Article citationsMore>>

M. S. Loveday, G. J. Mahon, B. Roebuck, A. J. Lacey, E. J. Palmiere, C. M. Sellars and M. R. van der Winden, “Measurement of Flow Stress in Hot Plane Strain Compression Tests,” Materials at High Temperatures, Vol. 23, No. 2, 2006, pp. 85-118. doi:10.3184/096034006782739394

has been cited by the following article:

• TITLE: Modelling of Al-Cu-Mg-Fe-Ni Aluminium Alloy

  AUTHORS: Dhia Kadhm Suker

  KEYWORDS: Al-Cu-Mg-Fe-Ni Aluminium Alloy; Hot Deformation; Modelling

  JOURNAL NAME: Open Journal of Metal, Vol.2 No.4, December 12, 2012

  ABSTRACT: Hot deformation characteristics of Al-Cu-Mg-Fe-Ni aluminium alloy have been studied in the temperature range 350°C - 450°C and strain rate range 0.001 - 0.4 s-1 using hot compression tests. The experimental results were used to develop a model for predicting the material characteristics during hot deformation. A series of plane-strain compression (PSC) tests were carried out at 950°C and a strain rate of 0.1, 1 and 10 s-1 to several strain levels.