TITLE:
Effects of Pressure during Preform Densification on SiC/SiC Composites
AUTHORS:
Naofumi Nakazato, Akira Kohyama, Yutaka Kohno
KEYWORDS:
SiC/SiC Composites; NITE Method; Near-Net Shaping; Preform Densification
JOURNAL NAME:
Open Journal of Inorganic Non-metallic Materials,
Vol.3 No.1,
January
29,
2013
ABSTRACT: The nano-infiltration and transient eutectic-phase (NITE) method is one of the most attractive methods for fabrication of SiC and SiC/SiC composites. In the NITE method, preform densification is essential option for damage less near-net shaping technique. However, optimization of preform densification is insufficient yet. The objective of this study is to evaluate the effects of pressure during preform densification on SiC/SiC composites. The preform before preform densification has many pores in the inter-prepreg sheets. These pores were disappeared by preform densification. As the effects of pressure on preform, densification in the intra-fiber-bundle was improved due to increasing pressure. Flexural strength of the preforms with 1 MPa and 17 MPa indicated almost same value. The result suggested that increasing of pressure did not cause any change in fiber properties. In the effects of pressure on the composites, the composites with 17 MPa was exhibited improvement in bulk density and mechanical property, compared with that with 1 MPa.