear behavior of both steel samples. Microstructural results showed that varying the carbon level in HC-Wi alloys can affect the chromium carbide morphology and its distribution in the austenite matrix which leads to considerable changes of the mechanical properties. Abrasion test showed that HC-Wi alloys have superior wear resistance, about three times of the Hadfield steel.