Article citationsMore>>

M. Awano, H. Takagi, Y. Kuwahara Grinding effects on the synthesis and sintering of cordierite J. Am. Ceram. Soc., 75, 9, pp. 2535–2540, 1992.

has been cited by the following article:

• TITLE: Development And Characterization of Ultra Low Cement Castable Cordierites by Thixotropic Properties Mixtures

  AUTHORS: Ana M. Paniagua-Mercado, Arturo Méndez-Sánchez, Elvia Díaz Valdés, Concepción Mejía García

  KEYWORDS: Reology; Thixotropic Mixtures; Ultra Low Cement Castables; Cordierite

  JOURNAL NAME: Advances in Materials Physics and Chemistry, Vol.2 No.4B, January 16, 2013

  ABSTRACT: The main target in this investigation was to take advantage of the reology properties of the tixotropic mixes in Ultra Low Cement Castables (ULCC). The cordierite phase in refractory mix can be obtained using raw materials with magnesium oxide in its composition, such as, Mg(OH)2 or H2Mg3(SiO3)4 (Talc mineral), with a content of 63.5% SiO2, 31.7% MgO and 4.8% H2O. In this investigation, as magnesium source, a commercial calcined magnesite with 90% MgO was used. This mineral was selected instead of Talc mineral, because this last contains more impurities in its composition that tend to form more amounts of liquid phases with low fusion points. For this work two different ULCC mixes were designed. These were fired at 1260 oC, the cordierite phase was quantified in each mix.