TITLE:
Dust Effect on the Performance of Wind Turbine Airfoils
AUTHORS:
Nianxin Ren, Jinping Ou
KEYWORDS:
NACA 63-430 Airfois, Lift Coefficient, Drag Coefficient, Roughness Height, Roughness Area, Roughness Location
JOURNAL NAME:
Journal of Electromagnetic Analysis and Applications,
Vol.1 No.2,
June
25,
2009
ABSTRACT: The full two-dimensional Navier-Stokes algorithm and the SST k-? turbulence model were used to investigate incom-pressible viscous flow past the wind turbine two-dimensional airfoil under clean and roughness surface conditions. The NACA 63-430 airfoil is chosen to be the subject, which is widely used in wind turbine airfoil and generally located at mid-span of the blade with thickness to chord length ratio of about 0.3. The numerical simulation of the airfoil under clean surface condition has been done. As a result, the numerical results had a good consistency with the experimental data. The wind turbine blade surface dust accumulation according to the operational periods in natural environment has been taken into consideration. Then, the lift coefficients and the drag coefficients of NACA 63-430 airfoil have been computed under different roughness heights, different roughness areas and different roughness locations. The role that roughness plays in promoting premature transition to turbulence and flow separation has been verified by the numeri-cal results. The trends of the lift coefficients and the drag coefficients with the roughness height and roughness area increasing have been obtained. What’s more, the critical values of roughness height, roughness area, and roughness location have been proposed. Furthermore, the performance of the airfoil under different operational periods has been simulated, and an advice for the period of cleaning wind turbine blades is proposed. As a result, the numerical simula-tion method has been verified to be economically available for investigation of the dust effect on wind turbine airfoils.