Article citationsMore>>

M. A. Demir and A. Ozen, “A Novel Variable Step Size Adjustment Method Based on Autocorrelation of Error Signal for the Constant Modulus Blind Equalization Algorithm,” Radioengineering, Vol. 21, No. 1, 2012, pp. 37-45.

has been cited by the following article:

• TITLE: Two Blind Adaptive Equalizers Connected in Series for Equalization Performance Improvement

  AUTHORS: Monika Pinchas

  KEYWORDS: Blind Adaptive Equalizers; Blind Adaptive Deconvolution; Equalization Performance; Variable Step-Size

  JOURNAL NAME: Journal of Signal and Information Processing, Vol.4 No.1, February 27, 2013

  ABSTRACT: A variable step-size parameter is usually used to accelerate the convergence speed of a blind adaptive equalizer with N1 + N2 －1 coefficients where N1 and N2 are odd values. In this paper we show that improved equalization performance is achieved when using two blind adaptive equalizers connected in series where the first and second blind adaptive equalizer have N1 and N2 coefficients respectively compared with the case where a single blind adaptive equalizer is applied with N1 + N2 －1 coefficients. It should be pointed out that the same algorithm (cost function) is used for updating the filter taps for the different equalizers and that a fixed step-size parameter is used. Simulation results show that for the low signal to noise ratio (SNR) environment and for the case where the convergence speed is slow due to the channel characteristics, the new method has a faster convergence speed with a factor of approximately two while leaving the system with approximately the same or lower residual intersymbol interference (ISI).