Article citationsMore>>

Hong Chang, Rebecca Higginson, Jon Binner, “Microstructure and property characterisation of 3-3 Al(Mg)/Al2O3 interpenetrating composites produced by a pressureless in?ltration technique”, Journal of Materials Science, vol. 45, pp.662-688, October 2010.

has been cited by the following article:

• TITLE: AlSi11/ Si3N4 Interpenetrating Composites Tribology Properties of Aluminum Matris Composites

  AUTHORS: Hongyan Wang, Shouren Wang, Gaozhi Liu, Yingzi Wang

  KEYWORDS: Interpenetrating Composites; Si3N4; Aluminum; Network Structure; Tribology

  JOURNAL NAME: Advances in Materials Physics and Chemistry, Vol.2 No.4B, January 16, 2013

  ABSTRACT: In present work, the metal-ceramic interpenetrating composites (IPCs) as AlSi11/ Si3N4 are fabricated by infiltrating technique. IPCs exhibit special characterization of brittle ceramic reinforced phase introduced by ductile metal matrix phase. During the sliding wear processes, IPCs exhibit four wear mechanism such as initial adhesive wear, mixed adhesive and abrasive wear, adhesive wear and final abrasive wear. Reinforcements inhibit plastic flow and restrict propagation of wear cracks. Increase in the volume fraction of reinforcement leads to improvement in the wear resistance. Under higher load and lower round speed conditions, the friction coefficients are lower than that of relative conditions.