TITLE:
Fracture Toughness Studies of Polypropylene- Clay Nanocomposites and Glass Fibre Reinfoerced Polypropylene Composites
AUTHORS:
A. Ramsaroop, K. Kanny, T. P. Mohan
KEYWORDS:
Fibre Reinforced Composites, Polymer Clay Nanocomposites, Stress Intensity Factor, Crack Growth, Crack Initiation, Fracture Toughness
JOURNAL NAME:
Materials Sciences and Applications,
Vol.1 No.5,
December
1,
2010
ABSTRACT: In this paper, a comparative study on the fracture toughness of woven glass fibre reinforced polypropylene, chopped glass fibre reinforced polypropylene and nanoclay filled polypropylene composites is presented. Nanoclays (Cloisite 15A) of 1 wt. % to 5 wt. % were filled in polypropylene (PP) matrix and they were subjected to fracture toughness stu-dies. The specimen with 5 wt. % nanoclay showed 1.75 times and 3 times improvement in critical stress intensity factor (KIC) and strain energy release rate (GIC), respectively, over virgin PP. On the other hand, 3 wt. % nanoclay PP composites showed superior crack containment properties. These structural changes of composite specimens were examined using Transmission Electron Microscopy (TEM) and X-ray diffraction (XRD) methods. It showed that exfoli-ated nanocomposite structures were formed up to 3 wt. % nanoclay, whereas, intercalated nanocomposite structures formed above 3 wt. % nanoclay in the PP matrix. Furthermore, the woven fibre reinforced PP composites demonstrated superior crack resistant properties than that of clay filled nanocomposites and chopped fibre PP composites. However, KIC and GIC values for woven fibre composites were lesser than that of chopped fibre composites. Moreover, KIC and GIC values for both nanoclay filled PP composites and woven fibre composites are comparable even though the clay filled PP demonstrated catastrophic failure. Also, the crack propagation rate of PP-nanoclay composites is comparable to that of chopped fibre composites.