Article citationsMore>>

XUY and Chung D.D.L, “Low Volume Fraction Particulate Performs for Making Metal-Matrix Composites by Liquid Metal Infiltration”, Journal of Material Science, Vol. 33, No. 19 1998, pp. 4707-4709. doi:10.1023/A:1004480819365

has been cited by the following article:

• TITLE: Corrosion Behaviour of Al6061-Frit Particulate Metal Matrix Composites in Sodium Chloride Solution

  AUTHORS: Dasappa Ramesh, Ragera Parameshwarappa Swamy, Tumkur Krishnamurthy Chandrashekar

  KEYWORDS: Al6061 Alloy; Frit; Stir Casting; Potentiostat; Corrosion Rate (mmpy)

  JOURNAL NAME: Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.1, January 26, 2013

  ABSTRACT: In this investigation, an attempt has been made to develop Al6061-Frit particulate metal matrix composites through stir casting technique using metal molds and to study the corrosion behaviour. Pre heated frit particles were added to matrix as reinforcement. Al6061 containing 2 wt% to 8 wt % in steps of 2 wt % of frit particulate composites were prepared. Corrosion tests were conducted by using Potentiostat model SEP238C where 3.5% NaCl solution was used as corrodent. The corrosion rate of metal matrix composites was lower than that of matrix material Al6061 under the corrosive atmosphere for both un-heat treated and heat treated conditions.