Article citationsMore>>

S. Boutaleb, F. Za?ri, A. Mesbah, M. Na?t-Abdelaziz, J. M. Gloaguen, T. Boukharouba and J. M. Lefebvre, “Micromechanics-Based Modelling of Stiffness and Yield Stress for Silica/Polymer Nanocomposites,” International Journal of Solids and Structures, Vol. 46, No. 7-8, 2009, pp. 1716-1726.

has been cited by the following article:

• TITLE: Using Image Analysis for Structural and Mechanical Cha-racterization of Nanoclay Reinforced Polypropylene Com-posites

  AUTHORS: Turup Pandurangan Mohan, Krishnan Kanny

  KEYWORDS: Polymer Clay Nanocomposites, Transmission Electron Microscope, Optical Microscope, Intercalation/Exfoliation, Micromechanical Modeling

  JOURNAL NAME: Engineering, Vol.2 No.10, November 29, 2010

  ABSTRACT: This paper focuses on the micromechanical study of the tensile property of Polymer-Clay Nanocomposites (PCN). Polypropylene (PP) filled with nanoclay is chosen as the PCN. Measurements of optical dispersion parameters (as discussed by Basu et al., namely, exfoliation number (ξn), degree of dispersions (χ) and agglomerate %) in PCN system were carried out using Transmission Electron Microscopy (TEM) and Optical Microscopy (OM). The experimentally obtained tensile modulus is compared with theoretically obtained modulus values from the optical dispersion parameters and observed a close matching between these values. Also, the tensile values are compared with other standard theoretical models and observed that the results obtained from optical dispersion parameters are suited well with experimental results.