Article citationsMore>>

C. Vigreux, B. Deneuve, J. El Fallah and J.-M. Haussonne, “Effect of Acceptor and Donor Additives on the Proper ties of MgTiO3 Ceramics Sintered under Reducing At mosphere,” Journal of the European Ceramic Society, Vol. 21, No. 10-11, 2001, pp. 1681-1684. doi:10.1016/S0955-2219(01)00092-9

has been cited by the following article:

• TITLE: Humidity Sensitive Characteristics of Porous Li-Mg-Ti-O-F Ceramic Materials

  AUTHORS: Ahmad Kassas, Jérôme Bernard, Céline Lelièvre, David Houivet, Hassan Lakiss, Tayssir Hamieh

  KEYWORDS: Ceramic Humidity Sensor; Magnesium Titanate; Li2MgTiO4; Capacitance; Resistance

  JOURNAL NAME: American Journal of Analytical Chemistry, Vol.4 No.2, February 26, 2013

  ABSTRACT: Ceramic porous MgTiO3 materials have been prepared by classical solid-state route. The sintered pellets of MgTiO3 with different LiF contents were characterized for humidity-sensing application. The sintered disks of these mixtures were subjected to capacitance measurements at 20℃as function of the relative humidity from which revealed that the Mixture MgTiO3 + 2% LiF (w/w) has the better characteristics. The disks were subjected to DC resistance measurements as a function of relative humidity in the range 15% - 95% RH. The selectivity of this material was discussed and compared to commercial sensor results. The response and recovery characteristics were assessed.