Article citationsMore>>

R. S. Vajjha, D. K. Das and P. K. Namburu, “Numerical Study of Fluid Dynamic and Heat Transfer Performance of Al2O3 and CuO Nanofluids in the Flat Tubes of a Radiator,” International Journal of Heat and Fluid Flow, Vol. 31, No. 4, 2010, pp. 613-621. doi:10.1016/j.ijheatfluidflow.2010.02.016

has been cited by the following article:

• TITLE: Numerical Study on Application of CuO-Water Nanofluid in Automotive Diesel Engine Radiator

  AUTHORS: Navid Bozorgan, Komalangan Krishnakumar, Nariman Bozorgan

  KEYWORDS: Automotive Diesel Engine Radiator; CuO-Water Nanofluid; Turbulent Flow; Heat Transfer; Pumping Power

  JOURNAL NAME: Modern Mechanical Engineering, Vol.2 No.4, November 28, 2012

  ABSTRACT: Application of CuO-water nanofluid with size of the nanoparticles of 20 nm and volume concentrations up 2% is numerically investigated in a radiator of Chevrolet Suburban diesel engine under turbulent flow conditions. The heat transfer relations between airflow and nanofluid coolant have been obtained to evaluate local convective and overall heat transfer coefficients and also pumping power for nanofluid flowing in the radiator with a given heat exchange capacity. In the present study, the effects of the automotive speed and Reynolds number of the nanofluid in the different volume concentrations on the radiator performance are also investigated. The results show that for CuO-water nanofluid at 2% volume concentration circulating through the flat tubes with Renf = 6000 while the automotive speed is 70 km/hr, the overall heat transfer coefficient and pumping power are approximately 10% and 23.8% more than that of base fluid for given conditions, respectively.